• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.66-77
• /
• 2009

This study aims at classifying and interpreting on the forest vegetation located in the whole area of Mt. Boryeonsan in Noeunmyeon, Chungju city, Chungcheongbuk Province, Korea using the methodology of the ZM school of phytosociology. The forest vegetation was classified into one Larix leptolepis afforestation, five secondary communities including Qurecus acutissima community, Pinus densiflora community, Quercus aliena community, Quercus serrata community, Quercus variabilis community and one association, Ainsliaeo-Quercetum mongolicae Song et al. 1999(Rhododendro schlippenbachii-Quercion mongolicae, Aceri pseudosieboldiani-Quercetalia mongolicae, Quercetea mongolicae). The research expatiated on the relationship between species composition of the forest communities and the environmental conditions, such as human interference, altitude, slope, topography and chemical properties of soil, and also analyzed the life form by each community. As a result, the Ainsliaeo-Quercetum mongolicae was judged as the most stable community among the forest communities identified here. On the other hand, a division of cluster analysis based on the dominance of the component species, appeared similar to the community units classified phytosociologically. Thus, it is inferred that the survey area will be dominated by the potential natural vegetation, Ainsliaeo-Quercetum mongolicae finally, if progressive succession is advanced continuously.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.153-164
• /
• 2015

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. we have mainly discussed the structual anisotropy formed by microcracks. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. The planes of principal set of microcracks are parallel to the rift plane and those of secondary set are parallel to the grain plane. These rift and grain microcracks are mutually near-perpendicular on the hardway planes. From the directional angle(${\theta}$) - total length($L_t$), number(N) and density(${\rho}$) chart, the curve patterns of the above microcrack parameters reflect the phases of distribution of microcracks. Microcrack parameters such as number, length and density show an order of rift > grain > hardway. These results indicate a relative magnitude of the rock cleavage. Meanwhile, brazilian tensile strengths were measured with respect to the six directions. The results revealed a strong correlation between mechanical property with the above microcrack parameters. These general results correspond to those of the previous study for Jurassic granites from Pocheon and Hapcheon. Image processing technique for the enlarged photomicrograph of the thin section was carried out. The grain 1(G1) microcrack arrays developed in quartz and feldspar grains show excellent distribution on the photomicrograph. In particular, the directional angle of each microcrack set can be ascertained easily by brief image processing for the above photomicrograph.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.267-277
• /
• 2012

This study was to evaluate the effects how to have an influence on activities daily living and quality of life in day hospital program for the stroke patient. 41 experimental groups and 41 control groups in National rehabilitation hospital selected and examined K-ADL, K-IADL and quality of life. The result of this study indicated that experimental group was higher than control group in activity daily living performance and instrumental activity daily living performance. also experimental group was higher than control group all of total items in quality of life. age and economic state of general characteristic had an effect on K-ADL, K-IADL and quality of life and economic state, scholarship, marriage, job, helper had effect on quality of life. pain, social function, mental health, physical role in item of quality of life had effect on K-ADL and limit of physical role had best effect on K-IADL. Consequently we found that it needs to continuous rehabilitation to maintain body function, to prevent secondary disability, to improve social integration and quality of life for stroke patient actually.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.460-469
• /
• 2006

This article complies a survey on the replacement of the posterior restorations and accesses possible factors that influence the replacement of posterior restorations. The data was collected from patients that visited department of conservative dentistry from Dec 1st 2003, to Sep 3rd 2004. Teeth was restricted to posterior permanent teeth. 9 dentists recorded age, gender of patients, tooth location, cavity farm and restorative material. They rated marginal adaptation, anatomic form, secondary caries of old restoration by modified Ryge criteria system. The statistical analysis was performed with Chi square test (p < 0.05) for replacement ratio according to patients, tooth factor and One way ANOVA was performed for comparison of old restoration according to restorative material. The results were as follows; 1. The female (62%) was statistically higher ratio than the male (38%). 2. The distribution of replacement case according to age, the rate of replacement was in descending order, 20's (38.3%), 40's (16.8%), 30's (15.9%), 10's (11.1%), 50's (9.2%), 60's (8.7%). 3. The rate of replacement was 88% for molar and 12% for premolar (p $gt; 0.05). 4. The rate of replacement was 39% for maxillar and 61% for mandible (p $gt; 0.05). 5. The material of restorations was amalgam (69%), gold inlay (17%), composite resin (13%). 6. In rating system by modified Ryge criteria system on margin adaptation, there was statistically significant difference between amalgam and gold inlay. But on anatomic form and caries, there was no statistically significant difference among the material of restorations.

