• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.813-821
• /
• 1995

본 연구의 목적은 심리육체적 방법(Psychophysical method)을 이용하여 다양한 중량물운반 유형에서의 최대허용하중을 구하는 것이며 이의 타당성을 생리학적 방법(physiological method)을 이용하여 검토하는 것이다. 또한, 인체측정과 근력측정 자료를 이용하여 각 운반유형에서의 최대허용 하중을 예측하는 모형을 개발하고자 한다. 본 연구에서는 네 가지의 운반유형(Front carrying, One-hand side carrying, Two-hands side carrying 그리고 Back carrying)과 두가지의 보행 속도 (50.0 그리고 79.2 m/min)를 주요변수로 8가지의 작업에 대해 무작위로 선택하여 각 작업에 대한 최대허용 하중을 시간과 경비의 감소측면에서 폭넓게 사용되고 있는 심리육체적 방법으로 구하였다. 피실험자는 운반작업의 경력이 있는 실제 작업자군(n=7)과 그렇지 않은 학생군(n=10)으로 구분하여 건강한 남성 피실험자를 대상으로 연구를 실시하였다. 주실험전에 인체측정과 근력측정을 실시하였다. 이후에 심리육체적 방법과 생리학적 방법을 실시간(on-line)으로 실시하였다. 연구결과로 학생군과 작업자군간의 신체조건은 뚜렷한 차이를 보이지 않았으나 근력은 작업자가 우월하였다. 심리육체적 방법을 사용하여 도출된 최대허용 하중은 학생군, 작업자군 모두 운반유형의 변화에 따라 유의함을 보였다.(학생군:p=.0001 작업자군:p=.0001). 반면에 속도의 변화는 유의하지 않았다(학생군:p=.7954 작업자군:p=.9231). 또한 학생군과 작업자군 모두 Back carrying에서 가증 큰 하중을 운반하였다(학생군:8.16kg 작업자군:12.9kg). 심박수를 이용한 생리학적 연구에서는 평균 심박수가 거의 100 이하를 유지하므로써 피실험자들이 8시간 작업기준으로 보아 무리가 없는 최대허용 하중을 결정하였음을 보였다. 또한 각 운반작업에 대한 최대허용 하중을 예측하는 회귀모형을 제시하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2024

Pedestrian facilities encompass pedestrian roads, stairs, and queuing areas exclusively designed for pedestrian use. The Korean Highway Capacity Manual provides guidelines for analyzing the capacity and level of service of pedestrian facilities. However, there is a lack of analysis methods tailored specifically for pedestrian facilities. Therefore, in this study, we introduced a new standard of pedestrian space to account for changes in the Korean body ellipse. Furthermore, based on this newly defined pedestrian space, we proposed a new standard value for the level of service of queuing areas. The results of on-site surveys confirmed that the proposed level of service can effectively reflect the actual walking situation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.87-91
• /
• 2003

포항제철소는 제품의 선적 및 하역업무를 위래 13기의 하역기를 운영 중에 있다. 제품하역기의 운전실태는 1명의 작업자가 탑승하여 제품이 놓여질 선박 내 location을 관리한다. 특히, 중량물을 다루는 만큼 안전사고 방지를 위산 고도의 주의를 요하는 작업이다. 그러나 운전실의 위치가 지상 $13\~24m$에 위치해 있어, 하방 관측을 위해 장시간 머리를 구부려야 하므로 작업피로는 물론 요통 발생 가능성이 높다. 또한, 13기 하역기의 제작사 및 제작 시기에 차이가 있어, User Interfare가 각기 다르다. 주기적으로 하역기를 바꿔 탑승하는 작업자로서는 오조작 가능성이 있어 문제점으로 지적되고 있다. 근본적으로는 이동통로 폭의 협소함에 따른 진$\cdot$출입의 문제, 전장품의 부적절한 배치에 따른 작업자 충돌 문제 등, 기본적인 인간공학적 원칙이 반영되지 않은 운전실설계로 제품하역기 작업자의 업무부하가 가중되고 있는 실정이다. 본 연구에서는 인간공학적 설계원칙을 반영하여 제품하역기 운전실을 가상환경으로 제작해보고, 3차원 인제 모형을 실제로 탑승시켜 주요 설계 제약조건의 검증을 실시하였다. 3차원 가상환경 및 인체모형의 제작은 상용 3D Tool인 3ds Max 5와 Anthropos Ergomax라는 프로그램을 이용하였다. 이와같은 방법을 통해, 실제 공사 후에 발견될 문제점에 대한 사전 도출이 가능함은 물론, 보다 인간공학적인 운전실 설계가 이뤄질 수 있었다.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.193-198
• /
• 2015

This study analyzed the total number of 19,636 patients and radiation technologists, 11,433 of male and 8,203 of female by examined body parts, age, types of detectors, the using contrast enhancement and working condition of the technologists, regular staffs or rotation-duty staffs, based on the K-DOS program distributed by FDA with the DLP value of diagnostic evaluation. The result shows that the effective radiation dose was 0.7mSv~41.7mSv for each region and male patients had more radiation exposure than females. And the amount of exposure was also affected by the types and the method of detectors. Furthermore, the regular staffs took the role of helping the patient to get reduced amount of radiation exposure than rotation duty-staffs. Computed tomography (CT) use has increased dramatically over the past several decades. In this reason, to support the patients and the workers' health in the field, the hospitals should apply specialized regular working radiation technologist system and manufacturing companies of those CTs should develop low medical radiation exposure devices.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2010

