• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.1-1
• /
• 1995

This paper evaluates the historical development of national park policy and administration in Japan from the perspective of achieving sustainable development in nationally important ecological areas. Contrary to the widely held belief, the national park system in Japan has been unsuccessful in balancing conservation and development. The fundamental reasons for its failure are as follows: the Japan's national park system has been largely founded and developed based on economic grounds and held sway by economic development policy; the policy and administrative coordination between government units concerning conservation and development has not been carried out; public participation and environmental groups' involvement in the decision making have been extremely limited; national parks have been perceived in the public image not as distinctive national heritage but as finest and popular tourist sites; and the dominant interest of tourism and recreational development has prevailed over conservation interest. Japan's unsuccessful experience and lessons imply that there is urgent need to drastically reform our national park system, largely founded on the Japanese model, in order to save our last national environmental heritage.

• Journal of Environmental Science International
• /
• v.4 no.4
• /
• pp.303-315
• /
• 1995

This paper evaluates the historical development of national park policy and administration in Japan from the perspective of achieving sustainable development in nationally important ecological areas. Contrary to the widely held belief, the national park system in Japan has been unsuccessful in balancing conservation and development. The fundamental reasons for its failure are as follows: the Japan's national park system has been largely founded and developed based on economic grounds and held sway by economic development policy; the policy and administrative coordination between government units concerning conservation and development has not been carried out; public participation and environmental groups' involvement in the decision making have been extremely limited; national parks have been perceived in the public image not as distinctive national heritage but as finest and popular tourist sites; and the dominant interest of tourism and recreational development has prevailed over conservation interest. Japan's unsuccessful experience and lessons imply that there is urgent need to drastically reform our national park system, largely founded on the Japanese model, in order to save our last national environmental heritage.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2013

In this paper, we introduce a continuous-time risk model where the surplus follows a diffusion process with positive drift while being subject to two types of claims. We assume that the sizes of both types of claims are exponentially distributed and that type I claims occur more frequently, however, their sizes are smaller than type II claims. We obtain the ruin probability that the level of the surplus becomes negative, by establishing an integro-differential equation for the ruin probability. We also obtain the ruin probabilities caused by each type of claim and the probability that the level of the surplus becomes negative naturally due to the diffusion process. Finally, we illustrate a numerical example to compare the impacts of two types of claim on the ruin probability of the surplus with that of the diffusion process in the risk model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1061-1069
• /
• 2010

In this study, a simplified axisymmetric model is proposed for the problem of compressible internal flow past a microgap. Using numerical and experimental methods, the phenomena of choked flows are observed; these flows are induced by the acceleration of subsonic flows past the narrow cross-section of an annular shape made by a microgap. The relation between mass flow rate and differential pressure is obtained, and by comparing the result with experimental results, the reliability of the numerical results is discussed. The generation of a supersonic jet flow and its diffraction are visualized by performing the numerical analysis of axisymmetric compressible Navier-Stokes equations. This investigation greatly extends the physical understanding of the axisymmetric compressible flow, which has a wide range of engineering applications, e.g., in the case of valves in automotive power systems.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.134-134
• /
• 2001

이동통신 망을 통한 멀티미디어 통신의 수요 급증으로, 차세대 이동통신 시스템에서는 패킷 교환에 기초한 망 구조가 사용될 것으로 예측된다. VOD(Voice Activity Detector)를 갖는 음성 단말은 데이터를 발생시키는 talk spurt(평균이 t$_1$인 지수분포를 따름)와 데이터를 발생시키지 않는 silence period(평균이 t$_2$인 지수분포를 따름)의 두가지 상태를 갖는 마코프 체인으로 모델링된다. Goodman at. al.은 음성 단말들이 talk spurt동안만 데이터를 전송하게 함으로써 더 많은 가입자들을 수용할 수 있는 PRMA(Packet Reservation Multiple Access) 기법을 제안되었다. PRMA 방식에서는 시간 축이 슬롯들로 구성되며 여러개의 슬롯들로 프레임이 형성된다. Silence period 상태에 있던 음성 단말은 talk spurt 상태가 되면 talk spurt의 첫 번째 데이터를 하나의 슬롯을 통해 전송하게 된다. 이때 단말들은 각 슬롯에서 데이터를 전송할 수 있는 확률을 나타내는 채널 접근 확률(channel access probability)에 의해 데이터를 전송하게 되며 전송에 성공하면 슬롯을 예약함으로서 다음 프레임부터는 동일한 위치의 슬롯을 통해 데이터들을 전송하게 된다. DS/CDMA(Direct Sequence/code Division Multiple Access)는 이동통신 단말의 수용 용량상의 이점, 소프트 핸드오버 능력, 보다 용이하게 셀 계획을 세울 수 있는 점 등에 의해 차세대 이동통신 망에서 채택될 예정이다. CDMA 시스템은 간섭(interference)에 의해 용량이 제한을 받게 되며, MAI(Multiple Access Interference)가 시스템의 성능에 많은 영향을 미치게 된다. Brand, et. al.은 간섭의 분산을 줄이기 위해 PRMA 개념을 DS/CDMA 환경으로 확장한 Joint CDMA/PRMA 프로토콜을 제안하였다. 이때 각 슬롯에서의 데이터 전송확률을 그 슬롯에서 예약상태에 있는 음성 단말의 수에 의존하게 하는 방식을 사용하였으며 데이터 전송확률을 나타내는 채널 접근 확률들을 시뮬레이션을 통해 유도하였다. 한편 음성 단말에게는 실시간 서비스를 제공해 주어야 하는 대신 데이터 단말에게는 실시간 서비스를 제공해 주지 않아도 되므로, 트래픽이 많을 때에는 음성 단말의 데이터 전송에 우선권을 주는 것이 바람직하다. 이를 위해서 Brand, et. al.은 채널 접근 확률을 각 슬롯의 트래픽 상태에 따라 적응적으로 산출하는 기법을 제안하였다. 본 연구에서는 Joint CDMA/PRMA의 성능이 채널 접근 함수의 효율성에 많이 의존하게 되므로 보다 효율적인 채널 접근 확률을 구하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.213-220
• /
• 1994

