• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.571-575
• /
• 2004

인쇄회로기판(PCB)을 조립 또는 검사하는 장비의 작업 프로그램 작성을 위해서는, 납땜 패드의 위치와 크기에 대한 데이터가 필요하다. CAD 파일, 거버 파일 등을 사용하여 패드를 추출하는 방법이 많이 사용되고 있으나, 본 논문은 이미지 스캐너를 사용하여 추출하는 방법을 새로이 제안한다. 제안된 방법은 통계적 영상 처리를 적용하여, 기존의 일반적인 영상처리 방식보다 기판 별 패드 색상의 차이에 강인하다. 실제 PCB 에 대한 실험을 통하여 제안 방법의 성능을 검증한다. 제시된 방법은, CAD 파일과 거버 파일의 확보가 어려운 임가공 업체 등의 생산현장에서 사용될 수 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.15-22
• /
• 1999

Generally, many equipments and a long lead time ale required to manufacture the build-up multilayer board through various processes such as etching, plating, drilling etc. Wet process is suitable for mass production, however it is not adequate for manufacturing prototype in developing stage. In this study, a silk screen printing technology is introduced to make a prototype build-up multilayer board. As for the material photo/thermal curable resin and conductive paste are used for forming dielectric and conductor. And conductive paste fills vias for interconnecting each layer, and also is used for circuit patterning by silk screen technology. Finally, the basic concept and the possibility of build-up multilayer board prototype is proposed and verified as a powerful approach, compared with the conventional processes.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.249-257
• /
• 1998

다층 인쇄회로기판에서 고속 신호를 정확하고 신속하게 배선 설계하려면, 물리적 설계 규칙과 신호 잡음을 고려한 전기적 설계 규칙을 정립하고, 적용할 신호 검증 도구를 사용하여 신호의 충실성을 검증하여야 한다. 본 논문은 현재 개발 제작되어 동작 중에 있는 HIPSS(High Performance Storage System)보드에 대한 전기적 설계 규칙과 고속 신호의 배선에 따른 일부 고속 신호의 신호 검증 방법을 설명한다. 또한 전기적 설계 규칙을 적용하여 인쇄회로기판을 설계하는 경우, 발생하는 신호 지연, 반사 그리고 누화 등의 신호 잡음을 검증 도구를 이용하여 시뮬레이션 하고, 분석한 결과를 보이며, 수정된 고속 신호의 배선 설계를 확인한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.203-203
• /
• 2011

최근 전자, 정보통신기기의 고기능, 고속화, 소형화, 경량화 요구에 따라 반도체 소자인 LSI와 함께 인쇄회로기판도 해가 갈수록 고밀도, 고다층화, 얇고 균일한 도금과 함께 밀착성향상 추세로 급속하게 진행되고 있다. 인쇄회로기판에서 표면처리는 매우 광범위하고 많은 문제점이 있지만 고주파노이즈감소를 위하여 도금두께 균일화 평활면의 접착, 파인패턴 형성과 절연성이 가장 중요하다.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.55-63
• /
• 2018

Physical property changes of printed circuit board (PCB) according to heat treatment conditions were investigated. The heat treatment was carried out in air and nitrogen atmosphere at temperature range from $200^{\circ}C$ to $325^{\circ}C$. Thermogravimetric analysis showed that the PCB was pyrolyzed in two steps. The thickness of PCB expanded by 11~28% at about $300^{\circ}C$ in both air and nitrogen atmosphere as layer disintegration occurred. Mechanical strength of PCB decreased from 338.4 MPa to 20.3~40.2 MPa due to the delamination caused by the heat treatment. The heated printed circuit boards were crushed and sieved for analysis of density distribution and liberation degree of copper according to particle size. As a result of the density distribution measurement, non metallic particles and copper particles were concentrated into different size range, respectively. The liberation degree of copper was improved from 9.3% to 100% at size range of $1,400{\sim}2,000{\mu}m$ by heat treatment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.67-72
• /
• 2011

