• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.77-91
• /
• 2000

Rock joint survey consists of measurement of orientation and face mapping for trace informations. We have developed a new alternative approach called rock joint survey system by stereophotogrammetry and image processing to replace the conventional manual method. For the measurement of orientations and face mapping, we applied a stereophotogrammetry and developed two hybrid approaches using image processing techniques, respectively. These methods have advantages in making it possible to measure the orientations of joints and perform face mapping rapidly and objectively in unaccessible and dangerous areas.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.277-280
• /
• 2006

항공사진이나 인공위성 영상을 이용하여 DEM을 생성하는 연구는 전통적으로 사진측량학 분야에서 이루어져 왔다. 즉, 항공기 및 위성을 이용하여 획득한 입체의 영상자료를 이용하여 DEM을 생성하는 기법은 전통적으로 행해져 왔고 최근에 들어서는 LIDAR를 이용하여 1m 급 이상의 정밀 DEM이 획득되고 있다. 그러나 자국 이외 지역에 대한 DEM 자료를 획득하는 일은 위성 및 항공기를 이용한 입체쌍의 영상자료, 기준점 등의 자료를 얻기가 힘들기 때문에 공간해상도가 90m인 USGS에서 제공하는 SRTM자료를 활용해야 하는 등 제한적이다. 이에, 본 연구에서는 공간해상도 15m의 DEM 생성이 가능한 ASTER 영상을 이용하여 중국지역에 대한 정밀 DEM을 생성하고자 하였다. ASTER 영상은 가시광선대, 적외선대 및 열밴드의 정보를 제공하고 있을 뿐만 아니라 DEM 제작을 위하여 위성진행 경로에 정방향 및 역방향의 입체 영상을 제공하고 있다. 이러한 ASTER 영상의 센서 정보와 접합점을 이용하여 DEM을 생성하였고, 이를 SRTM 자료와 동기화 하여 두 자료를 비교 분석하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.153-159
• /
• 2004

Recently remote sensing technology is applied for digital and photographical data acquisition by use of satellites sensors. And It used for images restoration of vanished spatial information at the same sites according to changed of time and spaces. In this study, it applied for the 3-dimensional images generation and fly simulation to possibility for various application. As a results of its applied, it gained the results not only improvement of present methods but also real various application possibilities for 3 dimensional Image restoration.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.411-416
• /
• 2003

다목적 대형 댐의 건설로 수몰된 과거의 삶의 공간을 20년이 지나서 다시 복원한다는 것은 그곳에 살던 실향민 등에게는 참으로 반가운 소식이다. 본 연구에서는 1980년대 초에 완공된 충주댐으로 인하여 물 속에 잠긴 청풍 지구를 수몰이전의 입체 지형 공간적으로 원형복원하기 위한 원격탐사 기법을 적용한 것이다. 비교적 해상도가 좋은 인공위성 사진자료와 원격탐지된 디지털 영상자료를 수집하고, 수몰직전에 제작된 지형도를 이용하여 위성영상자료의 통합 적용하여 수몰이전의 지형공간정보를 현재시간으로 영상 복원하는 실험을 한 것이다. 이를 위하여 지형도에서 추출한 등고선과 현재의 등고선과의 접목을 통하여 청풍 주변지역을 중심으로 당시의 수치표고모형을 생성하였다. 또한 이를 입체적으로 보여주기 위한 투시조감도를 각 방향에서 생성함으로서 수몰이전의 아름다운 모습을 3차원적으로 영상복원 하였다. 좀더 가깝게 수몰마을을 보기 위한 최근접 시뮬레이션 동영상을 제작하여 과거 기억 속의 고향을 찾아볼 수 있도록 한 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.399-404
• /
• 2002

In this study, it was intended to present solution for learners to understand and utilize photogrammetry more easily using economic medium except expensive measuring equipment. For this, 3D point data was analysed by generating event to stereo image on monitor, and input to CAD system automatically. so, real time vector editing and drawing with coordinates measurement were possible. The system was verified, and the monitoring for real construction was performed. so, it is expected to be utilized as a practical use software in related fields.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1016-1019
• /
• 2009