The mask-face interface design should consider the face shape to improve the half mask respirator's fit ratio. This study tried to design the mask-face interface using recent Korean face data. By using the data of 1536 men's 3D face scanning (Size Korea data), head clay mock-up was made and mask-face interface line was extracted from this head mock-up. Using this interface line, the half-mask prototype was made. According to the quantitative fitting test, the proposed mask was found to be well fitted (average fit-ratio > 100). The proposed method had two advantages. 1) The method could use massive head-related anthropometric data like Size Korea data. 2) The qualitative fit test (observation) could be conducted very quickly by fitting the prototype to the head mock-up. However, this method also had several limitations. 1) The head clay mock-up could be different according to the mock-up maker. 2) The average values of the head-related anthropometric data were used to make the head mock-up. Small and large size head mock-ups should be made and tested.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.1-7
• /
• 2015

As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + $\epsilon$. This model can be used to estimate the percentage of body fat using only a tape measure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.71-77
• /
• 2007

In this study, reactions of central nervous systems working against different conditions of forced frequency and acceleration were measured and analyzed. The experiment are conducted with health men. The steady vibration conditions of forced frequency (0.315m/s2-1.0Hz, 0.315m/s2-10Hz and 10Hz-1.0m/s2) are used and the waves of EEG (Electroencephalogram) are measured. As a result, this paper shows that the ${\alpha}-wave$ of frontal lobe transfers from low to high frequency band under the vibration environment. Additionally, the average frequency of ${\alpha}-wave$ is higher under the vibration than under non-vibration environment. In the case of forced frequency of 1.0Hz-0.315m/s2, the feeling with the vibration are nearly same compared with the non-vibration condition. But in the case of 10Hz-1.0m/s2, uncomfortable feeling increased compared with the non-vibration condition. This study also shows the relationship between fluctuation slop and feeling. From this study, it is found that the effect of vibration on human depends on acceleration characteristics. Highly accelerating vibration is more harmful to human.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.1-7
• /
• 2006

This study determined the optimal positions of the movable steering wheel and pedal systems of industrial vehicle by various body dimensions. The position of objects and starting driving posture were measured by Martin-type anthropometer and goniometer. The X, Y and Z axis of movable steering wheel and pedal systems were measured horizon distance from right side to left side, horizon distance from front side to rear side and vertical distance from floor to ceiling. During the experiment in order to exclude learning effectiveness with forklift driving, 27 subjects who had male not experiences in driving a forklift used in the experiment. The relationship between the position of steering wheel and driver's posture with body dimensions was analyzed by using correlation relation and paired comparison t-test based on the measured data. The pedal location in X and Z axises was not related with various body dimensions. Also, the steering wheel was different among the angles of the right elbow and shoulder depending on the various body dimensions.

• Journal of Industrial Convergence
• /
• v.20 no.7
• /
• pp.123-129
• /
• 2022

It was to establish the usage possibility as cosmetic material by testing stimulation of Leuconostoc mesenteroides which were cultured from human scalp's dead skin cell by patching it to the skin in the form of solubilized essence. Cultured L. mesenteroides diluted to 1% concentration and essence which contains it were patched to 31 and 32 participants' back each for 24 hours and established the stimulus figures by the specialists in 30 minutes, 24 hours, and 48 hours after they were taken off. They are both revealed as non-stimuli due to the result of 0.011 and 0 points each and therefore they are safe when used as skin products. Considering the results of this test and the other previous studies which reported the L. mesenteroides as anti-allergic, antioxidant, and anti-inflammatory, L. mesenteroides is usable for cosmetics and worth further research.

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.559-592
• /
• 2012

In spite of the transitional changes in the shoe industry in Busan area, regular academic studies on the management plan to improve the practical competitiveness of footwear industry focused in the materials, bio-dynamics, components, and designs, etc. in the engineering viewpoint are very rare. Many reports of policies were published from late 190's to 2000's but they were limited to the identification of practical situations and the measures for strategic alternatives and were not developed to be the academic studies to improve the competitiveness in terms of management control. It is intended to seek for the measures to be reviewed as the alternatives to improve the self-competitiveness of footwear companies by approaching the problems limited to such specific area in the viewpoint of management control. The core of this study is to provide the alternative plans for expansion of the industrial foundation by seeking for the measures to improve competitiveness with application of knowledge management as an alternative for improvement of not transient but sustainable industrial competitiveness, in order to help the export of shoes from Busan area which has been rapidly increased since the Korea-USA FTA and Korea-EU FTA. In such viewpoint, in the study, a questionnaire survey was performed related with the issues of Busan's footwear industry and the plan to implement knowledge management was discussed for improvement of the competitiveness of footwear industry based on the result of such questionnaire survey. As most of studies and directions have been focused in functional shoes, designs, materials, and components, etc., which are related with the properties of human dynamics, as the alternatives for improvement of the footwear industry of Busan area and did not suggest the measures to make basic changes in the management of companies, the implementation of knowledge management was emphasized in order to seek for the direction of such plan. The purpose of this study is to suggest an alternative for construction of industrial eco-system for high added value by seeking for the probability of knowledge management for conversion of footwear industry into knowledge industry. In order to accomplish the effect of increased export as the result of FTA, current management method of footwear companies is limited and the effect of FTA should be maximized by improving the competitiveness with implementation of knowledge management methods. Settlement of such knowledge management will act as the momentum to improve the competitiveness of footwear companies and, in a long-term viewpoint, will be able to maximize the improvement of knowledge industry and creation of job opportunities.