• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.239-245
• /
• 2002

In this Paper, we present a method for designing fuzzy $H_2/H_{\infty}$ controllers of delayed nonlinear systems with saturating input. Takagi-Sugeno fuzzy model is employed to represent delayed nonlinear systems with saturating input. The fuzzy control systems utilize the concept of the so-called parallel distributed compensation(PDC). Using a single quadratic Lyapunov function, the globally exponential stability and $H_2/H_{\infty}$ performance problem are discussed. And a sufficient condition for the existence of fuzzy $H_2/H_{\infty}$ controllers is given in terms of linear matrix inequalities(LMIs). The designing fuzzy $H_2/H_{\infty}$ controllers minimize an upper bound on a linear quadratic performance measure. Finally, a design example of fuzzy $H_2/H_{\infty}$ controller for uncertain delayed nonlinear systems with saturating input.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.83-90
• /
• 2006

In active vibration control of building, controller design considering both control input saturation of controller and parameter uncertainties of building is needed. In our previous research, we proposed a robust saturation controller which guarantees robust stability and control performance of the uncertain linear time-invariant system in the presence of control input saturation. In this paper, the availability of the robust saturation controller for the building with an active mass damper (AMD) system is verified through experimental tests. Experimental tests are carried oui using a two-story building model with a hydraulic-type AMD.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.93-102
• /
• 2006

Control input's saturation of active control devices for large structures under large external disturbances are often occurred. It is more difficult to obtain the exact values of mass and stiffness as structures are higher. The modelling errors between mathematical models and real structures must be also included as parameter uncertainties. Therefore, in active vibration control of civil engineering structures like buildings and bridges, the robust saturation controller design method considering both control input's saturation and parameter uncertainties of system is needed. In this paper, stabilities of linear optimal controller LQR, modified bang-bang controller, saturated sliding mode controller, and robust saturation controller among various controllers which have been studied and applied to active vibration control of buildings are investigated. Especially, unstable phenomena of the LQR, the modified bang-bang controller and the saturated sliding mode controller when the control input is saturated or parameter uncertainties exist are presented to show the necessity of the robust saturation controller. The robust stability of the robust saturation controller are shown through a numerical example of a 2DOF linear vibrating system and an experimental test of the two-story structure with an active mass damper (AMD).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.5
• /
• pp.22-33
• /
• 2000

Since the heavy-duty power manipulator generally has high ratio gear reducers at its joints, its dynamic characteristics is much slower than that of the master manipulator and it is likely to encounter the saturation in the input magnitude when it is used as the slave manipulator in telemanipulation systems. This paper proposes a force reflecting and compliant control scheme for the heavy-duty power telemanipulator. The main advantage of the proposed scheme is that it provides a precise position and compliant control performance for a telemanipulator with control input saturation. The stability of the proposed scheme is analyzed and a series of experiments shows its performance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.77-88
• /
• 2018

This paper proposes a RBFNN(Radial Basis Function Neural Network) based decentralized adaptive tracking control scheme using PSO(Particle Swarm Optimization) for an uncertain electrically driven robot system with input saturation. Practically, the magnitudes of input voltage and current signals are limited due to the saturation of actuators in robot systems. The proposed controller overcomes this input saturation and does not require any robot link and actuator model parameters. The fitness function used in the presented PSO scheme is expressed as a multi-objective function including the magnitudes of voltages and currents as well as the tracking errors. Using a PSO scheme, the control gains and the number of the RBFs are tuned automatically and thus the performance of the control system is improved. The stability of the total control system is guaranteed by the Lyapunov stability analysis. The validity and robustness of the proposed control scheme are verified through simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.2037-2042
• /
• 2014

Three methods for gain saturation tone application were compared for optical wavelength division multiplexing transmission using more than 32 channels. The methods are to use high power distributed feedback laser diodes, to use amplified light sources, and lastly to use one saturation tone and several WDM light sources. 1532.3 nm, 1545.7 nm, and 1558.2 nm for the wavelength dependency of the saturation tone were also compared. As a result, the effect of amplified spontaneous emission noise caused by an amplifier was very slight. long wavelength for a saturation tone caused 1 dB gain reduction and its reason was analyzed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.13-21
• /
• 2005

