• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2012

Radioactive waste transport package was developed to transport eight drums of low and intermediate level waste(LILW) in accordance with the IAEA and domestic related regulations. The package is classified with industrial package IP-2. IP-2 package is required to undergo a free drop test and a stacking test. After free drop and stacking tests, it should prevent the loss or dispersal of radioactive contents, and loss of shielding integrity which would result in more than 20 % increase in the radiation level at any external surface of the package. The objective of this study is to establish the safety test method and procedure for stacking test and to prove the structural integrities of the IP-2 package. Stacking test and analysis were performed with a compressive load equal to five times the weight of the package for a period of 24 hours using a full scale model. Strains and displacements were measured at the corner fitting of the package during the stacking test. The measured strains and displacements were compared with the analysis results, and there were good agreements. It is very difficult to measure the deflection at the container base, so the maximum deflection of the container base was calculated by the analysis method. The maximum displacement at the corner fitting and deflection at the container base were less than their allowable values. Dimensions of the test model, thickness of shielding material and bolt torque were measured before and after the stacking test. Throughout the stacking test, it was found that there were no loss or dispersal of radioactive contents and no loss of shielding integrity. Thus, the package was shown to comply with the requirements to maintain structural integrity under the stacking condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.105-115
• /
• 2014

A numerical analysis on the smoke behavior and evacuee safety has been performed with computational fluid dynamics. The purpose of this study is to build computational processes for an evacuation and prevention of a fire disaster of a 3 km-length tunnel in Korea. To save computational cost, 1.5 km of the tunnel that can include a few cross-passing tunnels is considered. We are going to assess the fire safety in a road tunnel according to the smoke level, which consists of the smoke density and the height from the floor. The smoke density is obtained in detail from three-dimensional unsteady CFD analysis. To obtain proper temperature distributions on the tunnel wall, one-dimensional conduction equation is considered instead of an adiabatic wall boundary or a constant heat flux. The tunnel considered in this study equips the cross passing tunnels for evacuees every 250 m. The distance is critical in both safety and economy. The more cross passing tunnels, the more safe but the more expensive. Three different jet fan operations can be considered in this study; under- and over-critical velocities for normal traffic condition and 0-velocoty operation for the traffic congestion. The SE (smoke environment) level maps show a smoke environment and an evacuating behavior every moment.

• Journal of Biomedical Engineering Research
• /
• v.38 no.3
• /
• pp.116-122
• /
• 2017

Physical breast phantoms would be useful for the development of a dedicated breast computed tomography (BCT) system and its optimization. While the conventional breast phantoms are available in compressed forms, which are appropriate for the mammography and digital tomosynthesis, however, the BCT requires phantoms in uncompressed forms. Although simple cylindrical plastic phantoms can be used for the development of the BCT system, they will not replace the roles of uncompressed phantoms describing breast anatomies for a better study of the BCT. In this study, we have designed a numerical voxel breast phantom accounting for the random nature of breast anatomies and applied it to the 3D printer to fabricate the uncompressed anthropomorphic breast phantom. The numerical voxel phantom mainly consists of the external skin and internal anatomies, including the ductal networks, the glandular tissues, the Cooper's ligaments, and the adipose tissues. The voxel phantom is then converted into a surface data in the STL file format by using the marching cube algorithm. Using the STL file, we obtain the skin and the glandular tissue from the 3D printer, and then assemble them. The uncompressed breast phantom is completed by filling the remaining space with oil, which mimics the adipose tissues. Since the breast phantom developed in this study is completely software-generated, we can create readily anthropomorphic phantoms accounting for diverse human breast anatomies.

• Korean Security Journal
• /
• no.62
• /
• pp.185-203
• /
• 2020

While overall crime has been on the decline since 2009, voice phishing has rather been on the rise. The government and academia have presented various measures and conducted research to eradicate it, but it is not enough to catch up with evolving voice phishing. In the study, researchers focused on catching criminals and preventing damage from voice phishing, which is difficult to recover from. In particular, a voice phishing prediction method using the Fraud Detection System (FDS), which is being used to detect financial fraud, was studied based on the fact that the victim engaged in financial transaction activities (such as account transfers). As a result, it was conceptually derived to combine big data such as call details, messenger details, abnormal accounts, voice phishing type and 112 report related to voice phishing in machine learning-based Fraud Detection System(FDS). In this study, the research focused mainly on government measures and literature research on the use of big data. However, limitations in data collection and security concerns in FDS have not provided a specific model. However, it is meaningful that the concept of voice phishing responses that converge FDS with the types of data needed for machine learning was presented for the first time in the absence of prior research. Based on this research, it is hoped that 'Voice Phishing Damage Prediction System' will be developed to prevent damage from voice phishing.