Detailed survey of the rock mass is essential for design, construction and maintenance of rock slope. However, geological survey of poor outcrops and various geophysical aids provides limited information for slope engineering. Remote measurement system for excavation surface (Surface Mapper) and projection s/w for borehole data (Fracjection) are developed for further support of slope surveying. The Surface Mapper measures orientation of joint, fault, foliation on excavated rock surface and database the measured data. The Fracjection projects measurements in boreholes, which are obtained by BIPS, Televideo and DOM operation, to any expected excavation space. These methods promise new approaches for surveying, designing, constructing and maintaining processes of slope.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.495-507
• /
• 2023

The roughness of discontinuity significantly influences the mechanical characteristics of rock masses and extensively affects thermal and hydraulic behaviors. In this study, we utilized photogrammetry to generate 3D point cloud data for discontinuity and applied this data to characterize the roughness of discontinuity. The discontinuity profiles, reconstructed from the 3D point cloud data, were compared with those manually measured using a profile gauge. This comparison served to validate the accuracy and reliability of the acquired point cloud data in replicating the actual configurations of rock surfaces. Subsequent to this validation, influence of the number of profiles for representative JRC assessment was further investigated followed by suggestion of roughness anisotropy evaluation method with application of it to actual rock discontinuity surfaces.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1139-1149
• /
• 2017

Measuring tree's volume is very important input data of various environmental analysis modeling However, It's difficult to use economical and equipment to measure a fragmented small green space in the city. In addition, Trees are sensitive to seasons, so we need new and easier equipment and quantification methods for measuring trees than lidar for high frequency monitoring. In particular, the tree's size in a city affect management costs, ecosystem services, safety, and so need to be managed and informed on the individual tree-based. In this study, we aim to acquire image data with UAV(Unmanned Aerial Vehicle), which can be operated at low cost and frequently, and quickly and easily quantify a single tree using SfM-MVS(Structure from Motion-Multi View Stereo), and we evaluate the impact of reducing number of images on the point density of point clouds generated from SfM-MVS and the quantification of single trees. Also, We used the Watertight model to estimate the volume of a single tree and to shape it into a 3D structure and compare it with the quantification results of 3 different type of 3D models. The results of the analysis show that UAV, SfM-MVS and solid model can quantify and shape a single tree with low cost and high time resolution easily. This study is only for a single tree, Therefore, in order to apply it to a larger scale, it is necessary to follow up research to develop it, such as convergence with various spatial information data, improvement of quantification technique and flight plan for enlarging green space.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.141-149
• /
• 2010

Three-dimensional geo-spatial information is important for the efficient use and management of the country and the three-dimensional expression and analysis of urban projects, such as urban plans devised by local governments and urban management. Thanks to the revitalization of the geo-spatial information service industry, it is now being variously used not only in public but also private areas. For the creation of high-guiltily three-dimensional geo-spatial information, emphasis should be placed on not only the quality of the source image and three-dimensional geo-spatial model but also the level of visualization, such as level of detail and texturing. However, in the case of existing three-dimensional geo-spatial information, its establishment process is complicated and its data are not updated frequently enough, as it uses ready-created digital maps. In addition, as it uses Ortho Images, the images exist Relief displacement. As a result, the visibility is low and the three-dimensional models of artificial features are simplified to reach LoD between 2 and 3, making the images look less realistic. Therefore, this paper, analyzed the quality of three-dimensional geo-spatial information created using the three-dimensional modeling technique were applied using Digital photogrammetry technique, using digital aerial photo images by an existing large-format digital camera and multi-looking camera. The analysis of the accuracy of visualization information of three-dimensional models showed that the source image alone, without other visualization information, secured the accuracy of 84% or more and that the establishment of three-dimensional spatial information carried out simultaneously with filming made it easier to gain the latest data. The analysis of the location accuracy of true Ortho images used in the work process showed that the location accuracy was better than the allowable horizontal position accuracy of 1:1,000 digital maps.