• Parasites, Hosts and Diseases
• /
• v.36 no.2
• /
• pp.127-132
• /
• 1998

Immunotherapy has been used in support of trimethoprim-sulfamethoxazole treatment for Pneumocvstis corinii pneumonia. The present study investigated the therapeutic or preventive effects of heterogeneous hyperimmune IgG antibody (HIA) in experimental rats. Their immunity was suppressed by steroid injection, and they were also injected peritoneally with HIA which reacted with 40-55, 92, 116, and 200 kDa bands of the crude antigen. All rats were infected by p. ccrinii and the cystic forms on lung impression smears were counted. The count was 20.5-76.5 (mean 52.5 ± 19.)1 in those which received steroid only, but decreased to 6.0-21.0 (mean 13.5 : 10.6) in those of group 3 which received HIA for the same duration. In other groups, the mean count ranged from 29.9 t 32.9 to 54.1 t 47.7, and in those which received 13.7 mg HIA the reduction effect was greater than in those which received 6.8 mg or 20.5 mg HIA. The present finding confirmed that in rats during the early stage of infection, the heterogeneous HIA to MSG antigen bands had a partial effect on p. cori,nii pneumonia, both prophylactically and therapeutically.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.65-70
• /
• 1992

오래전부터 회전체 질량의 불균형에 의한 진동을 줄이기 위한 전용 밸런싱 장치와 프로그램이 개발되었다[1-5]. 그런데 밸런싱 장치는 센서로부터 측정 된 진동 신호를 이용하여 밸런싱을 함으로 밸런싱의 반복성과 정밀도 등에 따라 그 장치의 성능을 평가할 수 있으며, 국제 표준기구(ISO)에서도 장치의 성능을 평가하기 위한 각종 시험 규격들을 제시, 권장하고 있다[6]. 본 연구 에서는 강성 회전체의 밸런싱을 위해 연구실에서 제작한 탄성 베어링 밸런 싱 장치에 대해 ISO 규격에서 제시하는 성능 평가 시험들을 기초로 회전체 밸런싱과 여러가지 시험을 수행하고 장치의 특징과 성능을 알아보고자 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.4
• /
• pp.19-26
• /
• 2012

For a seismic design or performance evaluation of a structure, an experimental investigation on a scale model of the structure or numerical analysis based on the finite element model is considered. Regarding the numerical analysis, a three-dimensional finite element analysis is performed if a high accuracy of the results is required, while a sensitivity or fragility analysis which uses huge seismic ground motions leads to the use of a lumped-mass stick model. The conventional modeling technique to build the lumped-mass stick model calculates the amount of the lumped mass by considering the geometric shape of the structure, like a tributary area. However, the eigenvalues of the conventional model obtained through such a calculation are normally not the same as those of the actual structure. In order to overcome such a deficiency, in this study, a new lumped mass stick model is proposed. The model is named the "frequency adaptive-lumped-mass stick model." It provides the same eigenvalues and similar dynamic responses as the actual structure. A non-prismatic column is considered as an example, and its natural frequencies as well as the dynamic performance of the new lumped model are compared to those of the full-finite element model. To investigate the damping effect on the new model, 1% to 5% of the critical damping ratio is applied to the model and the corresponding results are also compared to those of the finite element model.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.2
• /
• pp.11-15
• /
• 2011

Heat transfer equation is first reviewed and then governing equation of moisture diffusion. Analogy scheme is applied to analysis the moisture absorption problem of polymers. It make possible to numerically analyze the diffusion problem for single medium by using commercial finite element code if it is under the isothermal loading condition. It is extended to special multimaterial system by introducing pressure ratio function, whose moisture characteristics of materials are proportional to temperature only. The weight changes of silicon-nonconductive-polymer joint model due to moisture absorption is measured and been very close to the numerical results as for single media with boundary condition with zero concentration, but yields numerical errors as for multisystem media.

