• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.62-63
• /
• 2003

대기 중 입자상 및 가스상 오염물질에 대한 오염원의 영향을 확인하고 기여도를 정량화하기 위하여 수용방법론 (receptor methods)이 이용되고 있다. 수용방법론은 각종 응용통계학을 기반으로 한 계량화 학적 분석기술로서, 일반대기 중 수용체에서 가스상ㆍ입자상 오염물질의 물리ㆍ화학적 특성을 분석한 후, 대기질에 영향을 미치는 오염원을 확인하고 기여도를 정량적으로 파악하여 대기오염 관리를 합리적으로 수행할 수 있는 통계적 방법이다. 또한 수용방법론은 입자상 및 가스상 오염물질의 분석에 다각도로 응용할 수 있으며, 합리적인 대기오염 관리를 유도하는 기초기술이라 할 수 있다(황인조 등, 2001). (중략)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.95-96
• /
• 2012

This study makes with the environment-friendly artificial stone which doesn't use the cement and natural aggregate and increases the blast furnace slag that is the eco-friendly material that is the industrial byproduct, fly ash, and availability of the red mud and applies the coares aggregate substitute material as the cleistothecium. The experimental plan according to it indicated the compressive strength and flexural strength which is the most excellent in the mixied ratio 40% of the result degree of closeness magnetism of experimenting with the optimal mix obtained through the preceding stude.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.293-299
• /
• 2001

이중층 탄소재료가 콜타르핏치와 메조페이스 핏치, 인조흑연, 천연흑연과 코크스를 사용하여 제조되었다. 콜타르 핏치는 톨루엔이나 경유와 같은 유기용매에 용해되어 코팅재로 사용되었다. 메조페이스 핏치, 인조흑연, 천연흑연 및 코크에 대한 콜타르 핏치의 코팅은 X선 회절분석과 CHN 분석을 통해 확인하였다. 코팅된 탄소재료를 질소분위기의 800-100$0^{\circ}C$에서 열처리한 후 리튬이온 전지의 음극으로 사용하기 위하여 2$600^{\circ}C$에서 열처리하였다. 이중층 탄소재료의 성능평가는 동전형태의 반쪽전지를 통해 수행되었는데, 평가는 음극으로서의 충전과 방전을 통해 수행되었다. 이런 충.방전 능력은 탄소재료의 열처리 온도의 변화나 전구체의 종류에 따라 달리 나타났지만 코팅방법의 차이에 의해서는 큰 차이가 없었다. 열처리를 80$0^{\circ}C$에서 한 경우가 100$0^{\circ}C$에서 한 경우보다 높은 충.방전 능력을 나타내었고, 2$600^{\circ}C$에서 흑연화된 것보다 탄화된 재료들이 높은 충.방전 능력을 나타내었다. 결론적으로, 음극재료의 성능은 결정화도, 조성 및 탄소재료의 미세구조에 따라 달라짐을 알 수 있었다.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.529-537
• /
• 2003

This study was conducted to manufacture the soluble micro-fiber and to synthesize low melting polymer for the interior fabric not to use the polyurethane resin causing some problems. Low melting polyester for weft yarn was introduced by adding 30-40 mol% ratio of isophthalic acid to a main chain of polyethylene terephthalate to decrease the melting temperature up to heat setting temperature. Micro-fiber for warp yarn consisted of both soluble and insoluble components with multi-layered structure. When the soluble micro-fiber was treated by alkaline hydrolysis with 3-5% concentration of NaOH, it showed the turning point at 28% weight loss since soluble polyester was hydrolyzed approximate five times faster than regular polyester.

• Journal of computational fluids engineering
• /
• v.16 no.4
• /
• pp.84-91
• /
• 2011

Hemodialysis is essential for patients with end stage renal failure. It is important to improve the patency rate and to minimize occurrence of the stenosis. Also, the blood flow to the artificial kidney can affect the blood flow characteristics through arteriovenous graft. Thus, the delivered dose are important factors for analyzing hemodynamic characteristics during hemodialysis access. In this study, the numerical analysis was performed for the effect of the delivered dose during hemodialysis access on the blood flow through the graft. As a result, The adverse pressure gradient occurred in case of a larger delivered dose through a catheter than standard dose and the flow instability increased. Also the circulation flow appeared largely at anastomotic site of the vein when the delivered dose was exceeded about half blood flow of inlet blood flow.

• Journal of computational fluids engineering
• /
• v.18 no.3
• /
• pp.14-19
• /
• 2013

Renal failure patients have to operate arteriovenous graft for hemodialysis. Blood flow characteristics influence the patency rate of arteriovenous graft. Numerical investigation is performed with the arteriovenous graft according to injection of blood. As a result, when the injection is not applied to venous graft, the low wall shear stress region appears at venous anastomosis. It may cause intimal hyperplasia at venous anastomosis.

• Journal of Chest Surgery
• /
• v.34 no.8
• /
• pp.648-650
• /
• 2001

Bleeding from anastomotic site in operation for aorta has been troublesome, because it has influence on postoperative morbidity and mortality. Therefore, hemostasis is very important. We describe a simple and effective method for achieving hemostasis of the anastomotic site in aortic surgery. By wrapping around anastomotic site with remnant artificial vascular graft, we have acquired good results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.171-172
• /
• 2015

Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, the waste porcelain is applied to the artificial stone and the durability property of the artificial stone according to it tries to be investigated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.51-52
• /
• 2014

Recently, it is the global warming phenomenon because of the greenhouse gas exhaustion caused by and the environment problem is serious. And it is the situation where the problem of the exhaustion of resource because of the indiscriminate picking of the that is the raw material of the cement, limestone and natural aggregate are emphasized. In addition, thus the cement reduction amount of use and substitute material research is the urgent actual condition with the gas emission, which here it is generated in conducting compression molding in the building stone manufacturing process performance degradation phenomenon and fire resistance, and problem of the durability. Therefore, in this research, because of being the magnesia phosphate ceramics, the waste porcelain is applied and the anti-wearing character of the artificial stone according to it tries to be investigated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.2
• /
• pp.277-285
• /
• 2000

The purpose of this study was to quantify the relationship between the sense of touch and mechanical properties of man-made leather. The first was to develop the five conversion equations which convert mechanical properties of man-made leather into five factor scores, which express five factors of the sense of touch(surface property, stretchiness, thickness & weight, thermal property(warmth & coolness), and moisture property(sticky & clingy)). The second was to develop the conversion equation which converts five factor scores into score of the sense of touch. Five factor scores were predicted by the following mechanical properties; surface property factor by log2HB and (log2HB)2, stretchiness factor by logEM, thickness & weight factor by logT, log2HB, logW, thermal property factor by logT, logHB, logSMd, and moisture property factor by logMMD, RC, RC2, (logEM)2, RT2. Subsequently, these five factor scores were converted into score of the sense of touch. The predictive abilities of the developed equations were satisfied.