• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.11
• /
• pp.771-780
• /
• 2001

It is indispensable to use the process and device simulation tool in order to analyze accurately the electrical characteristics of ULSI CMOS devices, in addition to developing and manufacturing those devices. The 3D Monte Carlo (MC) simulation result is not efficient for large-area application because of the lack of simulation particles. In this paper is reported a new efficient simulation strategy for 3D MC ion implantation into large-area application using the 3D MC code of TRICSI(TRansport Ions into Crystal Silicon). The strategy is related to our newly proposed split-trajectory method and ion-splitting method(ion-shadowing approach) for 3D large-area application in order to increase the simulation ions, not to sacrifice the simulation accuracy for defects and implanted ions. In addition to our proposed methods, we have developed the cell based 3D interpolation algorithm to feed the 3D MC simulation result into the device simulator and not to diverge the solution of continuous diffusion equations for diffusion and RTA(rapid thermal annealing) after ion implantation. We found that our proposed simulation strategy is very computationally efficient. The increased number of simulation ions is about more than 10 times and the increase of simulation time is not twice compared to the split-trajectory method only.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.165-174
• /
• 2010

The numerical modeling of a coal gasification reaction occurring in an entrained flow coal gasifier is presented in this study. The purposes of this study are to develop a reliable evaluation method of coal gasifier not only for the basic design but also further system operation optimization using a CFD(Computational Fluid Dynamics) method. The coal gasification reaction consists of a series of reaction processes such as water evaporation, coal devolatilization, heterogeneous char reactions, and coal-off gaseous reaction in two-phase, turbulent and radiation participating media. Both numerical and experimental studies are made for the 1.0 ton/day entrained flow coal gasifier installed in the Korea Institute of Energy Research (KIER). The comprehensive computer program in this study is made basically using commercial CFD program by implementing several subroutines necessary for gasification process, which include Eddy-Breakup model together with the harmonic mean approach for turbulent reaction. Further Lagrangian approach in particle trajectory is adopted with the consideration of turbulent effect caused by the non-linearity of drag force, etc. The program developed is successfully evaluated against experimental data such as profiles of temperature and gaseous species concentration together with the cold gas efficiency. Further intensive investigation has been made in terms of the size distribution of pulverized coal particle, the slurry concentration, and the design parameters of gasifier. These parameters considered in this study are compared and evaluated each other through the calculated syngas production rate and cold gas efficiency, appearing to directly affect gasification performance. Considering the complexity of entrained coal gasification, even if the results of this study looks physically reasonable and consistent in parametric study, more efforts of elaborating modeling together with the systematic evaluation against experimental data are necessary for the development of an reliable design tool using CFD method.

• Journal of the Korean earth science society
• /
• v.35 no.2
• /
• pp.104-114
• /
• 2014

The variation of acidity, conductivity, and ion components in precipitation depending on the dominant wind direction was investigated from January, 2009 to December 2009 in Busan, Korea. Both southwesterly and northeasterly winds were dominant in Busan area. The volume-weighted mean acidity showed pH 7, and the high conductivity indicated 200 ${\mu}scm^{-1}$ in westerly wind. The volume-weighted mean equivalent concentration showed higher value of $K^+$ and $Cl^-$ in all wind directions. The composition ratio of $NO{_3}^-/SO{_4}^{2-}$ showed over 3 in northerly wind. The neutralization factors have been found to have higher value for potassium ion in northeasterly, easterly, southwesterly, and westerly winds compared with different wind directions, which indicated significant neutralization of acidic components over the region by potassium. Also, the concentration of sea salt has been found over 800 ${\mu}sm^{-3}$ in northeasterly and southwesterly winds. Air masses passing through Manchuria, Inner Mongolia plateau, China, and Russia in spring, autumn, and winter covered Busan, Korea in northerly, westerly, and northwesterly winds. However, air masses passing through the ocean in summer covered Busan, Korea in easterly, northeasterly, and southwesterly winds. Therefore, the variation of acidity, conductivity, and ionic components contained in precipitation shows each seasonal characteristics with prevailing wind systems between the continental and coastal area in Busan, Korea.

• Journal of the Korean earth science society
• /
• v.43 no.3
• /
• pp.386-404
• /
• 2022

From April 29 to 30, 2011, under the influence of Asian dust originated from Mongolia, a high concentration of Asian dust was observed nationwide for 4 days in Korea. This study investigated the causes and characteristics of and weather conditions associated with Asian dust at high concentrations at its source in Mongolia. For analysis, Asian dust weather data, Asian dust monitoring tower data, satellite data, backward trajectory data, observation data (PM₁₀ and OPC data), and ECMWF reanalysis data were used. In the synoptic analysis, it was observed that the intervals of isobars were densely distributed in the central region of Mongolia and the pressure gradient force was strong. It could be inferenced that Asian dust occurred due to strong winds. The temperature was relatively high, above 10℃, just before the occurrence of Asian dust, and it decreased sharply at the onset of the dust. The relative humidity had a low value of less than approximately 40%. After the occurrence of Asian dust, it increased sharply to over 50% and then showed a tendency to decrease. In the aerosol index shown by the COMS satellite, a high concentration value of over 25 was detected in Inner Mongolia, and it was consistent with the observations made with naked eyes. In the 72-hour backward trajectory, the northwest airflow streamed into Korea, and on May 2, Heuksando showed the highest PM₁₀ concentration of 1,025 ㎍ m^-3(times the average). Especially, in kinematic vertical analysis, it was observed that low pressure on the ground was strengthened by cyclonic relative vorticity developed in the upper layer. Also, the vertical velocity development is considered to have played a major role in the occurrence of high concentration Asian dust.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.552-559
• /
• 2008

