• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.695-701
• /
• 2009

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold flow. In this study, computational approach has been performed to analyze the characteristics of the vortex tube. Energy separation characteristics of the vortex tube has been tested for various geometric design parameters. For the given conditions, it is found that as the tube is lengthened, hot end temperature is reduced but cold end temperature does not influenced much. As the orifice diameter decreases, cold end temperature decreases. Also, as hot gas fraction increases, hot end temperature decreases. The results from this study can be used for the basic design parameter of the $CO_2$ reduction device.

• Geophysics and Geophysical Exploration
• /
• v.21 no.4
• /
• pp.231-243
• /
• 2018

Streaming potential (SP) arises from fluid flow through effectively connected pores. From this potential, formation water information as well as fluid flow properties can be estimated. As micro particles being located in boundary between subsurface porous media and fluid are charged to form electrical double layer, fluid flow caused by several reasons generates SP, one of electrokinetic phenomena. Occurrence mechanism of SP is complex and signal strength is relatively weak compared to noise. However, application of self potential survey using SP to monitoring of formation fluid is expanding because of its' convenience of exploration without artificial source and repetitiveness of signal. This paper accounts for the occurrence mechanism of SP studied before, including governing equations and analyzes previous various case studies of SP according to the change of physical properties of materials. It helps to increase understanding about SP and also lays the foundations of the application of SP to fields.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.141-144
• /
• 2008

Atomization characteristics and spatial distribution of the spray emanating from an injector of liquid-propellant thruster are investigated by using dual-mode phase Doppler anemometry (DPDA). Spray characteristic parameters such as the mean velocity, Sauter mean diameter (SMD), and velocity fluctuation are measured at various locations along the spray axis as well as on the radial direction. Those data are quantified in radial profile and also used to scrutinize the correlation between diameter and turbulence intensity of spray droplets. For the better visual grasp, dynamic behavior of spray droplets along the spray stream is presented through the velocity vectors projected on the plane of geometric axis of nozzle orifice and radial coordinate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.440-444
• /
• 2017

Two-dimensional hydrodynamic analysis was performed to analyze the attenuating characteristics of shock waves generated by the detonation of the bulkhead initiator. Through the interlocking analysis between HNS and HMX stacking initiator and STS bulkhead, we have precisely simulated detonation growth and pressure wave attenuation phenomena. The free surface velocity at the surface of the bulkhead was measured for quantitative comparison with the test data by VISAR. As a result, it was confirmed that the pressure attenuating pattern of the shock wave exponentially decreased according to the bulkhead thickness. The observed inflection point at the particle velocity measured over time is due to the subsequent propagation of the shock wave due to the rapid spallation of the interface between the detonator and the bulkhead.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.263-268
• /
• 2002