• The Korea Journal of Herbology
• /
• v.30 no.4
• /
• pp.81-88
• /
• 2015

Objectives : The aim of present study was to evaluate the beneficial effect of Scutellariae Radix (SR) and Scutellariae Radix EtOH-heated at 200℃ (SR200) using lipopolysaccharide (LPS) treated intestine of mice.Methods : Extract of SR and SR200 were orally administrated. Their effects were compared with vehicletreated LPS and normal groups. Subsequently, we measured reactive oxygen species (ROS) and nitric oxide in the serum and western blotting in the intestine.Results : The average weight in LPS treated (Vehicle) group was lowered significantly compare to that in non-treated normal group and this weight loss in the vehicle group was effectively prevented by the administration of SR and SR200 respectively. The increased oxidative stress biomarker levels such as reactive oxygen species (ROS) and nitric oxide (NO) in the serum was markedly decreased by treated with SR200. The decreased levels of superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx) induced by LPS injection were significantly restored by both SR and SR200 treatment. Moreover, increased inflammatory mediators and cytokines such as inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2), tumor necrosis factor alpha (TNF-α) and interleukin-6 (IL-6) in the LPS treated vehicle mice were significantly decreased through down-regulation c-JUN through reduction of oxidative stress.Conclusions : SR and SR200 could have benefit effect through down-regulation of abnormal oxidative stress in LPS induced intestine injury mice. Moreover, The anti-inflammatory activity of SR200 extract was better than SR extract in the LPS induced intestine injury mice.

• Korean Journal of Social Welfare
• /
• v.69 no.1
• /
• pp.79-101
• /
• 2017

The purpose of this study is to identify the multicultural competence of university students majoring in social welfare studies and to verify the influence of human rights attitude and spiritual intelligence that affect multicultural competence using structural equation model. Spiritual intelligence was set as an independent variable and multicultural competence was set as a dependent variable. Human rights attitude was established as a mediating variable. Study subjects were 259 university students majoring in social welfare studies at 5 universities in the Daegu, Gyoungbuk area. Spiritual intelligence and human rights attitude appeared to have a significant effect on multicultural competence, indicating that a higher level of spiritual intelligence and human rights attitude were correlated with a higher level of human rights attitude. Also in the pathway of spiritual intelligence on multicultural competence, human rights attitude had a significant mediating effect. When the university student majoring in social welfare studies had a high level of spiritual intelligence including transcendence and meaning and purpose of life, their perspective on human rights which is important in the practice of social welfare affected the multicultural competence required to assist immigrants of various identities. Based on the findings of the study, it is recommended for the university students majoring in social welfare to have the "three-multi-sensitivities" including sensitivity of multicultural competence, sensitivity of spiritual intelligence, and sensitivity of human right attitude.

• Journal of Acupuncture Research
• /
• v.31 no.4
• /
• pp.81-97
• /
• 2014

Objectives : The purpose of this study is analyzing the current research methodology of pharmacopucture for the treatment of animal cancer models. Methods : Four electronic databases were searched for animal studies published from January 2000 to September 2014 onward using these search terms "cancer, anticancer, pharmacopuncture, beevenom". Selected articles were described about animal cancer models. The methods used to induce cancer and the outcome measures used to assess the effects of pharmacopuncture on animal cancer models were analyzed. Results : 37 articles were included. For producing animal cancer models BALB/C mice(n=22) and C57BL/6 mice(n=17) were selected. And intravenous injection of B16-F10 melanoma cells into tail vein(n=14) or intraperitoneal injection of sarcoma-180 cells(n=14) were frequently used to induce cancer. Various pharmacopunctures were injected into acupoints $CV_{12}(n=19)$, $ST_{36}(n=8)$, $BL_{18}(n=8)$ or peritoneal cavity(n=6), tumor site(n=2), tail vein(n=2). Outcome measures were categorized into anti-cancer, anti-metastasis, general condition, cytotoxicity, immune response, toxicity. Median Survival Time(MST) and increase of life span(ILS)(n=26) was frequently used for evaluating anti-cancer effects. And pulmonary colonization assay(n=13) was frequently used for evaluating anti-metastasis effects Conclusions : Based on these data, further research would be needed to ascertain the effectiveness of pharmacopuncture for treating cancer and broaden the range of clinical applications.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.471-475
• /
• 2013