• Korean Journal of Food Science and Technology
• /
• v.22 no.5
• /
• pp.539-542
• /
• 1990

The effects of immersion temperature $(20,\;40\;and\;60^{\circ}C)$ and immersion times (6. 12 and 18 min) in a distilled water prior to air dehydration upon the browning reaction and pyruvic acid content of air dried onions to a 4.071 moisture content (wet basis) were analyzed by a response surface methodology (RSM). Those values were also predicted by using a second degree polynomial regression model. Immersion temperature had more influence to browning reaction and pyruvic acid content than immersion time in these experimental ranges. The processing conditions to minimize the browning reaction of dried onions at $50^{\circ}C$ of air temperature (O.D.=0.071) were $60^{\circ}C$ of immersion temperature and 18 min of immersion time compared to control (O.D.=0.168) of air dehydration at $50^{\circ}C$ Pyruvic acid contents of dried onions at $50^{\circ}C$ of air temperature were maximized $(39.85{\mu}mole/g\;onion\;solid)$ at $60^{\circ}C$ of immersion temperature and 12 min of immersion time compared to control $(24.08{\mu}mole/g\;onion\;solid)$ of air dehydration at $50^{\circ}C$.

• IMMUNE NETWORK
• /
• v.6 no.2
• /
• pp.93-101
• /
• 2006

Background: Memory T lymphocytes of the immune system provide long-term protection in response to bacterial or viral infections/immunization. Ag concentration has also been postulated to be important in determining whether T cell differentiation favors effector versus memory cell development. In the present study we hypothesized that naive Ag-specific $CD4^+$ T cells briefly stimulated with different Ag doses at the primary exposure could affect establishment of memory cell pool after secondary immunization. Methods: To assess this hypothesis, the response kinetics of DO11.10 TCR $CD4^+$ T cells primed with different Ag doses in vitro was measured after adoptive transfer to naive BALB/c mice. Results: Maximum expansion was shown in cells primarily stimulated with high doses of ovalbumin peptide $(OVA_{323-339})$, whereas cells in vitro stimulated with low dose were expanded slightly after in vivo secondary exposure. However, the cells primed with low $OVA_{323-339}$ peptide dose showed least contraction and established higher number of memory cells than other treated groups. When the cell division was analyzed after adoptive transfer, the high dose Ag-stimulated donor cells have undergone seven rounds of cell division at 3 days post-adoptive transfer. However, there was very few division in naive and low dose of peptide-treated group. Conclusion: These results suggest that primary stimulation with a low dose of Ag leads to better memory $CD4^+$ T cell generation after secondary immunization. Therefore, these facts imply that optimally primed $CD4^+$ T cells is necessary to support effective memory pool following administration of booster dose in prime-boost vaccination.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.17-27
• /
• 2000

This paper presents deposition and characterization of hydrogenated microcrystalline silicon (${\mu}c$ -Si:H) films on low cost glass substrate by Hot Wire CVD(HWCVD). The HWCVD ${\mu}c$ -Si:H films had deposition rates ranging from 2${\AA}$/sec to 35${\AA}$/sec with the variations of preparation conditions, which was 10 times higher than that of the films obtained from the conventional PECVD method. From the Raman spectroscopy, the prepared silicon films were found to be composed of the mixture of crystalline and amorphous phases. The crystalline volume fraction and average crystallite size, obtained from the Raman To mode peak near 520cm$^{-1}$, were 37-63% and 6-10 nm, respectively. The conductivity activation energy($E_a$) of the ${\mu}c$ -Si:H films, representing the difference of conduction band and Fermi level in an intrinsic semiconductors, increased from 0.22eV to 0.68eV with increasing pressure from 30mTorr to 300mTorr. The increase of $E_a$ with pressure indicates that the deposited films have properties close to intrinsic semiconductors, which is also proved with low dark conductivity of the ${\mu}c$ -Si:H deposited at 300mTorr. The tungsten concentration incorporated into films was about $6{\times}10^{16}atoms/cm^3$ in the samples prepared at wire temperature of 1800$^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.219-223
• /
• 2000

All-solid state lithium rechargeable thin film batteries were fabricated with the configuration of$Cu_{0.5}V_2O_5/Lipon/Li$ using sequential thin film techniques. Copper vanadium oxide thin films and Lipon thin films were prepared by DC reactive dual source magnetron sputtering and RF magnetron sputtering, respectively. According to XRD analysis, we found out that copper vanadium oxide thin films were amorphous. The electrochemical behaviour of them was examined in half cell system using EC : DMC(1:1 in IM $LiPF_5$) liquid electrolyte. The ionic conductivity of Lipon thin film was $1.02\times10^{-6}S/cm$ at $25^{\circ}C$ and $Cu_{0.5}V_2O_5/Lipon/Li$ cell showed that the discharge capacity was about $50{\mu}Ah/cm^2{\mu}m$ beyond 500cyc1es.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.353-362
• /
• 2009

