• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.272-280
• /
• 2022

An aircraft carrier is a combat ship that acts as an aircraft base at sea and performs combat through aircraft mounted as a military ship operating the aircraft. The Navy proposed a 40,000-ton light aircraft carrier operation plan that could be equipped with vertical takeoff and landing fighter jets and helicopters around 2033, and based on this, this study examined the operation of aircraft control equipment among the aviation support systems required for operating light aircraft carriers in Korea. PriFly, TWR's ILARTS, ILM for airspace control, ASR, PAR, LAAS or RNAV, PALS (JPALS) for access control are required as essential equipment, and communication network and SCATT-16 are required along with URN-25 TACAN, ICLS (El/Az), ACLS OLS, MOVAS, IFLOLS, etc. This study consists of two parts, and part 2 will describe a specific control method on an aircraft carrier.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.35-44
• /
• 2022

The study on the wake vortex behavior during the aircraft's take-off and landing flight phase is critical to the flight safety of the aircraft, following close behind and the economy of the airport. The study on the wake vortex behavior should include the understanding of the ground effect on the behavior of the multiple wake vortices, generated from aircraft during the take-off and landing flight phase. In thia study, numerical schemes that can consider the ground effect were devised, by applying a vorticity boundary condition and an image method into the existing two-dimensional Fourier-spectral method. The present method was validated by comparing the present results, with the computed and measured data in the published literature. It was shown that the present method can predict the generation and behavior of the secondary vortex near the ground with reasonable accuracy. In future, the effect of the atmospheric conditions such as the stratification and the wind shear on the behavior of the vortex pair will be studied.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.655-662
• /
• 2022

Recently, with the increase in the use of UAV(unmanned aerial vehicles), research on horizontal maintenance stations that can take off and land in various environments has been actively conducted. These stations can safely land UAV through multiple DOF(degrees of freedom) or at least 2-DOF-based actuator actuation. Among them, many researchers are dealing with the multi-DOF stewart platform due to its high safety. However, the stewart platform requires high-precision control technology because it requires a lot of torque to actuate according to the load action. Therefore, in this paper, to solve the mentioned problem, a bevel gear-based 2-DOF horizontal maintenance station system is proposed. The proposed system is configured to prevent damage due to air resistance when maintaining ships and to install it in a small space. Also, in terms of system configuration, the bevel gear-based horizontal maintenance system has the main advantage of being able to take off and land UAVs of various sizes through the replacement of station pads. The driving of the system consists of a simple form that can control the motor by adjusting the rotation speed of the motor according to the sea waveform.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.77-95
• /
• 2023

In this study, the conceptual design of a tilt + stopped rotor type electric vertical take-off and landing (eVTOL) aircraft was performed using design iteration. Based on Hyundai Motor's S-A1, the mission profile was defined using the concept of urban air mobility (UAM), and configuration design and aerodynamic analysis were performed using OpenVSP and XFLR5 software. After estimating the required power for the designed eVTOL, the required performance of the battery and the maximum take-off weight (MTOW) were calculated. . It was iteratively calculated using Microsoft Excel and Visual Basic Application, and a new electric motor weight estimation formula was derived. Also, the sensitivity analyses of each design variables of an eVTOL was performed using the automated program.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.269-273
• /
• 2023

Based on the K-UAM roadmap, this study was conducted to select major education and training subjects necessary for the composition of the initial UAM pilot education and training curriculum. Currently, UAM aircraft have similar characteristics to rotorcraft that can take off and land vertically around VTOL functions. Therefore, in this study, the Rotary Wing Pilot Training Curriculum of the Army Aviation School, which represents Rotary Wing Flight Education, was selected as a comparative group, and education and training subjects for initial UAM pilot training were selected. First, a hierarchical structure for the AHP survey was designed based on the Army's rotorcraft pilot education and training subjects, and the AHP survey was conducted by selecting experts from each class. If the education and training subjects given as priorities through AHP analysis are applied to initial UAM pilot training, it is expected to contribute to the effect of education and training and ultimately to the safe operation of UAM.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.287-292
• /
• 2023

In the case of fixed CCTV, there is a problem in that a shadow area occurs, even if the visible range is maximized by utilizing the pan-tilt and zoom functions. The representative solution for that problem is that a plurality of fixed CCTVs are used. This requires a large amount of additional equipment (e.g., wires, facilities, monitors, etc.) proportional to the number of the CCTVs. Another solution is to use drones that are equipped with cameras and fly. However, Drone's operation time is much short. In order to extend the time, we can use multiple drones and can fly one by one. In this case, drones that need to recharge their batteries re-enter into a ready state at the drone port for next operation. In this paper, we propose a system for precised positioning and stable landing on the drone port by utilizing a small drone equipped with a fixed forward-facing monocular camera. For our conclusion, we implement our proposed system, operate, and finally verify our feasibility.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.380-392
• /
• 2022

In this paper, the new vertiport regulations of the FAA and EASA are analyzed for urban air mobility(UAM), and the major components of the vertipad and the new specifications of each component are analyzed, and UAM operation in various environments is analyzed. Additional components for vertiport and regulations for surrounding airspace were also reviewed. Afterwards, based on the size of the S-A1 aircraft being developed by Hyundai Motors, domestic vertiport specifications and layouts were investigated for UAM operation, and these were applied to the city of Incheon. In addition, the time required for using a taxi or car were compared with the time required for using UAM between major locations in Incheon and Seoul.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.941-946
• /
• 2023

To improve the lift, cruise speed, and range of eVTOL aircraft, which are being considered as future transportation vehicles, this paper introduces the concepts of Tilt Rotor and Tandem Wing to the aircraft. We developed an aircraft and conducted flight experiments to obtain flight videos and flight logs. The results of the analysis of the flight videos and flight logs showed that the aircraft's moment was excessively forward and the attitude was not recovered. To address this problem, we modified the wing incidence angles and surface areas in XFLR5 to obtain the optimal pitching moment coefficients to ensure vertical stability. We then analyzed the redesigned aircraft, developed using CATIA, through XFLR5. The results of this study provide valuable insights, suggesting that the incorporation of Tilt Rotor and Tandem Wing designs can contribute to achieving stable pitching moment coefficients. This innovative approach offers a promising avenue to significantly enhance vertical stability in UAM vehicles, paving the way for future advancements in the field.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.201-209
• /
• 2024

This study investigates the operational facets of low-density urban air mobility (UAM) from an airline's perspective amid burgeoning concerns about urban congestion in megacities. UAM, employing electric vertical takeoff and landing (eVTOL) technology, emerges as a potential remedy to the challenges of traffic gridlock and environmental degradation. As the UAM market progresses from initial stages to maturity, tailored traffic control systems become paramount. Focused on the context of low-density environments during UAM's inception, this research scrutinizes operational frameworks, essential infrastructure, and likely scenarios. It aims to bolster the safety and efficiency of UAM operations by delving into the specifics of traffic control concepts designed for these unique settings. The study seeks to significantly contribute to optimizing UAM's initial phases, providing insights into crucial operational dynamics for a smoother integration of urban air mobility into contemporary urban landscapes.