Three dimensional numerical analysis were performed to investigate the combustion characteristics in a tangentially fired pulverized coal boiler. The predicted values at the outlet of economizer for the gas temperature, O$_2$, NO, CO were been compared with the measured data. By using the actual operating conditions of the power plant, the distribution of velocity, gas temperature, O$_2$, CO, CO$_2$ and NO as well as the particle tracking in the boiler were investigated. Throughout the present study, the non-uniform distribution of flue gas temperature in front of the final superheater might be resulted from the residual swirl flow in the upper furnace of the boiler. The present analysis on non-uniform distribution of the gas temperature could provide the useful information to prevent the frequent tube failure from happening in the final superheater of the tangentially coal-fired boiler.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1094-1104
• /
• 2010

In the previous studies, the validation of numerical codes has been conducted based on the qualitative comparison of predicted ice shapes with experiments, which poses a significant limit on the systematic analysis of ice shapes due to the variation of meteorological conditions. In response to this, the numerical code has been quantitatively validated against available experiment for the ice accretion on cylinders and airfoils in the present study. Ice shapes accumulated on the bodies are systematically investigated with respect to various icing parameters. To this end, maximum thickness, heading direction and ice thickness are quantified and expressed in the polar coordinate system for the comparison with other numerical results. By applying the quantitative analysis, similar shapes are intuitively distinguished. The developed numerical code underestimates the ice accretion area and the ice thickness of lower surface. In order to improve the accuracy, further accurate aerodynamic solver is required for the water droplet trajectories.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.1
• /
• pp.25-38
• /
• 1993

Numerical models of directional wave spectra for the analysis of offshore structural cable responses are verified. Alternative spreading models are used to predict wave-induced flows in water and for mooring systems. Hydrodynamic wave forces upon cable are estimated. using a Morison formula encompassing considerations for drag and for inertial forces both parallel and tangential to the slope of the cable. Numerical analysis for directional random waves. including consideration of displacement and velocity, trajectory, phase plane response. and tension are shown for mooring system cable responses at both the tether point for a buoy and at the anchor point. The effects of wave forces far different drag coefficients, various significant wave heights, and selected wave parameters are considered in the analysis. For the specific systems considered in the examples, it is demonstrated that wave period and height as well as wave spreading function parameters and drag coefficients, have an important effect upon the dynamic responses of the cable-buoy systems.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.310-318
• /
• 2011

The collection of atmospheric $PM_{10}$ and $PM_{2.5}$ particle samples was made at Gosan site of Jeju Island, which is one of the most representative background sites in Korea. Their chemical compositions have been analyzed to explore the pollution characteristics and emission sources. The mass concentrations of $PM_{10}$ and $PM_{2.5}$ particles were $37.6{\pm}20.1$ and $22.9{\pm}14.3{\mu}g/m^3$, respectively, with the content of $PM_{2.5}$ to $PM_{10}$ as 61%. The $PM_{2.5}/PM_{10}$ ratios of nss-$SO_4^{2-}$, $NO_3^-$, and $NH_4^+$ were 0.94, 0.56, 1.02, respectively, indicating that these components were distributed mostly in the fine fractions. Based on the factor analysis, it was found that the compositions of fine particles were mainly influenced by anthropogenic sources, followed by soil or marine sources. The results of the backward trajectory analysis indicate that the concentrations of nss-$SO_4^{2-}$, $NO_3^-$, $NH_4^+$, nss-$Ca^{2+}$, and Pb were high when the air parcels moved from the China continent, while relatively low with the air parcels coming from North Pacific Ocean and/or East Sea.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.286-292
• /
• 2005

This study is to investigate the industrial boiler which can be significantly affected by the restriction of NOx. Note that the application of SNCR method to industrial boiler is usually blown as not feasible due to the insufficient residence time for proper mixing. The purpose of this study is to investigate the applicability of the SNCR system application to the industrial boiler, which produces 40 tons of steam per hour using heavy oil. For the industrial boiler with 3-D rectangular coordinate, the general coding are made fur various turbulence modeling such as turbulent flow, turbulent fuel combustion, thermal NO formation and destruction together with the NO reaction with reducing agents. Further, the incorporation of drop trajectory model is successfully made in 3-D rectangular coordinate with Lagrangian frame and the main swirl burner effect on the characteristics of flame is considered. As expected a short flame was created and thereby NOx is removed more efficiently by increasing the proper region of temperature for NO reduction reaction. The validation of program was made successfully by the comparison of experimental data. Based on the reliable calculation results, the SNCR method in a industrial boiler shows the possibility as one of viable NO reduction method by the use of well designed mixing air of reducing agent.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.939-946
• /
• 2011

In thermal power generation companies, the recycling of refined ash (LOI < 6%) obtained from a PC-firing furnace is beneficial for the companies, e.g., it can be used for making lightweight aggregates. However, ash having a high LOI, which cannot be reused, is still buried in the ground. To obtain refined ash, the re-burning of high-LOI ash (LOI > 6%) in a PC-firing furnace can be an alternative. In this study, a numerical analysis was performed to demonstrate the effects of ash re-burning. An experimental constant value was decided by TGA (thermo-gravimetric analysis), and a DTF (drop-tube furnace) was used in the experiment for calculating the combustion of ash. On the basis of the trajectory of the moving particles of coal and ash, it was concluded that supplying ash near the burner, which is located high above the ground, is appropriate. On the basis of numerical results, it was concluded that an ash supply rate of 6 ton/h is suitable for combustion, without affecting the PC-firing boiler.