• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.856-862
• /
• 2005

A flux-lock type SFCL consists of two coils, which are wound in parallel each other through an iron core, and a HTSC thin film connected in series with coil 2. If the current of the HTSC thin film exceeds its critical current by the fault accident, the resistance generated of the HTSC thin film, and thereby the fault current can be limited by the impedance of the flux-lock type SFCL. The amplitude of fault current can be set by the impedance of the flux-lock type SFCL. In this paper, we investigated the variance of the limiting current due to the ratio of inductances between coil 1 and coil 2 in the flux-lock type SFCL through the computer simulations and short circuit tests. In addition, both the simulation results and experimental ones were compared each other. From the comparison of both the results, the simulation results agreed well with the experimental ones.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2004

To construct the non-contact temperature detection systems, LC resonance type sensors composed of temperature sensitive ferrite inductors and capacitors were used, and their wireless temperature detection performances were investigated. The temperature was wirelessly detectable using the fabricated LC resonance sensors with a transmitter and receiver, because their inductances and resonance frequencies were changed according to the temperature dependance of permeability of the ferrites. The sensitivity of the system was decreased with the distance i between transmitter and receiver as a ratio of the l$^6$.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.181-184
• /
• 2002

본 논문에서는 600Hz 무선 LAN 시스템에 탑재를 위한 600㎓ 대역 전력증폭기 모듈을 개발 하였다. 600㎓ 대역 전력증폭기 모듈에 실장된 600㎓ 대역 전력증폭기 MMIC는 ETRI에서 설계 및 제작한 것으로 칩의 크기는 2.80 × 1.75㎟이며, on-wafer측정을 하여 얻은 결과는 동작 주파수 58~620Hz에서 소신호 이득은 12.4dB이고, 최대 소신호 이득은 59~60G보z에서 ISdB이며, 출력전력(Pldn)은 16.3~16.7dBm을 얻었다. 이와 같은 특성을 갖는 전력증폭기 MMIC를 사용하여 모듈을 제작하였으며, RF feed line을 위해 Rogers 사의 R03003 기판을 사용하였다. 모듈의 입출력은 동작 주파수 대역에 적합한 WRl5라는 waveguide 형태를 사용하였고, DC 바이어스 공급을 위해 3.5㎜ K-connector를 사용하였다 제작한 모듈의 크기는 40 × 30 × 15㎣이며, 최적의 성능을 얻고자 tuning bar를 상하로 이동하여 최적점을 찾았으며 나사로 고정하여 상태를 유지하도록 하였다. DC 바이어스 및 RF feed line과 칩의 연결은 본딩에 의한 인덕턴스를 최소화하기 위하여 3mil 두께의 리본 본딩을 하였다 전력증폭기 모듈을 측정한 결과, 동작주파수 600㎓ 대에서 소신호 이득은 6dB 이상, 입력 정합은 -lOdB 이하, 출력 정합은 -4dB 이하로 측정되었긴, 출력전력은 SdBm 이상으로 측정되었다. 동국대에서 제작한 600Hz 무선 LAN 시스템에 전력증폭기 모듈을 시스템 송신부에 탑재 시험한 결과, 동영상을 실시간으로 전송하는데 성공하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.45-52
• /
• 2006

In his paper, we have developed the SMD(surface mounted device) type PECL(positive emitter-coupled logic) VCXO of the $5{\times}7mm$ size for gratifying the requested specifications and the multilayer ceramic SMD(surface mounted device) package technology. The VCXO wired with the PECL(positive emitter coupled logic) package take place a stray inductance and a parasitic capacitance by the length and the inner pattern of the VCXO and the amplitude attenuation and signal loss due to the reflection of power source and the noise component. We have developed the Zig system to analyze the precise spectrum and evaluate the performance. The basic operating voltage is the 3.3 V and have the frequency range of 120MHz-180MHz. The Q factor is over 5K and it has the low jitter characteristics of 3.5 ps and low phase noise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.573-576
• /
• 2012

