• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.10-15
• /
• 2002

The assessment of PIV to measure the mean velocity and turbulence was carried out over a train of fixed two-dimensional dunes. The agreement between the PIV and LDV is good enough even in regions of flow reversals and high shear. Though limited in the wall normal direction field-of-view, PIV provides instantaneous flow fields, which reveal the complex nature of flow over dunes, as well as more sophisticated analyses such as two-point space correlation and quadrant analysis with a reasonable accuracy The present study is expected to be directly applied to more complex flow such as sediment transport.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.2
• /
• pp.87-94
• /
• 2006

An experimental research program providing knowledge to measure two-dimensional skin friction variation over a certain region of model surface is presented. In the oil-fringe imaging skin friction(FISF) technique, local slope of a thin oil applied on a test surface is measured from the interference fringe patterns on the oil surface, and its information is then related to the applied shear over the oil by the thin-oil lubrication theory. The FISF technique has been applied for a separation flowfield ahead of a circular cylinder vertically mounted on a flat plate, and it has been found that the FISF skin friction results show good comparison with the other numerical/experimental data obtained for similar conditions. implying an applicability of the technique.

• Journal of computational fluids engineering
• /
• v.8 no.3
• /
• pp.1-6
• /
• 2003

Three-dimensional endwall flow within a linear cascade passage of high performance turbine blade is simulated with a 3-D Wavier-Stokes CFD code (MOSA3D), which is based on body-fitted coordinate system, pressure-correction and finite volume method. the endwall flow characteristics, including the development and generation of horseshoe vortex, passage vortex, etc. are clearly simulated, consistent with the generally known tendency The effects of both turbulence model and convective differencing scheme on the Prediction performance of endwall flow are systematically analyzed in the present paper. The convective scheme is found to have stronger effect than the turbulence modei on the prediction performance of endwall flow. The present simulation result also indicates that the suction leg of the horseshoe vortex continues on the suction side until it reaches the trailing edge.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.554-559
• /
• 2016

본 논문은 EDISON CFD를 사용하여 스포일러가 장착된 무미익 BWB UCAV에 대하여 이차원 유동해석을 수행하였다. 무미익 형상은 일반적인 항공기보다 롤과 요 방향의 안정성과 조성성에 있어 불리한 특징을 갖는데 특히 이 착륙 시 고 받음각의 영역에서 발생하는 Pitch-up 현상이 항공기 안정성에 문제를 야기한다. 수직 미익 부재와 pitch-up 현상으로 인한 BWB형상의 UCAV가 지니는 단점을 보완하기 위해서 스포일러가 장착된 형상이 적용되기도 한다 본 연구에서는 윗면과 아랫면에 스포일러가 장착된 경우에 대해 전산유동해석을 수행하였다. 해석결과 윗면의 스포일러는 양력의 감소와 항력의 증가를 야기했으며, 아랫면의 스포일러는 양력과 항력을 모두 증가시켰다. 피칭모멘트의 경우 아랫면의 스포일러가 저받음각에서 안정성을 증가시켰다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.479-486
• /
• 2011

In image-based CFD modeling of carotid bifurcation hemodynamics, it is often not possible (or at least not convenient) to impose measured velocity profiles at the common carotid artery inlet. Instead, fully-developed velocity profiles are usually imposed based on measured flow rates. However, some studies reported a pronounced influence of inflow boundary conditions that were based on actual velocity profiles measured by magnetic resonance imaging which showing the unusual presence of a high velocity band in the middle of the vessel during early diastole inconsistent with a Dean-type velocity profile. We demonstrated that those velocity profiles were induced by the presence of modest secondary curvature of the inlet and set about to test whether such more "realistic" velocity profiles might indeed have a more pronounced influence on the carotid bifurcation hemodynamics. We found that inlet boundary condition with axisymmetric fully-developed velocity profile(Womersley flow) is reasonable as long as sufficient CCA inlet length of realistic geometry is applied.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.857-862
• /
• 2011

3 dimensional turbine exhaust gas flow was simplified to an axisymmetrical flow and calculated with detailed chemistry models. GRI 35 species-217 reaction step model and simplified 11 species 15 reaction model was applied to the secondary reaction of the turbine exhaust gas and compared. All the model captured the secondary combustion on the base region, and the temperature was 600K higher than that without turbine exhaust gas. This means the local temperature of the base can be higher in the case of real 3 dimensional flow. The simplified model show the similar results to the GRI detailed chemistry model although the former affected the engine plume structure slightly.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.346-351
• /
• 2017

A numerical study has been conducted to investigate flow characteristics of STED with ram structure shape. By increasing the attack angle of shock cone, vacuum pressure is increased because of oblique shock at ram structure and separation point moved to the downstream of the second throat. By increasing blockage ratio, expansion wave angle is increased at ram structure while vacuum pressure is constant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.723-730
• /
• 2014

Experimental study for supersonic co-flowing fluidic thrust vectoring control utilizing the secondary flow is performed. The characteristics of the thrust vectoring of two dimensional supersonic flow (Mach 2.0) are studied by Schlieren flow visualization and highly-accurate multi-component force measurements using the load cells. It is observed that the thrust deflection angle initially decreases and increases again forming a V-shaped variation as the pressure of the secondary flow increases. Characteristics of the performance coefficients of the system are also studied, and the detailed operating conditions for higher performance of the technique are suggested.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.425-430
• /
• 1998

SMART 관류형증기발생기의 유동 불안정성을 분석할 수 있는 시간영역-비선형 해석모델을 개발하였다. 해석모델은 일차계통 모델을 포함하고 있으며 이차측 튜브 양단에 일정압력 경계조건을 이용하고 내부에서는 평형 균질 이상유동 모델을 도입하였다. 기존의 정상 상태 및 임계조건에 대한 실험 결과와 개발된 해석모델 모델을 이용한 계산 결과를 비교한 뒤 임계점 이후 나타나는 진동의 특성을 분석하였다. 개발된 해석모델은 SMART 관류형증기발생기에서 발생할 수 있는 유동 진동의 특성과 영향을 파악하고 유동 불안정성을 막기 위한 입구 오리피스 설계의 목적에 활용할 수 있을 것이다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.97.1-97.1
• /
• 2005