본 연구는 고추분쇄용 세라믹 롤 분쇄기를 이용하여 고춧가루 생산시, 분쇄효율을 향상시키고자 기존의 롤 분쇄속도 40rpm(0.352m/s)에서 80rpm(0.704%)으로 증가시키고, 기존의 롤 회전비 2:1에서 5:1로 증가시켜 고추분쇄시 전단력 증가로 분쇄능을 향상시켰고, 연구 내용의 주요 결과를 요약하면 다음과 같다. 1. 세라믹치형롤 분쇄속도 40rpm(0.352m/s)에서는 롤 회전비 2:1에서 1,190$\mu\textrm{m}$ 입자가 32.7%, 590$\mu\textrm{m}$ 입자가 19.7%였고, 롤 회전비를 5:1로 증가시 590$\mu\textrm{m}$ 입자가 30.9%, 420$\mu\textrm{m}$ 입자가 17.2%로 중간 미분쇄 영역의 분포가 증가하여 미분쇄 효율이 향상됨을 알 수 있었다. 2. 분쇄물의 롤 통과횟수에 따른 분쇄능은 세라믹치형롤 모두 분쇄속도 80rpm(0.704m/s)에서 분쇄물의 미분쇄능이 향상되었고, 분쇄생성물의 임계처리 횟수가 3~4차임을 분석할 수 있었다. 3. 보통 고춧가루를 생산하는데 분쇄속도 40rpm(0.352m/s), 80rpm(0.704m/s), 두 롤의 회전비 2:1, 3:1, 4:1하에서는 생산되지 않았으나, 롤 회전비 5:1에서는 분쇄속도 40rpm(0.352m/s)일 경우 7차 분쇄후에, 분쇄속도 80rpm(0.704m/s)일 경우 5차분쇄후에 생성되어 분쇄처리횟수가 2회정도 단축되어 전단력 증가로 인하여 분쇄능이 향상된 것으로 분석되었다. 4. 기존의 고춧가루 분쇄조건인 분쇄속도 40rpm(0.352m/s), 롤 회전비 2:1보다 본 연구에서 개발한 분쇄속도 80rpm(0.704m/s), 롤 회전비 5:1인 분쇄조건이, 분쇄처리 횟수 단축 등이 분석됨으로서 섬유질이 많이 포함된 고춧가루 등의 재료가공 분쇄기술이 향상된 것으로 분석되었다.. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음. the annealing texture. Observations by TEM and EBSD revealed the formation of very fine grains of ∼1.0$\mu\textrm{m}$ after CCSS.he dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$0.24(100%)에 비하여 I3C 저농도 투여 실험군(Group 1; 0.85$\pm$0.23; 61%, P<0.01), 그리고 I3C 고농도 투여 실험군(Group 2 ; 1.32$\pm$0.29 ; 94%)의 순으로 감소하였다. 선종의 크기별 종양의 발생개수의

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.196-201
• /
• 2011

Emission from meat cooking may contribute to the concentration of the Particulate Matters(PM) in the city. This study is to investigate the particle size and the emission characteristics of particulate matters from pork and beef cooking. The chamber was installed for sampling of PM generated from pork belly and beef sirloin cooking including seasoned ones. Cascade Impactor and Portable Aerosol Monitor (PAM) were used to analyse the particle size distribution. At the result of the Cascade Impactor sampling, particulate matters from the pork cooking was higher than that of beef. The gravimetric concentration of PM according to the size was highest at the range of $1.95{\sim}3.2{\mu}m$ and the gravimetric concentration of PM from the non-seasoned meat was higher than that of the seasoned one. The emission factors from pork, pork seasoned, beef and beef seasoned were 1.36 g/kg, 1.03 g/kg, 1.23 g/kg, 0.92 g/kg respectively. To see the result of PAM sampling, the ranges of $1.6{\sim}2.5{\mu}m$ and $2.5{\sim}3.5{\mu}m$ were reveled as highest. The ration of $PM_{2.5}/PM_{10}$ from pork and beef was 0.56~0.58. The emission factors from pork, pork seasoned, beef and beef seasoned measured by PAM were revealed as 3.37 g/kg, 2.76 g/kg, 2.93 g/kg, 2.77 g/kg respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.26.1-26.1
• /
• 2009