This study was conducted to investigate bird community and to suggest a proper way how to manage and protect bird community in Tokyusan National Park. The survey was carried over 2 main trail districts by line transect method at 20, February and 22, July in 1993. The observed birds were belong to 5 orders 17 families 34 species, they also have Sparrow Hawk Accipiter nisus, Kestrel Falco tinunnculus(natural monument no. 323), White-backed Woodpecker Dendrocopos leucotos(R) and Japanese Waxwing Bombycilla japonica(R). It is estimated that grass region above 1,000m altitude provided breeding habitats for Gray-headed Bunting Emberiza fucata in summer and wintering habitats for Rosy Finch Leucosticte arctoa in winter, This shows that this region should be protected for inhabitation of these birds. Mujukucheontong valley of Tokyusan National Park, which had been a good habitat for valley-inhabituating birds before twenty years ago, has a lower species richness by increasing using density, and so this valley shoud be properly managed urgently.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.107-115
• /
• 1999

In order to develop a convenient method for the estimation of transport distance of settling stones in quiescent water or flowing water, introduced was the simple but relatively accurate equation of drag coefficient. The equation of drag coefficient introduced was confirmed to give relatively accurate evaluation for the drag force of smooth-surface sphere, and the effects of surface roughness and shape can be considered by adjusting empirical parameters. A theoretical equation has been developed for the settling velocity or settling distance of smooth-surface sphere in quiescent fluid, and the computation results have been obtained by adjusting the empirical parameter for the settling distance of stone in quiescent water. The 2nd order ordinary differential equation has been developed for the case of settling stones in flowing fluid, and a numerical model has been developed by using Runge-Kutta method for its solution. A number of cases have been tested by adjusting the empirical parameter.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.213-223
• /
• 1997

Calculation of elastic wave fields has important applications in a variety of engineering fields including NDE (Non-destructive evaluation). Scattering problems have been investigated by numerous authors with different solution schemes. For simple geometries of the scatterers (e.g., cylinders or spheres), the analysis of steady-state elastic wave scattering has been carried out using analytical techniques. For arbitrary geometries and multiple inclusions, numerical methods have been developed. Special finite element methods, e.g., the infinite element method and a hybrid method called the Global-Local finite element method have also been developed for this purpose. Recently, the boundary integral equation method has been used successfully to solve scattering problems. In this paper, a volume integral equation method (VIEM) is proposed as a new numerical solution scheme for the solution of general elasto-dynamic problems in unbounded solids containing multiple inclusions and voids or cracks. A boundary integral equation method (BIEM) is also presented for elastic wave scattering problems. The relative advantage of the volume and boundary integral equation methods for solving scattering problems is discussed.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.341-346
• /
• 2012

Injection molding is one of the widely used polymer processing operations. It is being used for not only conventional injection molding but gas injection molding, water injection molding, and injection compression molding. Injection compression molding involves injection and compression operation, and it gives uniform physical property and high dimensional quality of product. In this study, injection compression characteristics for various product shapes have been investigated by computer simulation. Product containing side wall showed not much effective in injection compression molding since wall thickness direction was perpendicular to the compression direction. Uniform and low shrinkage was observed in injection compression molding comparing conventional injection molding. Subsequently injection compression molding can be used for molding precise product. Optimal injection compression molding condition was obtained using design of experiment for plastic lens and the results were compared with conventional injection molding.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.116-127
• /
• 1999

Line heating is a method widely used in forming ship hull surface. From the viewpoint of mechanics it is large deformation thermal elasto-plastic problem of arbitrary shaped plate. Many researches have been carried out to resolve this problem. Especially, Jang et al.[1] proposed a simplified thermal elasto-plastic analysis method to predict effectively the deformation of plate due to line heating. In this paper, we improved the method of Jang et al.[1] by considering tension yielding in temperature decreasing stage and verified with experimental results. FEA program using MITC4 degenerated shell element was made to deal with elastic large deformation problem. The newly proposed method can be used in the simulation and control of forming hull surface for higher productivity with simplicity and efficiency.