• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.56-60
• /
• 2004

2단 또는 3단형으로 설계되고 있는 KSLV-I 발사체의 단연결부는 직경의 변화에 따라 원뿔대(Truncated cone) 구조물이 필요하다. 원뿔대형 구조물이 발사체의 외피일 경우에는 일반적인 실린더형 동체와는 다르게 공력에 의한 버페팅(buffeting)과 공력가열 등이 추가적인 설계인자로 고려되어야 한다. 복합재료 샌드위치 구조물은 외피의 굽힘 강성이 크고, 일체성형으로 실린더형 혹은 원뿔대형 구좁물을 쉽게 제작할 수 있어 단연결부에 적용되고 있다. 또한 위성어댑터(Payload Adapter)등에도 사용되어 우주발사체에는 매우 일반적인 구조물이다. 복합재료 샌드위치 구조물의 제작과 정적시험을 통하여 구조 특성을 알아보았다. 일체형 샌드위치 구조물의 효율을 높이기 위해서는 프레임과의 체결부를 효율적으로 설계하여야 하며 하중의 종류에 따라서 면재의 적층각도가 중요함을 알 수 있었다.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.23-29
• /
• 2017

This paper introduces the mold technology for the development of ultra-compact package of less than 1mm, and also analyze the error pattern of the results using this mold technology. The existing ultra-small mold structure was one-piece, which caused the surface of EDM to be rough and increase the error rate. This has been an obstacle to further reducing the size of the mold. On the other hand, the proposed mold technology tries to overcome the limitation of the one-piece type by using the prefabricated type method. This paper also classify defect patterns in the results of the proposed mold structure and analyze the occurrence probability of each pattern to use as a basic data to develop a detector.

• Composites Research
• /
• v.37 no.3
• /
• pp.190-196
• /
• 2024

The bipolar plate is a crucial element of the vanadium redox flow battery (VRFB) as it serves as both the electrical conduit and the structural support for the cell within the VRFB stack. Although, the graphite material is primarily used for the bipolar plate due to its excellent electrical conductivity, a significant limitation of performance of the VRFB is present due to high interfacial contact resistance (ICR) arises between the electrode and bipolar plate in the cell stack. This study aims to develop an integrated electrode-bipolar plate assembly that will address the limitations of the ICR. The integrated assembly was constructed using a single carbon felt with thermoplastic and thermoset polymers utilizing hot press method. Experimental results verify that the bipolar plate assembly exhibits reduced area specific resistance (ASR) due to the continuous electrical path. Additionally, from the charge/discharge cell test results, the integrated assembly shows improved cell performance. Therefore, the developed integrated electrode-bipolar plate assembly can serve as a substitute for the conventional bipolar plate and electrode assembly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.94-105
• /
• 2013

Recently, the construction industry has been changed in such a way that the cost for bridge construction should be optimized or reduced. Therefore, bridges are required be cost-effective in terms of initial construction as well as in the maintenance during service stage. In order to reduce the cost for bridge construction, the Rahmen typed structure, in which the bridge components from superstructure to substructure are integral, has many advantages to reduce the size of structural members including girders, since the loadings from superstructure may be transferred to substructure through the connecting rebars such as stud, etc. This paper studied on the continuous Up and Down Prestressed Concrete (UD PSC) girder bridge in which the reinforced concrete pier cap is integral with the part of girders in superstructure. In previous studies, it is known that the structural behavior of continuous UD PSC girder bridge is quite different compared to the one of the bridges with conventional bearings or shoes to support the loading from girders. Nevertheless, it has hardly been studied about the structural behavior of bridge with UD PSC girder. Therefore, in this study, various dynamic behaviors of continuous UD PSC girder bridge with integral pier cap have been analyzed using numerical method. Furthermore, an equation to evaluate the impact factor is suggested for the UD PSC girder bridge which has two to three continuous spans.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.76-77
• /
• 2018

전자기파 환경을 고려한 장비 개발을 위해서 고려되는 설계 사항 중 하나는 외부의 노이즈가 장비 내부로 유입되지 않도록 하고 반대로 장비 내 발생하는 노이즈가 외부로 나가는 것을 막도록 설계하는 것이다. 이를 위해서 전자기파 환경 규격을 만족하기 위한 장비들은 일반적으로 차폐형 구조로 설계된다. 본 논문은 차폐형 구조 설계 시 가장 노이즈에 취약할 수 있는 커넥터를 필터 일체형으로 설계한 사항과 이를 적용한 신호인입함의 성능 개선 사항에 대해 소개한다.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.232-235
• /
• 2000

본 논문에서는 ITS(Intelligent Transport System) 서비스를 위한 기반시설로 설치 예상되는 DSRC(Dedicated Short Range Communication) 시스템에 대하여 시스템의 개요와 특징 및 DSRC 기지국시스템의 신호흐름에 대하여 살펴보았으며, 일체형과 분리형 DSRC 시스템의 RSU구조에 관해 비교 분석하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.19-22
• /
• 2013

Recently, high speed transmission and large information demand have been increased. Also, researches of integrated optical device for large production and high-efficient planar lightwave circuit (PLC) have been increased. In this paper, integrated optical alignment is proposed which makes passive alignment between optical device and optical fiber possible. The integrated optical device consists of splitter structures which have one input and two outputs. The proposed integrated structure was fabricated by roll-to-roll (RTR) processing method. This method enables to manufacture continuously and the processing time can be shortened. Optical property of the fabricated optical device showed 3.9 dB insertion loss and 0.2 dB optical uniformity using the light source with 1550 nm wavelength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.324-328
• /
• 2019

There are several dedicated individual chambers for sports that are supplied and used, but none of them are multi-pressured all-in-one chambers that can provide a sport-multi environment simultaneously. In this study, we design a multi-pressure (positive / atmospheric / negative pressure) integrated chamber that can be used for the sport-multi-artificial environment system. We presented new chamber designs with enlarged space for the tall users and then carried out structural analysis with maximum stress and structural safety. Under the targeted allowable pressure conditions, maximum stresses occurred at the joint of the shell and the entrance, the structural safety of the chamber was evaluated with the allowable stress of its material. As a result of the structural analysis of the multi-pressure integrated chamber, the maximum stress for the positive pressure and negative pressure conditions was much smaller than the allowable stress of its material. And as a result of the structural safety evaluation, it was confirmed that the design of the final prototype for the chamber was structurally safe by satisfying the safety factor of 2 or more.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.13-19
• /
• 2018

This research is to optimize Single-Piece Side otr reinforcement using Hot-stamping and to strengthen weak regions on Single-Piece Side otr reinforcement. As a consequence, the weight and the number of parts were reduced and resulting in improvement of impact and stiffness performance when compared to multi-piece construction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.264-266
• /
• 2013

프리스트레싱으로 연결된 반강접 함체의 응답을 확인하기 위하여 일체형 함체를 기준으로한 실험을 수행하였다. 또한, 실험값과의 비교를 위하여 동-수역학 해석을 수행하였다. 그 결과, 실험에서 나온 피치 가속도는 상부 구조물의 유무와 상관없이 반강접 함체와 일체형 함체가 비슷하게 나타났으며, 해석값과는 1.2초의 주기를 제외하고 다른 주기에서는 비슷한 결과를 나타내었다.