• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.31-37
• /
• 2018

In the surface contamination test using the end-window Geiger-Muller type counter, the wrap is used as a method for protecting the detector exposed to the outside in order to measure the beta-rays. We analyze the effect of this method on the measurement rate and the correction factor, and wanted to make it clear to radiation workers that excessive use of the wrap can affect the measured value of the beta-rays. The experimental method was to compare and analyze the change of the beta-rays measurement counting rate and the calibration factor according to the wrap thickness using the beta-rays with different energy of 3 KBq, 1.5 KBq and 0.3 KBq. The subjects of this study were the end-window Geiger-Muller type counter which were held at the calibration center certified by Korea Laboratory Accreditation Scheme (KOLAS) in March 2012, Cl-36 (Chlorine) and Sr-90 (Strontium) were used as the source of beta radiation. The measurement counting rate decreased with increasing wrap thickness, and the calibration factor increased with increasing wrap thickness. Since the changes of the measurement counting rate and the calibration factors can reduce the accuracy of the instrument readings, but also have a significant impact on detector contamination and damage, so there is a need to find out what thickness of wrap is most effective. If we using a wraps with thickness that show a low rate of change of the measurement counting rate and the calibration factor, it will protect the detector and minimize the effect on the measured value of the beta-rays.

• Industry Promotion Research
• /
• v.4 no.2
• /
• pp.19-28
• /
• 2019

This study analyzed the effect of the improvement of the work environment of the worker on the performance of the individual. A total of 50 questionnaires were analyzed for SME workers. First, the correlation between the work environment of the worker and the work performance of the individual is -388, the correlation coefficient between the salary level and the contribution is .566, the salary level and the job satisfaction .586, The results of this study were as follows. First, it was confirmed that there was a significant relationship between the contribution and the peer relationship -.331, p <.05, and the job satisfaction and peer relationship .373, the working environment and working time were .442, And it was found to be significant at p>.01 level. Second, job performance had a significant effect on job performance (p <.05, ${\beta}=.340$) and peer relationship (p <.05, ${\beta}=.320$) (P <.001, ${\beta}=.465$) were found to have a significant effect on the level of achievement and contribution, but not statistically significant. Third, it was confirmed that there was no difference between the groups in terms of work performance. The results of this study are as follows. First, we analyzed the effect of improvement of work environment on individual work performance by analyzing the work environment and work performance perceived by SME workers.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.1
• /
• pp.85-100
• /
• 2008

This study attempted to analyze the contents of Practical Arts(Technology Home Economics)Textbooks written by the 7th national curriculum in a gender equity education. The objective of this study was to suggest some improvements which should be solved in terms of gender equity in Practical Arts, Technology and Home Economics education through analyzing their teaching and learning contents. Quantitative analysis were carried out for the objective of this study, Practical Arts(Technology Home Economics)Textbooks were divided into Technology and Home Economics fields. The pictures and illustration were analyzed in terms of sexual discrimination considering the social status and role. The analysis results were as follows. First, there were few cases of sexual discrimination in the texts. On the other hand, there were some cases of sexual discrimination in the pictures and illustration. Considering the results of some studies carried out in the 6th national curriculum, many problems raised in a gender equity education standpoint in the studies were solved. However, there were some cases of sexual discrimination which should be improved in the textbooks written by the 7th national curriculum. Second, there were few cases of sexual discrimination in Practical Arts textbooks. On the contrary many problems in terms of gender equity education were found in the textbooks of Technology and Home Economics. This result may be caused by the characteristics of Technology and Home Economics. The traditional viewpoint toward Technology and Home economics Textbook needs to be changed. In other words, their textbooks have to include practical contents for the positive sense of value and right sexual roles in terms of gender equity education. The contents of Practical Arts(Technology Home economics)Textbooks should be designed considering the articulation among the subjects and grades especially in terms of gender equity education.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.292-299
• /
• 2018