최근 반도체 세정에 있어서 지난 40년 동안 지속적으로 사용되고 있는 알칼라인 기반의 RCA 세정법은 많은 초순수 및 화학액 소모량과 세정시 불필요한 박막의 손실, 환경적인 문제로 인하여 이를 대체하고자 하는 새로운 새정액 및 세정 방법에 대한 연구가 활발하게 이루어지고 있다. 특히 초순수에 가스를 혼합하여 메가소닉을 이용한 기능수 세정은 기존 RCA 세정액의 문제점들을 해결하기 위한 세정액으로 최근 반도체 제조 공정 뿐만 아니라 Photo mask, FPD 세정 공정에서 널리 이용되고 있다. 하지만 기능수에 대한 기초적인 특성 연구와 메가소닉에 의한 세정력 변화에 대한 연구는 부족한 상태이다. 본 연구에서는 고순도의 수소가스(99.999%)를 가스 접촉기, pHasorII (Entigris, USA) 와 순환 속도의 조절이 가능한 펌프, BPS-3 (Levitronix, USA) 를 이용하여 지속적으로 초순수와 수소가스를 혼합하는 방법으로 수소수를 제조하였으며, 용존 수소 농도계, DHDI-1 (TOA-DKK, Japan)으로 수소수의 농도를 확인하였다. 0.1 MPa 압력과, 3 LPM의 수소가스 유출속도에서 최대 2.0 ppm의 수소수를 얻을 수 있었으며, 수소수의 기초 특성을 평가하기 위하여 수소 농도 변화에 따른 pH, 표면 에너지를 측정하였다. 또한 압력 변화에 따른 반감기를 측정하여 bath형태의 세정기에서 적용 가능성을 평가하였다. 수소수의 세정력은 $Si_3N_4$ 입자가 임의로 오염된 실리콘 웨이퍼를 이용하여 bath 및 매엽식 세정기에서 수소수 농도와 메가소닉 형태 및 첨가제 변화에 따른 세정효율을 기존의 SC-1 세정액과 각각 비교 평가하였다. 기능수 발생장치에서 압력이 제거된 상태에서는 평균 20분의 반감기를 갖는 것이 관찰되었고, 압력이 유지된 상태에서는 수소수의 농도가 유지되는 것을 확인하였으며, pH의 경우 수소수의 농도가 점차 증가함에 따라 감소하여 2.0 ppm의 농도에서 pH 5.3정도의 값을 나타내었다. 표면 장력은 초순수와 비교했을 때 큰 변화가 없음을 확인할 수 있었다. Bath 형태의 세정기에서 메가소닉을 인가하여 수소수의 세정효율을 측정한 결과, 같은 조건에서 실험한 초순수와는 비슷하며, SC-1보다는 낮은 세정효율이 측정되었다. 반면 매엽식 세정기에서 동등한 조건의 실험을 실시한 결과, 수소수 세정에서 첨가제에 의한 영향으로 SC-1을 대체할 수 있는 높은 입자 제거효율을 가짐을 확인할 수 있었다.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.603-608
• /
• 2005

This study was conducted to investigate particle attrition characteristics in a gas desulfurization using zinc titanate sorbent in a 0.035 m i.d. by 1.34 m height gas fluidized bed reactor. Gas jetting from the distributor and bubbling in the gas fluidized bed were found to be the main causes of particle attrition. The experiment was carried out under a slow attrition rate condition to compare the performance of the batch reactor to that of a continuous reactor. The attrition index (AI) and corrected attrition index (CAI) were measured at various the gas velocity, temperature, pressure, and bed weight, in the gas fluidized bed, during the dexulfurization process. The AI (5) and CAI (5) decreased as the bed weight increased. Particle destruction occurred when the particles started to experience physical fatigue under specific impacts over several iterations. AI (5) and CAI (5) also increased as relative humidity, gas velocity and pressure increased, and as temperature decreased. Particle attrition was mainly affected by gas jetting from the distributor, and abrasion resulted in smaller particles than fragmentation did.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.257-268
• /
• 2003

Daily monitoring was conducted to elucidate the changes in turbidity and distribution of particles in the turbid water of a river-type reservoir (Paltang Reservoir) from 1999 to 2001. Water turbidity and the particle distribution of turbid water were principally affected by meteorological factors particularly rainfall patterns and hydrological factors such as inflow and outflow. The mean concentration of turbidity was constant each year, with the concentration of less than 10 NTU accounting for 85%. Seasonal characteristics were remarkable, with winter and spring having < 5 NTU, autumn 5 ${\sim}$ 10 NTU, and summer > 20 NTU. Unlike hydrological changes, maximum turbidity was observed from late July to early August and continuously increased from 1999 to 2001. In particular, the maximum turbidity of reservoirs remarkably increased toward the lower part of reservoir in 2001. Discharge and turbidity increased or decreased slowly in 1999; in contrast, turbidity rapidly increased in the early rainfall period of 2000 and 2001 but later decreased as discharge increased. In the particles of turbid water, clay ingredients were more densely distributed and more dominant in all stations. Of the total particles in turbid water, clay constituted 63.9${\sim}$66.6% and silt 33.4${\sim}$36.1% to account for a combined total of 98.9 ${\sim}$ 100%. Sand made up less than 1.1%. The turbidity of river-type reservoir was also found to be mainly affected by the biomass of plankton in a non-rainfall period. During a rainfall period, however, the quantity and relative ratio of inorganic particles depending on the soil components affected turbidity.