• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.60-67
• /
• 1990

This paper proposes a model-based fault detection method for linear/nonlinear system having modelling errors, nonlinearities and measurement noise. The system model is represented by the unified operator [5] in order to apply to both the continuous-time and discrete-time problems. The fault detection method suggested here accounts for the effects of noise, model mismatch and nonlinearities. Modelling errors are depicted by additive forms and the nominal model denominator is fixed via prior experiments in order to quantify the nucertainty bound on the parameter estima-tion. The least square method is used to estimate the numerator parameters of the nominal model. performance than traditional methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.221-226
• /
• 1995

터빈 익렬, 펌프 익차, 원형 냉각탑, 치차 등과 같이 동일한 형상이 원주 방향으로 반복되어 있는 순환 대칭 구조물의 진동특성을 유한 요소법을 사용하여 해석하는 경우에 전체구조를 모델링하는 대신에 구조물을 동일한 형상의 부분구조로 분할하여 부분구조 한개만을 모델링하고 분할된 경계에서 적절한 경계조건을 부과하여 진동해석을 수행함으로서 컴퓨터 기억용량을 절감시키고 계산시간을 단축할 수 있는 방법이 널리 사용되고 있다. Orris and Petyt[1]는 부분구조의 양쪽 분할 경계면, 즉 연결 경계상에 있는 절점변위의 상관관계를 복소파동전파식을 이용해서 구하여 부분구조의 감소된 복소강성행렬 및 질량행렬을 만들고 실수부와 허수부를 분리하여 유한요소해석을 수행하는 방법을 제안하였다. 유한요소 프로그램 ANSYS[2]에서는 이와 같은 방법을 사용하고 있다. Thomas[3]는 순회 정규모드를 이용하였고, 참고문헌[4]에서는 순회행렬을 이용하였다. 또한 유한요소 프로그램 MSC/NASTRAN[5]에서는 푸리에 급수를 이용하고 유한요소 절점의 위치 및 변위를 원통 좌표계를 표현하여 순환대칭구조물의 유한요소해석을 수행할 수 있도록 되어있다. 본 논문에서는 순환 대칭구조물의 형상의 주기성과 순환성을 고려하여 이산퓨리에 변환을 이용함으로써 순환대칭구조물의 유한요소진동해석을 체계적으로 저용량의 컴퓨터에서 신속하고 정확하게 수행할 수 있는 방법을 제안하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.145-154
• /
• 2024

This study used the discrete element method (DEM) to model the driving process of open-ended piles and investigate the behavior of soil plug during pile penetration. The developed DEM model was verified by comparing model pile test results and numerical analysis, particularly using a contact model considering rolling resistance between soil particles. The study successfully simulated soil compression inside the pile by adjusting the relative density and penetration velocity, and it was confirmed that the soil plug tended to be more compressed as the initial penetration velocity decreased. Soil plug length measurements, plug length ratio, and incremental filling ratio were analyzed and validated against experimental results. The developed DEM model aims to reduce trial and error in further studies by detailing the modeling and verification process.

• The KIPS Transactions:PartD
• /
• v.13D no.1 s.104
• /
• pp.117-124
• /
• 2006

Hardware and software codesign framework called PeaCE(Ptolemy extension as a Codesign Environment) was developed. It allows to express both data flow and control flow which is described as fFSM which extends traditional finite state machine. While the fFSM model provides lots of syntactic constructs for describing control flow, it has a lack of their formality and then difficulties in verifying the specification. In order to define the formal semantics of the fFSM, in this paper, firstly the hierarchical structure in the model is flattened and then the step semantics is defined. As a result, some important bugs such as race condition, ambiguous transition, and circulartransition can be formally detected in the model.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.70-76
• /
• 1999

Because of the tight pollution control of $SO_2$ emission, sulfuric acid manufacturers have been interested in the operation with the highest possible conversion efficiency. In this work, the design criteria and operating conditions of the catalytic converter were investigated for maximum conversion efficiency and minimum $SO_2$ emission by parametric analysis and process optimization for the existing acid plants. The Double Converter/Double Absorber(DC/DA) process was investigated by varying $SO_2$ compositions of feed gas, pressures and temperatures of layers of the converter and the depth of the catalyst beds. In order to evaluate the process, a computer simulator for sulfuric acid plants has been developed. The results by process optimization could be used for the converter design and operating conditions with highest conversion efficiency.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.63-66
• /
• 2011

하이브리드 시스템은 연속적인 행위와 이산적인 행위가 긴밀하게 통합되어 있는 시스템이다. 하이브리드 시스템을 모델링 하기 위해서 본 논문에서는 확장한 CHARON을 사용한다. 확장한 CHARON은 기존의 CHARON에서 변수의 도식적 표기법, 모드의 도식적 표기법, 통신 방식 변경(Renaming 방식 제거), 통신과 계층 간 연계의 분리, 긴급 전이 추가, 신호 변수를 추가하였다. 또한 확장한 CHARON을 사용하여 전장을 모델링 하였다.

• Geophysics and Geophysical Exploration
• /
• v.5 no.2
• /
• pp.93-98
• /
• 2002

A three dimensional model for the orebody of an operating mine in Korea was constructed by using a program called '3-D Modeler'. The program allows the user to interactively construct a 3-D model of an orebody from its horizontal cross-sections. The 3-D Modeler is easily able to combine and display various spatial data for model construction. The result of modeling is strongly influenced by control points that correlate to the adjacent horizontal cross-sections. The control points are determined by comparing the geometrical shape of the adjacent cross-sections in conjunction with the geological features of the orebody. The resulting model can be evaluated in viewing the constructed object in three dimensional space or more closely evaluated by inspecting the cross-section. The model can iteratively be improved by modifying the shape of the cross-section and by using this new cross-section for the model building.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.241-248
• /
• 2008

The objective of sensitivity analyses is to identify critical variables of structural models and how their variability impacts mechanical response results. The sensitivity analyses have been used as significant basis data for practical applications of measuring and reinforcing fragile building structures. This study presents several sensitivity analysis methods for topological optimum designs of linear elastostatic structural systems. Numerical examples for structural analyses and topological optimum modeling demonstrate the reliability of sensitivities formulated in the present study.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.756-762
• /
• 2009

As nonlinear friction, stick-slip friction in hydraulic actuators are a problem for accuracy and repeatability. Therefore friction compensation has been approached through various control algorithms. A Adaptive discrete time sliding mode tracking controller has been applied in order to compensate the nonlinear friction characteristics in a hydraulic Actuator. Based on the diophantine equation, a new discrete time sliding function is defined and utilized for the control law which includes a friction and modeling error. Robustness is increased by using both a projection algorithm and a sliding function-based nonlinear feedforward. From the results of simulation and experiment good tracking performance is achieved.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.142-151
• /
• 1996

The digital video cassette recorder(DVCR) is considered as next generation VCR due to its performance breakthrough in various aspects, such as digital recording and various digital image processing techniques. The purpose of our study is to understand the standardized specifications of the DVCR system, evaluate the performance of the system, and improve the quality of the reconstructed DVCR image. More specifically, in order to enhance the DVCR Image we consider a series of discrete cosine transform(DCT), quantization, inverse DCT, and Inverse quantization as a degradation process of the Imaging system, and propose a fast adaptive image restoration algorithm for reducing blocking artifacts.