In a survey in which farmers were asked about their levels of satisfaction with agricultural machines, Japanese products scored higher than local products by 1.2, 1.3, and 1.4 times for tractors, combine harvesters, and rice transplanter, respectively. Japanese products corresponded to generally high satisfaction levels in terms of operating performance, operability, frequency of breakdowns, and durability, excluding sales price and after-sales services. Effective countermeasures through quality improvement are therefore necessary for Korean products. Furthermore, a survey of dealers showed that the components and consumables for core agricultural machines had high frequencies of breakdowns and repairs. Four major components of tractors represented 85.3% of all breakdowns and repairs, five components of combine harvesters represented 89.6%, and three components of rice transplanters represented 80.5%. Moreover, a comparison of the technological levels between local and imported machines showed that the local machines' levels were at 60-100% for tractors, 70-100% for combine harvesters, and 70-95% for rice transplanters. Small and mid-sized tractors, 4 interrow combine harvesters, and 6 interrow rice transplanters showed similar levels of technology. The results of the analysis suggest that action is urgently needed at a policy level to establish an agricultural machinery component research center for the development, production, and supply of commonly-used components, with the participation of manufacturers of agricultural machines and components, in order to enhance the competitiveness of local manufacturers and to revitalize the agricultural machine market.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.65-74
• /
• 2005

National groundwater monitoring stations have been managed throughout the country by Korea Water Resources Corporation (KOWACO) in order to monitor variations in quantity and quality of groundwater resources. A multi-sensor installed in each monitoring station well measures groundwater level, water temperature and electrical conductivity every six hours and the logged data are automatically transmitted to a host computer in KOWACO. Meanwhile despite regular station inspection and replacement of deteriorate or broken devices, abnormal values or outliers often occur due to intrinsic limitations of automatic monitoring and transmission. Thus prompt recognition and measures to these values are essentially required to reduce disturbance and missing period of the data. In this study, time and frequency of outlier occurrence were analyzed for the water level data obtained from national groundwater monitoring stations within the Han river basin in 2000. The analysis results indicated that the most prominent patterns of the outliers were rapid decline for water level, no variation for temperature and steep decline for electrical conductivity. This study provided a sample criterion for determining the outlier for each parameter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.185-191
• /
• 2018

This study examined the type and extent of interruption between induced emotion and succeeding arithmetic operation. The experiment was carried out to determine the influence of the induced emotions (anger, joy, and sorrow) and stimulus types (picture and sentence) on the cognitive process load that may block the interactions among the constituents of working memory. The study subjects were 32 undergraduates who were similar with respect to age and education parameters and were especially instructed to attend to induced emotion by imitation of facial expression and to make a correct decision during the remainder calculation task. In the results, the stimulus types did not exhibit any difference but there was a significant difference among the induced emotion types. The difference was observed in slower response time at positive emotion(joy condition) as compared with other emotions(anger and sorrow). More specifically, error and delayed correct response rate for emotion types were analysed to determine which phase the slower response was associated with. Delayed responses of the joy condition by sentence-inducing stimulus were identified with the error rate difference, and those by picture-inducing stimulus with the delayed correct response rate. These findings not only suggest that induced positive emotion increased response time compared to negative emotions, but also imply that picture-inducing stimulus easily affords arithmetic fluctuation whereas sentence-inducing stimulus results in arithmetic failure.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.139-155
• /
• 2015

Animation is completed in accordance with the original planning of visual direction in the process of post-production. Especially, a variety of visualization skills to meet the planning idea are directed in editing and compositing processes such as rendering and shading in the production of 3D animation. Therefore, the studies how to implement these visual effects have been conducted since the emergence of the animation. The rendering method which appears in the recent animations so often is the effect of 2D animation style although it is applied by 3D technique. 3D animation can be classified as two types including photo realistic and non-photo realistic renderings. The former is to render the images realistically while the latter is to highlight the formative effect with analogue style free from the realism of the photographs. Visual effect of 2D animation is non-realistic, that is, non-photo realistic rendering. The animations produced by this method have the depth of 3D animation expression in terms of space and animating, and can direct the viewer-friendly analogue style visuals, which are widely used as a post-production effect. Hence in this study, we selected a short animation, 'Paperman,' one of Disney's animations, produced by cartoon rendering method which belongs to the class of non-photo rendering technique in 3D graphics, as our subject. We analyzed their techniques and visual effects of the scenes expressed by cartoon rendering method so as to understand whether they meet the original direction idea with the composition work. In addition, we expect further developments of post-production methods, exceeding the limit of graphic expression in alignment with the trend that has become more various in the types and genres of non-photo rendering.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.322-331
• /
• 2013