This paper presents a fuzzy model-based approach for synchronization of time-delay chaotic system with input saturation. Time-delay chaotic drive and response system is respectively represented by Takagi-Sugeno (T-S) fuzzy model. Specially, the response system contains input saturation. Using the unidirectional linear error feedback and the parallel distributed compensation (PDC) scheme, we design fuzzy chaotic synchronization system and analyze local stability for synchronization error dynamics. Since time-delay in the transmission channel always exists, we also take it into consideration. The sufficient condition for the local stability of the fuzzy synchronization system with input saturation and time-delay is derived by applying Lyapunov-Krasovskii theory and solving linear matrix inequalities (LMI's) problem. A numerical example is given to demonstrate the validity of the proposed approach.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.73-82
• /
• 2004

신호 교차로에서 포화차두시간에 영향을 미치는 영향인자는 도로조건, 교통조건, 환경조건으로 분류된다. 이러한 요인들의 복합적인 관계가 포화차두시간에 영향을 미친다. 현재 포화교통류율은 이상적인 조건일 때의 포화차두시간을 산출하고, 이를 이용해서 기본 포화교통류율을 구하고, 여기에 좌 우회전, 차로폭, 경사, 중차량 보정계수을 고려함으로써 특정 차로군의 포화교통류율을 산정하고 있다. 포화차두시간에 영향을 미치는 인자들 중에서 정량적으로 나타내기 어려운 인자 즉, 퍼지적 성격을 가진 인자들은 고려하지 않고 있다. 따라서 본 연구에서는 퍼지 근사추론 방법을 이용하여 정성적 인자의 영향을 고려한 모형을 구축하였다. 모형의 입력자료는 강우조건과 주변밝기의 정도, 중차량 구성비의 언어적 표현를 사용하였다. 이러한 변수들에 대하여 설문조사를 통해서 퍼지집합의 멤버쉽함수를 설정하였으며. 이에 기초하여 교차로에서 각 조건별로 포화차두시간을 관측하였다. 이러한 현장 관측치를 바탕으로 퍼지 제어규칙을 설정하고 모형을 구축하였다. 모형의 평가는 추론치와 실측치를 비교함으로써 이루어 졌으며, 결정계수인 $R^2$와 평균절대오차(MAE)와 평균제곱오차(MSE)를 사용하여 분석한 결과 본 모형의 설명력이 높은 것으로 평가되었다. 본 연구의 과정에서 강우에 의한 교통용량 감소는 중차량 구성비가 클수록 주변밝기의 정도가 나쁠수록 더욱 큰 것으로 나타났으며 그 감소율은 5.3%에서 21.8%에 이르는 넓은 범위의 값을 보였고. 주변밝기 정도에 따른 교통용량 감소는 4.7$\sim$7.5% 수준으로 나타났다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.19-32
• /
• 2003

In the conventional photorefractive joint transform correlator(PRJTC), the intensity ration of input signal-to-pump beam should be large enough to saturate two-beam coupling transfer function to obtain a desired correlation result. As a result, the signal-to-noise ratio(SNR) of correlation result is decreased in a noisy input image. In this paper, we propose the improved method for increasing the SNR of the PRJTC by using the characteristics of BaTiO$_3$. We stop the energy transfer saturating by low intensity ratio of input beam and realize a short length of effective interaction in BaTiO$_3$ by making large incident angle of the signal beam. So the gain in high frequency area is decreased and the gain in low frequency area comes up to the saturation gain of the beam coupling transfer function. Therefore the SNR is improved in noisy input image and the PRJTC can be easily realized by low intensity ratio of input beam.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.67-73
• /
• 1991

The unsaturated signal gain, signal gain bandwidth, and saturation power which are important parameters determining characteristics of the semiconductor laser amplifier were measured for an AlGaAs Fabry-Perot cavity type laser amplifier and compared with the results of Fabry-Perot formula. The unsaturated signal gain 25 dB is obtained near oscillation thereshold current at $0.7\mu\textrmW$ input power. The corresponding signal gain bandwidth was about 3 GHz. Also. We measured the variation of the saturation signal gain and saturation power.