The present study was performed to observe the effect of phytoncide on oral normal microflora and the inhibitory effect of the surviving resident oral bacteria on F. nucleatum. In this study, saliva from each of 20 healthy subjects was treated with 1% phytoncide from Japanese Hinoki (Chamaecyparis obtusa Sieb. et Zucc.). The surviving salivary bacterium were isolated on blood agar plates and identified by 16S rDNA sequencing. In order to select inhibitory isolates against F. nucleatum, the isolates from the phytoncide-treated saliva were cultured with F. nucleatum. The results are as follows: 1. Among the 200 surviving resident oral bacterium, 70(35.0%) bacterium inhibit the growth of F. nucleatum on blood agar plates. 2. Among the 70 bacterium which inhibit F. nucleatum, Streptococcus salivarius was 41.3%(45/109), Streptococcus sanguinis was 28%.(7/25), Streptococcus mitis was 20%(3/15), Streptococcus parasanguinis was 33.3%(3/9), Streptococcus Alactolyticus was 100%(8/8), Streptococcus vestibularis was 28.6%(2/7) and Streptococcus sp. was 50%(2/4). Taken together, among the surviving resident oral bacterium, Streptococcus salivarius, Streptococcus sanguinis, Streptococcus mitis were mainly observed to inhibit F. nucleatum. and they may exert an additional inhibitory activity against the periodontopathic bacterium. Therefore, phytoncide can be used to prevent and cease the progress of periodontal disease, halitosis. Thus it is expected to promote oral health.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.306-306
• /
• 2008

기계적 에너지를 전기적 에너지로 변환하는 에너지 변환소자인 압전 세라믹스는 액추에이터, 변압기, 초음파모터, 초음파 소자 및 각종 센서로 응용되고 있으며, 그 응용분야는 크게 증가하고 있다. 최근에는 이러한 압전 소자를 앞으로 도래하는 ubiquitous, 무선 모바일 시대의 휴대용 전자제품, robotics, MEMS 분야 등의 대체 에너지원으로 응용하기 위한 연구가 진행되고 있다. 특히 인간의 걷기 운동 등과 같은 일상적인 동작으로 필요한 전력을 얻을 수 있고, 세라믹 소자를 이용하기 때문에 전자노이즈가 발생되지 않을 뿐 아니라 반영구적으로 사용할 수 가 있어서, 기존 이차전지를 대체 또는 보완 할 수 있는 방안도 검토되고 있다. PZT계 세라믹스는 높은 유전상수와 우수한 압전특성으로 전자세라믹스 분야에서 가장 널리 사용되어지고 있지만 $1200^{\circ}C$ 이상의 높은 소결온도 때문에 $1000^{\circ}C$ 부근에서 급격히 휘발되는 PbO로 인한 환경오염과 기본조성의 변화로 인한 압전 특성의 저하가 문제시 되고 있다. 또한 적층 세라믹스의 제작 시 구조적 특성상 내부전극이 도포된 상태에서 동시 소결이 필요한데, 융점이 낮은 Ag전극 대신 값비싼 Pd나 Pt가 다량 함유된 Ag/Pd, Ag/Pt 전극이 사용되고 있어 경제성이 떨어지는 단점을 갖게 된다. 순수 Ag 전극을 사용하거나 Ag의 비율이 높은 내부전극을 사용하기 위해서는 $900^{\circ}C$ 이하에서 소결되고 우수한 전기적 특성을 보이는 압전 세라믹스를 개발 하는 것이 필요하다. 따라서 본 연구에서는 압전특성이 우수한 $(Pb_{1-x}Cd_x)(Ni_{1/3}/Nb_{2/3})_{0.25}(Zr_{0.35}/Ti_{0.4})O_3$ 계의 조성을 설계하고, 소걸온도를 낮추기 위해서 2 단계 하소법을 이용하였다. 또한 $MnCO_3$, $SiO_2$, $Pb_3O_4$ 등을 소량 첨가하여 액상 소결 특성을 부여하여 소결 온도를 감소시키려는 시도도 하였다. 분말을 볼 밀링 (ball milling)을 통해 24시간 동안 혼합하고, 혼합된 분말은 $800^{\circ}C$에서 2시간 동안 하소하였다. 하소한 분말을 다시 72시간 동안 볼 밀링 하여 최종 분말을 얻었다. 최종 분말에 PVB를 첨가하여 직경 15mm의 디스크 형태로 성형한 후, 850~$975^{\circ}C$ 범위에서 온도를 변화시키면서 소결을 하였다. 최종 분말 및 소결된 시편을 XRD분석을 통하여 상을 확인하였고, SEM을 이용하여 미세조직을 관찰 하였다. 전기적 특성을 평가하기 위하여 두께를 1mm로 연마한 시편에 Ag 전극을 도포하여 $650^{\circ}C$에서 열처리한 후, 분극처리 하였다. 압전특성은 $d_{33}$-meter로 측정하였고, impedance analyzer를 이용하여 압전 특성 (전기기계결합계수 및 기계적품질계수)을 측정 하였다. 또한 강유전체 특성 평가 장치 (Precision-LC)를 이용하여 분극-전계 특성을 평가하였다. 이상의 연구를 통하여 소결 온도가 $900^{\circ}C$인 경우에서도 양호한 압전 특성을 확보 할 수 있었다.