The purpose of the present study was to develop a convergent education contents for dementia prevention, operating on the web network applying modern information technology(IT). At the preparation stage, local and worldwide literatures related to dementia were analyzed followed by surveying industry demands, based on which the program was designed and developed. In the following enhancement stage, the program was modified as much as possible by advices obtained from experts in various fields. Development results of the present program are summarized as follows. Firstly, 645 intellect development model to prevent dementia was established through peer review and verification of convergent education theories by expert groups. This model was named as "Garisani" meaning "cognition capable of judging objects" in the Korean language. Secondly, 'Find a way' and 'Connect a line' modules were developed in the numeric field as well as 'Identify a letter(I, II)' modules, in the language field for web-based left brain training program. Thirdly, 'Find my car' and 'Vision training' modules in the attention field and 'Object inference' and 'Compare pictures' modules in the cognition field were developed for web-based right brain training program. Fourth, 'Pentomino' and 'BQmaze'(Brain Quotient and maze) modules in the space perception field and 'Visual training' in the memory field were developed for web-based left and right brains training. Fifth, all results were integrated leading to a 52 week Garisani convergent education program for dementia prevention.

• Korean Journal of Organic Agriculture
• /
• v.27 no.4
• /
• pp.437-452
• /
• 2019

The HACCP evaluation standards for the meat packaging plant are divided into general scale HACCP evaluation standard and small scale HACCP evaluation standard. There are 69 evaluation items in the general scale HACCP evaluation criteria, of which 54 items in the prerequisite management and 15 items in the HACCP management are included. The number of small scale HACCP evaluation items are 20 and about 29% of the general scale HACCP evaluation items. This may not be enough to produce a safety livestock products for the purpose of implementing the HACCP system due to the nature of the meat packaging plant, which does not show much difference in the production process or method of product depending on the scale. To improve the small scale HACCP evaluation standard, the importance of each item was compared with the small scale HACCP evaluation based on the rate of non-compliance and the severity levels in the general scale HACCP evaluation items. As a result of the study, 8 items were derived from the prerequisites management, 2 items were derived from the HACCP management, and some similar evaluation items were grouped together. Finally, 10 items were added to the 20 items of the existing small scale HACCP evaluation items. In this study, study on the safety management of domestic livestock products are continuously carried out, so that it is possible to provide safety livestock products to consumers and contributes to securing competitiveness of domestic livestock industry.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.161-172
• /
• 2023

Safety education delivered to construction workers in a lecture manner has limitations in concentration and immersion, so delivery power and interest are low. In order to improve unstable behavior through education and prevent safety accidents, it is necessary to change the paradigm to hands-on education. Purpose: Experiential safety education aims to contribute to preventing accidents for construction workers by quickly recognizing risks, improving emergency response skills, and verifying the effectiveness of pre- and post-learning. Method: Based on a survey of workers who experienced the same work environment as the actual construction site, an opinion survey on the pre- and post-safety experience education and a variable measurement tool were planned, and a research hypothesis was established. Results: The Bayesian theory and MC simulation analysis were used to analyze the structural equation model, and the change in construction worker behavior was confirmed through the intended safety (A), non-experiential education in the sub-area of anxiety (B), average, standard deviation, and minimum and maximum values. Conclusion: The effect of education and industrial accidents are reduced only when construction workers are motivated to participate.