• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.31-35
• /
• 2003

본 논문에서는 이중접속 방식의 멀티스텝 인버터를 인 용한 대용량 STATCOM에 관하여 동작원리 및 제어 방식을 기술하기로 한다. 기존의 12-스텝 인버터에 상간 변압기 및 간단한 보조회로를 이용하여 출력전압의 파형을 36-스텝으로 개선하였다. 이러한 방식의 인버터는 10Mvar$\~$30Mvar급 전후의 STATCOM에 적용하면 경제적이다. 2KVA급 STATCOM 시작품의 실험결과로부터 제안한 방식의 타당성을 입증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.36-41
• /
• 2004

In this paper a large scale STATCOM using double-connected multi-step inverter is proposed and operating principle along with control method is detailed. A simple auxiliary circuit including an interphase transformer is employed to improve output voltage waveform of 12-step into 36-step. The proposed scheme could be a cost effective approach in high power applications such as 10MVar to 30MVar STATCOM. Experimental results from a 2KVA laboratory prototype show validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.561-565
• /
• 2004

본 논문에서는 새로운 이중접속 방식의 60-스텦 인버터를 제안하고 이를 이용한 대용량 STATCOM에 관하여 동작원리 및 제어방식을 기술하기로 한다. 제안한 이중접속 방식의 60-스텦 인버터는 기존의 12-스텦 인버터에 간단한 보조회로를 추가하여 출력전압의 파형을 60-스텦으로 개선하였다. 제안한 방식의 인버터는 커패시터의 전압분할이 필요하지 않아 간접제어 방식의 적용이 용이하며 10Mvar~30Mvar급 이하의 STATCOM에 적용하면 경제적이다. 2KVA급 시작품의 실험 결과로부터 제안한 방식의 타당성을 입증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.547-553
• /
• 1999

A new multi-step voltage source inverter is proposed in this paper. The proposed scheme is composed of t the double-connected 12-step inverter with an auxiliary circuit. The auxiliary circuit includes two voltage d dividing capacitors, two switching devices and a low KV A autotransformer. The resultant system is shown to b be a 24-step inverter suitable for medium power level SVC applications in which the PWM method can not be e employed. A 36-step operation can also be 이)tained by the addition of a bidirectional switch to the ProlXlsed I inverter. The design parameters are derived from the analysis of voltages and currents by means of switching f functions. The validity of the proposed scheme is confirmed by the simulated and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.30-39
• /
• 1997

In this paper, a new practical coherent detection scheme for biorthogonal signals, which uses multi-symbol observation interval, is proposed and its performances are analyzed and simulated. The technique jointly estimates both the demondulated data and the channel from received signal only while reducing computation complexity by an approximate maximum-likelihood sequence estimation rather than symbol-by-symbol detection as in previous noncoherent detection. The scheme achieves performance close to that of ideal coherent detection with perfect channel estimates when select the appropriate observation symbol interval N in the given symbol alphabet wize M. What is particularly interesting is that the requeired average signal-to-noise ratio per bit ${\gamma}_{b}$ can be reducedd by as much as 1.4dB and the capacity can be increase by as much as 38% when we use this system in the CDMA cellular reverse link.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.21-26
• /
• 2001

This paper proposes a new double-connected 3-phase voltage source inverter with improved output voltage waveform. An auxiliary single-phase inverter injects a ripple voltage into the double-connected inverter to converter 12-step operation to 36-step operation. The KVA rating of the output phase-shifting transformer is reduced by employing a harmonic canceling reactor. The whole rectifier-inverter system including the proposed technique is introduced, and the experimental results are provided.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.584-586
• /
• 1999

본 논문에서는 파장 재사용 이중 단일홉 WDM(Wavelength Division Multiplexing) 통신망에서 전체 노드의 수가 사용 가능한 파장의 수보다 클 경우에 트래픽의 지역성(locality)을 고려하여 시간 분할 다중 접속 (TDMA) 방식으로 파장을 이용하는 다중 접근 알고리즘을 제안한다. 사용 가능한 파장을 그룹내에서 사용하는 전역 파장과 그룹간의 통신에 사용하는 지역 파장으로 나누고 전역 파장은 통신망에 속하는 모든 노드가 공유하고 지역 파장은 그룹내의 노드가 공유한다. 따라서 지역 파장은 모든 그룹 내에서 재사용 가능하기 때문에 전체 파장의 사용율이 증가한다. 모든 노드는 전역파장와 지역 파장으로 동조 가능한 하나의 동조 송신기와 전역 파장 중에 하나의 파장으로 수신 파장이 고정된 고정 수신기와 지역 파장 중에 하나의 파장으로 수신 파장이 고정된 고정 수신기를 가진다. 제안하는 알고리즘은 노드에서 패킷의 전송 요구가 필요한 만큼 슬롯 시간을 할당받아 모든 패킷을 연속해서 전송하는 슬롯 예약 방식을 채택한다. 이 방식은 동조 시간을 최소화함으로써 슬롯 시간을 모드 노드가 균일하게 할당하여 전체 동조 시간이 길어지는 고정 할당 방식보다 파장 사용율이 효율적이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.175-182
• /
• 2018

As Internet of things with a large number of nodes emerges, wireless-power communication networks (WPCN) based on a random access protocol needs to be investigated. In the random access-based WPCN, a terminal accessing later in given random access (RA) slots can harvest more energy before transmission and thus can transmit data with higher power and achieve higher throughput if the access is successful. On the basis of this property, the proposed random access control protocol gives the terminals priority and distinguishes the RA slots according to the priority level, so that a near terminal with access point allows to access preferentially other than a remote terminal. This operation decreases the throughput of near terminal and increases the throughput of remote terminal, and then, the doubly near-far problem in WPCN is resolved and the user fairness is improved. Results show that the proposed random access control improves both channel throughput and user fairness according to the priority level.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.460-463
• /
• 1999

A new multi-step voltage source inverter is proposed in this paper. The proposed scheme is composed of the double-connected 12-step inverter with an auxiliary circuit. The auxiliary circuit includes two voltage dividing capacitors, two switching devices and a low KVA autotransformer. The resultant system is shown to be a 24-step inverter suitable for large scale SVC applications in which the PWM method can not be employed. The design parameters are derived from the analysis of voltages and currents by means of switching functions. The simulation results verify the proposed concept.