• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.04a
• /
• pp.317-320
• /
• 2000

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.37-45
• /
• 2002

A two-dimensional unsteady, inviscid flow solver has been developed for the simulation of airfoil-vortex interactions on unstructured dynamically adapted meshes. The Euler solver is based on a second-order accurate implicit time integration using a point Gauss-Seidel relaxation scheme and a dual time-step subiteration. A vertex-centered, finite-volume discretization is used in conjunction with the Roe's flux-difference splitting. An unsteady solution-adaptive dynamic mesh scheme is used by adding and deleting mesh points to take account of both spatial and temporal variations of the flow field. The effect of vortex interaction on the aeroelastic displacement of an airfoil attached to the idealized two degree-of-freedom spring system is investigated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.276-280
• /
• 2007

In this paper, heat transfer changes due to the shock/boundary layer interaction were investigated on surfaces where protruding bodies such as a cylinder and a secondary jet are mounted. With an infra-red thermography, surface temperature was measured and the measured data was used to obtain the convective heat transfer. Heat transfer phenomena around these two solid and fluid bodies were appeared to be very comparable each other. The inclination of a cylinder and the jet injection ratio were the important factors for the change of heat transfer on the effective surfaces.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.52-57
• /
• 1997

Dynamic characteristics of compressible flow fields in super-circled constricted tube have been studied numerically. By applying MacCormack's explicit scheme, time marching method with predictor/corrector step, Euler equation is solved to find characteristics of fluid flow in a constricted tube where a two-dimensional inviscid compressible flow is assumed. The effects of tube diameter and aspect ratios on the pressure variations are discussed extensively. The results of the developed numerical schemes are compared with those of commercial FLUENT code, and show a good agreement.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.431-436
• /
• 2013

본 연구에서는 정사각형으로 모델링 된 실린더 주위에 균일한 유동이 흐를 때, 나타나는 이차원 층류 유동을 분석하였다. EDISON_CFD를 이용하여 각도의 변화에 따른 사각 실린더의 박리점에 의한 주위 유동 현상을 해석하였다. 격자 분해능과 시간 간격에 따른 정확성을 분석하였다. 각도의 변화에 따른 정사각 실린더의 양력계수와 항력계수를 확인하였다. 또한 한 주기의 자료값을 평균한 유동에서 박리점의 위치 변화와 주 와흘림의 길이를 분석하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.424-431
• /
• 2007

This thesis proposed H-Bridge Multi-Level Inverter for Fluidized Bed Combustion Boiler Secondary Air Fan in 200MW thermal power plant. The adjustable speed drive systems improve the efficiency in lightly load condition and extend the life span of motor by limiting the over current at starting. H-Bridge Multi-level Inverter is composed of the several series low voltage power cell inverters, which have the independent isolated do link, in each phase. KEPRI(Korea Electric Power Research Institute) has successfully completed to develop, install, and commission H-Bridge Multi-level Inverter(6.6kV, 1MVA). This thesis gives a full detail about H-Bridge Multi-level Inverter, proposed boiler DCS(Distributed Control System) logic, and commissioning test result.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.655-663
• /
• 2013

Several studies of film cooling were accomplished with a secondary flow channel parallel to the main flow. In real turbine blades, however, the direction of the secondary flow channel is generally normal to the main flow. Thus, this study performs a numerical analysis to investigate the effects of the direction of secondary flow on the effectiveness of double-jet film cooling. The blowing ratio is 1 and 2, and the lateral injection angle is $22.5^{\circ}$. The parallel channel case creates a well-developed anti-kidney vortex with a blowing ratio of 1, and the laterally averaged film cooling effectiveness of the parallel channel is enhanced compared to the normal channel. The normal channel shows higher performance with a blowing ratio of 2. Both cases show high film cooling effectiveness. These phenomena can be attributed to a high blowing ratio and flow rate rather than an anti-kidney vortex.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.1-8
• /
• 2005

This paper explored the effects of separation control through the use of pulsating jet blowing on a two dimensional elliptical airfoil. To develop an active control technique of flow separation, a flow control actuator utilizing continuous/pulsed jet of pressurized air was designed and installed in a wind tunnel testing model of elliptic wing. PIV measurement and flow visualization of the wing near field were conducted to access the feasibility and effectiveness of the pulsed jet blowing on controlling the stall of the elliptical wing in subsonic flow. PIV experimental results show that separation control can provide significant reduction in turbulent flow wake and separation bubbles by jet blowing. The pulsating jet blowing is more effective on the separation control than continuous one. Increased jet frequency suppressed the turbulent separated flow wake effectively at even higher AOAs.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.431-436
• /
• 1998

표면장력이 운동량 방정식에 고려되어 완전한 방곡형으로 변환된 이상유동 방정식에 그동안 적용이 까다로왔던 고차의 Upwind 수치 방법을 처음으로 적용하였다. 이로인하여 기존의 유한 차분 수치 해석방법에서 필연적으로 나타나는 인위적인 감쇄 및 수치적 확산 문제를 개선할 수 있는 방법이 본 연구에 의해서 개발되었다 개발된 수치스킴은 MUSCL기법을 이용한 Flux of extrapolation방법을 사용하였고 시간에 대해서는 Fractional time step방법을 이용하여 공간 및 시간에 대하여 이차의 정확도를 가지게 하였다. 개발된 방범의 수치실험 결과 기존의 유한 차분법에서 발생하는 제반의 문제점들을 보완하고 보다 개선된 해를 얻을 수 있는 가능성을 확인하였다.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.1-3
• /
• 2016

대형 화물 트럭(heavy-duty truck)은 화물 적재에 용이하지만, 공기역학적으로 불리한 형상을 가진다. 이러한 단점을 극복하고자 대형 화물 트럭에는 공기저항력(aerodynamic drag)을 줄일 수 있는 여러 가지 장치가 달려있다. 본 논문에서는 디플렉터(deflector) 형상이 항력 감소에 어떠한 영향을 주며, 평판 형태와 굴곡진 형태의 디플렉터 형상에 대한 항력 계수 비교를 EDISON-CFD를 활용하여 비교하였다. 해석 결과, 측풍(side-wind)의 영향을 무시하며 차량 속도 95 km/h로 등속을 유지하는 조건에서 평판 형태의 Model 1과 바깥으로 굴곡진 Model 2에서 전체 항력 계수가 낮게 나타났다.