• Korean Journal of Optics and Photonics
• /
• v.3 no.2
• /
• pp.117-122
• /
• 1992

2-color 3-step resonance photoionization scheme has been used for selective photoionization of mercury isotopes. The levels of $6^3P_1$ and $6^1D_2$ were selected as intermediate excited levels, and the laser wavelengths used were 253.7 nm for the first excitation and 313.2 nm for the second excitation and ionization. Selective excitation for individual isotope was realized in the first excitation step with a single-longitudinal-mode (SLM) dye laser rrf ~700 MHz linewidth. For the second excitation and ionization step, a dye laser with relatively large linewidth of ~5 GHz was used. In this work the effect of laser intensities on isotope selectivity was analyzed from the mass spectra obtained in real time from the time-of-flight mass spectrometer.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.41-48
• /
• 2017

In order to investigate the influence of changes in the thermal properties of solid combustibles on thermal decomposition, a series of solid pyrolysis experiments were performed using a cone calorimeter specified in KS F ISO 5660-1. In the present study, Poly Methyl Methacrylate (PMMA) which does not produce Char during pyrolysis process was used as solid fuel. Results obtained from cone calorimeter experiments were compared to ones obtained from numerical analysis of Fire Dynamics Simulator (FDS) 1D pyrolysis model adopted with thermal properties of solid fuel as input parameters. Comparisons between experimentally calculated and model-predicted mass loss rate were then made to elucidate the effect of changes in the thermal properties on pyrolysis of PMMA.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.1
• /
• pp.75-82
• /
• 2004

With an aim at eliminating the numerical dispersion error arising from the numerical simulation of stress wave propagation, numerical dispersion characteristics of the wave equation based one-dimensional finite element model are analyzed and some dispersion control scheme are proposed in this paper The dispersion analyses are carried out for two types of mass matrix, namely the consistent and the lumped mass matrices. Based on the finding of the analyses, dispersion correction techniques are developed for both the implicit and explicit schemes. For the implicit scheme, either the weighting factor for the spatial derivatives of each time level or the lumping coefficient for mass matrix is adjusted to minimize the numerical dispersion. In the case of the explicit scheme an artificial dispersion term is introduced in the governing equation. The validity of the dispersion correction techniques proposed in this study is demonstrated by comparing the numerical solutions obtained using the Present techniques with the analytical ones.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.685-691
• /
• 2017

In this study, the influence of mass flow rate on the isentropic efficiency of the steam turbine nozzle stage is investigated. A realistic three-dimensional numerical model, which is based on the compressible Navier-Stokes equations, is developed for the steam phase. The comprehensive conservation laws and a kinetic model for steam are investigated. With two different models for the three-dimensional geometry of the nozzle stage, the pressure and temperature distributions, velocity, Mach number. and Markov energy loss coefficient are calculated. A maximum efficiency of 96.66％ is found at a mass flow rate of 0.9 kg/s in model A. In model B, a maximum efficiency of 97.32％ is found at a rate of 1.6 kg/s. It is determined that the isentropic nozzle efficiency increases as the Markov energy loss coefficient decreases through a nearly linear relationship.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.77-83
• /
• 1993

A modified Lanczos method combined with a substructure analysis technique was used for calculating natural frequencies and mode shapes of large structural systems. The method does not require generation and storage of stiffness and mass matrices of the entire structure. It only uses the stiffness and mass matrices of each substucture. No approximating assumptions are required other than the usual assumption of linear elastic system modelled by finite elements. Thus, natural frequencies and mode shapes for the finite element model employed are the same as those with or without the suhstructuring algorithm. To check the efficiency of the proposed method, first ten natural frequencies and the corresponding mode shapes of an open truss helicopter tail-boom structure are calculated by using it.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.10-17
• /
• 2016

This paper presents a laboratory validation of a new approach for Finite Element Model Updating(FEMU) on short-span bridges by combining ambient vibration measurements with static load input-deflection output measurements. The conventional FEMU approach based on modal parameters requires the assumption on the system mass matrix for the eigen-value analysis. The proposed approach doesn't require the assumption and even provides a way to update the mass matrix. The proposed approach consists of two steps: 1) updating the stiffness matrix using the static input-deflection output measurements, and 2) updating the mass matrix using a few lower natural frequencies. For a validation of the proposed approach, Young's modulus of the laboratory model was updated by the proposed approach and compared with the value obtained from strain-stress tests in a Universal Testing Machine. Result of the conventional FEMU was also compared with the result of the proposed approach. It was found that proposed approach successfully estimated the Young's modulus and the mass density reasonably while the conventional FEMU showed a large error when used with higher-modes. In addition, the FE modeling error was discussed.