• The KIPS Transactions:PartC
• /
• v.8C no.4
• /
• pp.429-436
• /
• 2001

IMT-2000에서 RNC의 MCP는 호 처리를 담당하는 부분으로, 신뢰도와 실시간성이 요구된다. MCP는 높은 견고성을 갖도록 구현되지만 다소간의 오류 율(Fault late)은 존재할 수밖에 없으므로 프로세서를 이중화하여 활성화된 프로세서가 장애를 일으키더라도 대기중인 프로세서가 연속적인 서비스를 제공할 수 있어야한다. Warm standby sharing에 비하여 Hot standby sharing은 데이터 손실이 없고 오류 데이터가 확산되지 않는 등의 다수의 장점을 갖지만 동기화 문제로 인하여 이를 시스템에 실제로 구현하는 것은 어렵다. 따라서 본 연구에서는 Hot standby sharing에 비하여 기존의 Warm standby sharing이 갖는 동기화의 장점에 데이터 손실 및 거짓 데이터의 확산 문제를 개선함으로서, 실제 구현의 용이성 및 성능 향상이라는 결과를 얻으려 하였다.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.231-240
• /
• 1999

The temperature distribution in double-concentric diffusion flames have been investigated experimentally by rapid insertion technique. Using a fine thermocouple and rapid insertion mechanism, the temperature has been measured before soot particles attach the thermocouple junction which can affect the temperature signal by changing the radiation heat loss. For double-concentric diffusion flames, the temperature at the axis is higher than that of normal coflow diffusion flames because of the inverse diffusion flame at the center of the flame. However, it is almost same at the periphery on which the inverse flame does not have an effect.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.121-129
• /
• 1999

Double-diffusive convection with verical temperature and concentration gradients in thermally stratified fluids has been investigated experimentally using an electrochemical technique. Cupric sulfuric-sulffuric acid solution confined between two horizontal copper electrodes was used. The change of thermal and solutal buoyance has no influence on the range of voltage for the limiting current. Due to Soret effect, the onset time of natural convection is delayed as the stabilizing thermal buoyancy decreases. Also it is found that the shrinkage of the unstabilizing solutal buoyancy makes the onset of natural convection retard. Multi-layered convective phenomena do not appear because cupric sulfate-sulfuric acid solution is thermally stratified, and heat diffuses faster than cupric sulfate solfate solution.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.595-598
• /
• 2011

Supersonic combustion phenomena in the main combustor of a dual combustion ramjet (DCR) engine are studied numerically. Since the supersonic combustion is affected significantly by the compressibility effects parametric studies have been carried out for the constant are length and the divergence angle. Numerical studies with fixed inflow condition for different geometric configurations reveals that the supersonic combustion in DCR combustor has the characteristics of lifting flame, where the lifting flame is maintained near the injector tip for the case of long combustor length with small divergence angle, but the lifting height is significantly increase for large divergence angle resulting flame blow-out of the combustor. Therefore, it is concluded that flame stability should be considered sufficiently in the design o DCR combustor.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.600-608
• /
• 2022

This study investigates the effect of layered double hydroxide (LDH) on the healing performance of self-healing concrete by assessing the chloride penetration resistance of self-healing cement mortars using electrical chloride ion migration-diffusion test. Test results show that both mortars containing healing materials only and mortars containing healing materials and Ca-Al LDH together mostly had higher migration-diffusion coefficients right after cracking, but the migration-diffusion coefficients decreased more than that of OPC with increasing healing ages, and thus, they yielded higher healing capacities than OPC. Also, mortars containing Ca-Al LDH together with healing materials showed higher reduction of their migration-diffusion coefficients, and thus, higher healing capacities than mortars containing healing materials only. This suggests that as the self-healing product increases on the crack surface, the binding of chloride ions by LDH inside the crack increases.

• 한국전기화학회:학술대회논문집
• /
• 1998.10a
• /
• pp.41-41
• /
• 1998

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.26-30
• /
• 2013

This article is experimentally to investigate thermal-flow characteristics of the magnetic fluid for concentric annuli under externally fixed magnetic fields using visualization technique. Temperatures of the inner tube and outer tube in the tested concentric annuli were constantly maintained at both $30^{\circ}C$ and $25^{\circ}C$ and the middle tube was filled with the magnetic fluid. Magnetic field was uniformly applied using 4 permanent magnets at 4 directions of the concentric annuli. As a result, the thermal-flow characteristics of the magnetic fluid for concentric annuli could be controlled by directions of the external magnetic fields.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.249-264
• /
• 2008

In this dissertation, shallow $p^+-n$ junctions were formed by ion implantation and dual-step annealing processes and a new simulator is designed to model boron diffusion in silicon. This simulator predicts the boron distribution after ion implantation and annealing. The dopant implantation was performed into the crystalline substrates using $BF_2$ ions. The annealing was performed with a RTA(Rapid Thermal Annealing) and a FA(Furnace Annealing) process. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of sheet resistance and the simulator reproduced experimental data successfully. Therefore, proposed diffusion simulator and FA+RTA annealing method was able to applied to shallow junction formation for thermal budget. process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.161-161
• /
• 2007

금속 게이트 전극으로 활용하기 위해서 두 가지의 금속박막으로 구성된 이중 금속층을 D.C. Magnetron sputtering 방식으로 증착하여 MOSCAP을 제작하였다. 박막의 적층 구조 및 열처리에 따른 계면반응을 AES, XPS를 통해 분석하였고, XRD 측정을 통해 결정상을 분석하였다. 또한 박막의 두께 및 열처리에 따른 전기적 특성과 workfunction 변화를 관찰하기 위해 I-V, C-V 분석을 진행하였다. 열처리 전후의 이중 금속층의 workfunction은 두 금속층의 확산의 정도에 따라서 열처리 전에는 하위금속층의 workfunction에서 열처리 후에는 상위금속층의 workfunction 값과의 중간값으로 변화하였다. 또한 열처리에 따라 두 금속층 중간에 새로운 금속간 화합물이 형성될 경우 이중 금속층의 workfunction은 새로운 금속간 화합물의 workfuction 값을 나타내었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.191-192
• /
• 2018

해안을 따라 인구밀도가 증가하고 임해지역공단 등 산업시설이 밀집하여 처리되지 않은 하 폐수가 증가하고 있다. 특히, 최근엔 필리핀 보라카이와 같이 관광 위락시설에 의한 하수가 대량으로 발생하고 있다. 또한, 세계적으로 거의 모든 국가의 주요 해안도시는 이러한 도시하수를 바다로 방류하고 있다. 현재로선 이러한 하 폐수의 처리는 바다의 자정능력(self-purification capacity) 한계를 고려한 하수의 해양으로의 방류가 최선의 방법으로 판단된다. 현재 국내에서는 지역에 따른 배출허용기준에 따라 하수의 처리수 방류가 규제되고 있지만, 확산영역에 대한 법적 기준치는 제시되지 않고 있으며, 인근에 위치한 권리자들과의 이해관계 해결에만 몰두하고 있는 실정이다. 또한 확산영향예측이 원역 해석모형(Far Field analysis model)에 의해 수행되기 때문에 근역(Near Field)에서의 영향을 간과하고 있다고 판단된다. 따라서 금회 연구에서는 기존 연구결과를 기준하여 특정해역에 대한 원역과 근역 해석에 따른 확산영향 예측을 수행하고 그 결과를 비교하여 앞으로의 해석방법을 제시하고자 한다.