• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.77-82
• /
• 2007

This study was conducted to clarify the differences in egg-laying characters of Varied tit (Parus varius) as elevation in the Mt. Jirisan. We set up 144 artificial nest-boxes at three sites located in 300, 900, 1400m in elevation and checked egg size, clutch size and first date of egg-laying. At a result, There was no difference in egg size as elevation. But clutch size at high elevation was lower than at low elevation. Also, first date of egg-laying at high elevation was later than at other sites. In this research, we think that difference of clutch size at three sites result from 'individual adjustment hypothesis' and difference of first date of egg-laying have relation to sprouting date of leaves and distribution of insects.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.112-118
• /
• 2004

Recently, development of rare earth permanent magnet with the high remanence, high coercivity allows the design of brushless motors with very high efficiency over a wide speed range. Cogging torque is produced in a permanent magnet by magnetic attraction between the rotor mounted permanent magnet and the stator teeth. It is an undesired effect that contributes to output ripple, vibration, and noise of machine. This cogging torque can be reduced by variation of magnet arc length, airgap length, magnet thickness, shifting the magnetic pole and varying the radial shoe depth and etc. In this paper, some airgap length and magnet arc that reduce cogging torque are found by finite element method(FEM) and Maxwell stress tensor method. The SPM(Surface Permanent Magnet) type of high-power Brushless DC (BLDC) motor is optimized as a sample model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.210-218
• /
• 2010

In order to improve the efficiency of frequency bandwidth, various modulation methods such as QAM and PSK have been widely used, and their variation APSK(Amplitude Phase Shift Keying) type modulation methods were proposed and are being used in some satellite communication systems. In this paper, a new constellation method named as $4L^2$-APSK is proposed, which places symbol points circularly as the existing APSK constellations do, but has different number of points and different distance between adjacent points on each layer. An equation for error probability in AWGN channel is also induced for $4L^2$-APSK. In addition, a new Gaussian noise channel is proposed in which noise variances are in the amplitude and in the phase and the two are not equal, and a method of obtaining error probabilities in this channel is also suggested. The equations for error probabilities are verified by computer simulations, and error probabilities of $4L^2$-APSK and QAM are analyzed and compared in the AWGN channel and the proposed noise channel, respectively.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.117-125
• /
• 2008

Today it is critical for all engineers to have the capability of interacting in teams with members of different background and to meet the challenges that they will encounters in their careers. To satisfy such needs multidisciplinary engineering-design courses are attracting more attentions than ever in the engineering education community. In this paper we analyze abroad cases of engineering interdisciplinary design. And we suggest an activation strategy of engineering interdisciplinary design.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.267-275
• /
• 2009

This paper presents the behavior of column-removed double-span beams in welded steel moment frames and proposes a simplified nonlinear dynamic analysis method for the preliminary evaluation of progressive collapse potential. The nonlinear finite element analysis and the associated analytical study showed that the column gravity load and the beam span-to-depth ratio govern the maximum dynamic deformation demand of the double-span beams. Based on these results, the concept of a collapse spectrum, which describes the relationship between the gravity load parameter and the maximum chord rotation of the double-span beams, was newly proposed. A procedure for the application of the collapse spectrum to multi-story welded steel moment frames was then suggested. The inelastic dynamic finite element analysis results showed that the proposed method gives satisfactory prediction of the nonlinear progressive collapse behavior of welded steel moment frames.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.949-953
• /
• 1999

Because epoxy molding compound(EMC) for semi-conductor encapsulants contains high concentrations of fillers, its flow behaviors are affected much by the concentrations and properties of those fillers. This paper reports the effects of a filler concentration, shape, size, and size distributions on the viscosity behavior of EMC(epoxy/silica). In addition, the prediction of viscosity behavior was performed using the Mooney equation. The maximum packing volume in the Mooney equation was calculated by Ouchiyama's packing model and Taguchi's optimization method, while the shpae factor was determined by fitting the experimental data. The results showed that the Mooney equation predicted the viscosity behavior of EMC very well.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.323-331
• /
• 2012

The importance of corporate social responsibility has been more highlighted recently for the sustainable management of the company. The purpose of this study is to empirically find out if the effects of CSR activities on public corporation are shown as same as they are on the private companies which have been verified in the previous studies. We set 'CSR activities' and 'Brand Image' to the independent variables and 'Corporate favorableness' and 'Purchase intention' to the dependent variables. The empirical analysis results are as follows. We have found that high positive causal relations are shown in 'CSR activities' ${\rightarrow}$ 'Corporate favorableness', 'CSR activities' ${\rightarrow}$ 'Purchase intention' and 'Brand image' ${\rightarrow}$ 'Corporate favorableness', 'Brand image' ${\rightarrow}$ 'Purchase intention'. Therefore just as product related 'Brand image' influences positively on purchase intention, the CSR activities have positive influence on product purchase intention and on the whole corporate image as well.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.169-177
• /
• 2005

This study is to analyze the application of the oyster shells as a substitute fine aggregate of concrete. For this purpose, the fundamental experiments of the composed materials and the variations of the main factors on it were considered and then the variations of workability and strength properties of the specimens with each case were also studied. The experimental results on the properties as construction material showed that the use of oyster shells in concrete would not cause abnormal chemical reactions or lead to the formation of any new objects, the workability and strengths decreased with increase in proportion of oyster shells. The compressive strength of concrete with oyster shells is developed as much as that of normal concrete and the grain size of oyster shells is superior on 3.0~5.0mm and the percentage of substitution of them to fine aggregate about 30% from the properties of concrete with them. The relationship equation between compressive strength and tensile strength is ( ).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.3
• /
• pp.249-256
• /
• 2015

Restorative dental materials have advanced rapidly, with improved physical properties that improve survival rates. Accordingly, various materials can be selected. Amalgam, composite resin, glass-ionomer cement, and preformed stainless steel crowns have all been used widely for the restoration of dental caries in primary molars. The various dental materials used to treat proximal caries in the primary molars have distinct advantages and disadvantages. However, few studies have examined their survival rates. This retrospective study examined the 2-year survival rates of more than 700 class II restorations of proximal caries in primary molars clinically and radiologically according to the type of restoration. The study results should help in the selection of class II restorations for molars, one of the biggest concerns of pediatric dentists.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.65-74
• /
• 2010

In this study, the vibration control effect according to the installation location of the sky-bridge and the difference of natural periods of the connected buildings has been investigated. To this end, 40-story and 50-story building structures connected by a sky-bridge were used as example structures and the equivalent modeling method was used. Boundary nonlinear time history analyses were performed using El Centro and Taft earthquakes to investigate the dynamic behavior of the example structures and vibration control effect of the sky-bridge. Based on numerical results, it has been shown that displacement responses can be effectively controlled as the installation floor of the sky-bridge increases and acceleration responses can be effectively reduced when the sky-bridge is installed on the mid-stories of the example building.