We have analyzed the induction effects by separation distance between the power feeding station and the telecommunication cables. To do this we measured the induced voltage in 11 sections(10km) between Jangseong and Imgok at Jeon-nam province using telecommunication cable installed nearby KTX's feeder line. Sub-section has about 1km length of telecommunication cable. And we used normalization method in installed length of telecommunication cables and mutual inductance to analysis the induction effects more rationally.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.105-114
• /
• 2000

To chive a traveling wave type ultrasonic motor with the series""-resonant inverter, the external inductor is i lnserted between the motor and inverter. In $\psi$is paper, we proposed a novel 3Ilalysis method to design the 3 ~xternal inductor. An equivalent model of the ultrasonic motor is expressed, and a selection method of the , ;;eries inductor is proposed from the basis of the model. When the series inductor has an optimal value, it is v velified by computer simulation results that power is efficiently transmitted to the mechanical resonant c component in the motor. The frequency and speed characteristics of the ultrasonic motor are investigated by e experiments for several external inductors. The validity of the proposed method for selecting external inductor i is clarified.clarified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.115-122
• /
• 2000

In design of a digital current controller for a 3cP PWM converter, its conventional model is used in obtaining i its discretized version. But, it has errors since the characteristics of SVPWM and time delay are not taken i into consideration. In this paper, the new reference frame model of a 3c~ PWJVI converter is proposed C considering these problems. Also, the direct digital current controller based on this model is designed without a any extra algolithm. A simple tuning algorithm for the proposed current controller is given to compensate the i inductaηce mismatch problem. Then simulation and experimental results show the validity of the algolithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.65-72
• /
• 2004

This paper proposes the novel boost input type resonant AC/DC converter. Since the proposed converter is single stage topology, it controls both of the input power factor and the output voltage at the same time, and resultingly obtains the high power factor of 99% with average current mode pulse width modulation. Especially, to accomplish the zero voltage switching, the resonance between the leakage inductance and external capacitor is used. For the theoretical consideration of the proposed converter, the six operation modes divided by means of current path are discussed, and the resonance characteristics in steady state are analyzed. To verify the validity of the proposed converter, a 200[W]($120[V_AC],\; 출력\; 48[V_DC],\; 4[A]$prototype converter was built and its experimental results were presented in this paper.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1521-1523
• /
• 2002

본 논문에서는 1.58 ${\times}$ 0.82 ${\times}$ 0.94 $mm^3$크기의 H 형태의 솔레노이드형 RF 칩 인덕터를 코일의 직경과 권선수를 변화시키면서 제작하였고, 그들의 고주파 성능을 비교 분석하였다. 저손실 $Al_2O_3$재료를 코아로 $30{\mu}m{\sim}40{\mu}m$의 여러 직경을 가진 Cu를 코일로 사용하였다. 인덕터의 인덕턴스(L), 품질계수(Q), 저항(R), 임피던스(Z) 그리고 커패시턴스(C) 등의 주파수 특성은 HP4291B로 측정하였다. 실험결과 동일권선수에 대해 코일직경이 자을수록 L, Q, R, 그리고 Z등이 증가하였고, 그 증가폭은 권선수가 클수록 커지는 경향이 있음을 알 수 있었다. 그러나 코일직경이 작을수록 기생 커패시턴스 효과가 빨리 나타나 자기 공진주파수 효과가 감소하는 경향을 보이고 있음을 확인하였다. 코일직경이 $3{\mu}m$이고 권선수가 6인 경우에 대표적인 값들은 다음과 같다. L=31.4nH(at 250MHz), Q=49.6(at 700MHz), R=0.362${\Omega}$(at 1MHz)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.157-158
• /
• 2005

Superconducting fault currents(SFCLs) are expected to improve not only reliability but also stability of real power systems. The analysis on the single line-to-ground fault of the integrated three phase flux-lock type SFCL, which consists of three flux-lock reactor wound on an iron core in each single phase and three YBCO thin films, was investigated in current limiting operation characteristics. We compared 21turn numbers with 42turn numbers according to wound turn numbers each the coil 2 under the additive polarity winding operation between coil 1 and coil 2. The three phase flux-lock type SFCL using an iron core differently operates general three phase resistive SFCLs. When a single line-to-ground fault occurred, the SFCL's three units were quenched after fault onset. We confirmed effective current limiting operation characteristics with adjustable inductance level.