This study is about photosensitive microspheres prepared by coating alginate microspheres with gelatin-cinnamic acid conjugate. Firstly, alginate microspheres was prepared in water-in-oil (W/O) emulsion and then they were coated with gelatin- cinnamic acid conjugate. Herein, gelatin-cinnamic acid conjugate is obtained by the amidation between an amine group of gelatin and a carboxy group of cinnamic acid. Cinnamic acid is widely used as a photo-responsive material easy to dimerize and dedimeriz under UV irradiation at ${\lambda}$ = 254 nm and ${\lambda}$ = 365 nm, respectively. As shown in SEM-EDS, alginate was successfully coated with gelatin-ciannmic acid. By determining the absorbance of coated microspheres at 270nm, the amount of cinnamic acid per microspheres was 0.13/1. The SEM photos showed the size of coated microspheres is around $10{\mu}m$. And the degrees of dimerization and dedimerization were calculated to be 49% and 23% respectively. Then the release of FITC-dextran from the coated micrspheres was studied and release the degree was 42%. As a result, the coated microspheres have potential to be used as a photo-responsive drug carrier to delivery drugs.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1389-1395
• /
• 2009

Generally, it takes a long time to purify wood vinegar, and it contains toxic compounds such as tar, methanol, phenol and benzopyrene. To reduce the toxicity of wood vinegar itself, we have developed a new purification method of wood vinegar using an oxidation-cohesion reaction and distillation with an active carbon. We have investigated the physico-chemical change (pH, specific gravity, refractive index and dissolved tar), the change of amount of toxic compounds (carbonyl group, phenol, benzopyrene and residual solvents) and organic acids (formic acid (FA), acetic acid (AA), propionic acid (PA)) of the purified wood vinegar under the long term and accelerated storage conditions. Also, we have evaluated the effect of the purified wood vinegar on hair growth using an alopecia model of C57BL/6 mice. As a result, we could find out that the purified wood vinegar was stable and remained without decay under the storage conditions and benzopyrene, a carcinogenic agent, was not detected in the purified wood vinegar. After topical treatment of the purified wood vinegar solution or minoxidil (MXD) for 2 weeks to dorsal skin, the hair regrowth of the mice accelerated faster than that of the control, with no clinical signs. In conclusion, we could suggest a guideline for quality control of process to reduce the toxic compounds in wood vinegar and it might be a useful hair growth promoter in the treatment of baldness or alopecia.

• Korean Journal of Veterinary Research
• /
• v.38 no.3
• /
• pp.544-552
• /
• 1998

A random study of 574 dairy farms in Gyeongnam area was designed to determine 1) management factors that may be associated with the occurrence of drug residues; 2) the dairy farmer's attitudes and knowledge about residues; 3) how these variables influence the occurrence of residues in dairy cattle. Management factors perceived as having the greatest influence on drug residues in milk were insufficient knowledge about withdrawal periods, errors due to hired help, insufficient identification and record of animals treated for mastitis, dry cow treatment for mastitis, and metritis treatment. Seventy-one percent of farms with residues problem used mixed own feeds compared with twenty-nine percent of farms with premedicated feeds. Factors significantly associated with the occurrence of residues were herd size, increased number of hired persons, increased frequency of use of mixed-own feeds, category of medicated feed, and producer's attitude toward the public health significance of residues. Our findings suggest that residue occurrence was mainly associated with errors due to hired help, insufficient knowledge about withdrawal periods, poor animal identification and records of treatment animals and use of medicated feeds. Any residue avodiance educational program needs to stress how to deal with these factors. This educational program should be directed to dairy farmers and employees, especially temporary employees. In addition, Dairy farmer's attitudes and knowledge about drug residues need to be improved. More evidence on the public healths significance of residues should be available to them. Because belife in importance of public healths concerns was related to successful residue avidance and because 81.3% of the dairy farmers with residue problem thought public healths concerns were less important than economic ones, it would be helpful to provide educational programs specifically directed to this issue. it may be useful to provide programs not only for the dairy farmers but also change of their concerns about on the public healths.