8-layer printed circuit board is designed and implemented for triple band(2.3/2.5/3.5GHz) m-WiMAX system. In order to maintain excellent RF performance, low dielectric constant material is used for implementation of the printed circuit board. Also, embedded printed circuit board which embed passive devices is manufactured to reduce total system area. As a result, total system area is cut off by 9%. Triple band m-WiMAX system is produced using embedded printed circuit board. Furthermore, internet connecting test is performed and proved successful running of the system. The developed embedded printed circuit board will provide a effective solution for system area reduction and low loss signal RF communication system.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2010

Recently, we have investigated the recovery of resources from the waste material of manufacturing printed circuit board. As printed circuit board or chip has become light, small, high reliability, it is necessary to reuse and recover resources from them. Especially, the printed circuit board that has been used for important mobile electronic pans are plated with min.0.03 ${\mu}m$ to max.50 ${\mu}m$. As increasing the cost of gold, raw material, chemicals, payments and waste material, it has been accelerated the competition for reuse and recovery. But, it is insufficiency of technician and equipments for the recovery of effective resource. In this paper, as analyzing the technical trend of gold recovery and waste back board from the manufacturing process of printed circuit board, it may be effective of recycling, further more it may be contributed to develop the valuable resources.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.61-70
• /
• 2008

This paper presents the flexible MEMS transmitter based on flexible printed circuit board or FPCB, which can be transformed to arbitrary shape. The FPCB is suitable to fabricate light weight and small size modules with the help of its thin thickness. Moreover a module based on FPCB can be attached on the arbitrary curved surface due to its flexible enough to be lolled up like paper. In this paper, the flexible MEMS transmitter integrated on FPCB for a short-distance sensor network which is based on orthogonal frequency division multiplexing(OFDM) communication system is proposed. The active device of the proposed flexible MEMS transmitter is fabricated on InGaP/GaAs HBT process which has been used for power amplifier design to take advantages of high linear and high efficient characteristics. Moreover, the passive devices such as the filter and signal lines are integrated and fabricated on the FPCB board. The performance of the fabricated flexible MEMS transmitter is analyzed with EVM characteristics of the output signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1040-1047
• /
• 2002

In this paper, we investigated noise decoupling on the power bus by the screw connection, used to the mechanical join and grounding of the PCB ground to chassis. The screw connection penetrates the power bus and then it affects noise propagation on the power bus. To verify effect of the screw connection, we compare bare board with board having screws connection with 0.5 mm separation between power bus and chassis. From these results, we observed that the power bus noise was decreased about 5 dB at the frequency range from 0.1 GHz to 1 GHz. Also, we verified that a 4-layer PCB with signal trace had the better signal quality up to 600 MHz by the screw connection. Therefore, these results will be useful in designing to the high speed circuit and chassis.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.103.1-103.1
• /
• 2018

기존의 연성인쇄회로기판(FPCB)은 top down방식에 의한 에칭기술이 일반화되어 있으나, 고가의 장비를 사용한 제조방식과 복잡한 공정으로 인하여 품질수준은 높은 편이나 제조단가가 매우 비싼 편이다. 기존의 값비싼 top down방식을 대체하여 저렴한 가격으로 FPCB를 대체하려는 기술들이 지속적으로 연구되고 있다. 그중에서 가장 기술개발이 활발한 분야가 인쇄(잉크젯 혹은 레이저)방식이지만 아직 인쇄노즐의 크기와 잉크의 전도도에 한계가 있어 사용에 많은 제약이 있다. 그러나 금속미세회로(MMP)기술은 도금방식에 의한 bottom up기술로 회로의 정밀도와 전도도가 높으면서 연속제조방식에 의한 대량생산이 가능하므로 저렴하게 생산할 수 있어, 기존의 FPCB제조공정을 대체할 기술로 각광받고 있다.