• Resources Recycling
• /
• v.30 no.2
• /
• pp.61-67
• /
• 2021

Scraps are a byproduct of the machining process used for transforming titanium ingots into useful mechanical parts. Scraps take two forms, namely, bulky scraps, which are produced by cutting, and chipped scraps, which are produced by milling. Bulky scraps are comparatively easier to recycle because of their small surface area and less oxygen content; as a result, they pose only a small risk of explosion. In contrast, chipped scraps pose a higher risk of explosion, because of which, their recycling is complicated, resulting in most such scraps being discarded. With the aim of avoiding this waste, we proposed a novel process for converting chipped scraps into stable carbide materials. Methods typically applied to reduce particle size and impair the formation of solid solution type phase in the carbide materials were used to improve the mechanical properties of carbides prepared from chipped scraps. Our novel recycling process reduced carbide production costs and improved carbide quality.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.68-73
• /
• 2019

Ilmenite is one of the principal ores for the production of titanium dioxide. To produce titanium dioxide with purity higher than 99.9% from ilmenite, Ti(IV) should be separated from the dissolved impurities such as Fe(III), Si(IV), and Mn(II) present in ilmenite. In this work, a hydrometallurgical process was investigated to recover pure titanium dioxide from ilmenite by HCl leaching followed by separation and hydrolysis of Ti(IV). An optimum leaching condition was obtained by investigating the effect of HCl concentration, pulp density, and leaching time on the leaching percentage of Ti(IV), Fe(III), Si(IV), and Mn(II). Ammonium hydroxide and sodium hydroxide solutions were employed as neutralizing agents to hydrolyze Ti(IV) from the stripping solution of Ti(IV). Titanium dioxide of the anatase phase was obtained by calcination of the hydrolyzed precipitates with $NH_4OH$ solution. A hydrometallurgical process can be developed to produce pure $TiO_2$ powders from ilmenite.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.192.1-192.1
• /
• 2016

타이타늄은 밸브 메탈의 일종으로, 다양한 전해질 조건에서 양극산화되어 이산화 타이타늄($TiO_2$)을 형성한다. 이산화 타이타늄은 저렴한 가격, 풍부함, 무독성, 높은 안정성 등 다양한 장점을 지닌다. 또한 리튬 이온의 삽입/탈리 이후에도 구조적인 변화가 적은 성질과 비교적 높은 방전 전압(1.0-2.5 V vs Li/Li+)으로 인해 그래파이트를 대체할 리튬이온 전지의 전극재료로써 연구되어 왔다. 하지만 낮은 이온 및 전기 전도도로 인해 다양한 분야에서의 활용에 한계가 있어왔다. 이러한 한계 극복을 위해, 이산화 타이타늄에 전도성이 높은 탄소 계열의 물질을 코팅하는 방법이 고려되었다. 그래핀 산화물은 강한 산을 이용하여 그래파이트를 산화시킨 물질로, 많은 산소작용기를 함유하고 있어 탄소 고유의 전기전도성을 갖지 못한다. 환원 그래핀 산화물(reduced graphene oxide)는 빛, 열, 화학 작용울 통해 그래핀 옥사이드를 환원시켜 산소작용기를 없앤 물질로, 환원과정에서 전기전도성을 회복한다. 이에 본 연구에서는 이산화 타이타늄에 환원 그래핀 산화물(reduced graphene oxide)를 코팅하여 전기 전도도를 향상시키고. 이에 대한 활용 분야를 연구하고자 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.120-127
• /
• 2022

Nitrogen oxide(NOx) is a major cause of air pollution, exists in the form of nitrogen monoxide and nitrogen dioxide, and is harmful to the human body. Recently, a number of studies to reduce NOx in the atmosphere have been conducted, and these efforts have been the same in the field of construction materials. It is known that NOx can be efficiently removed by using a photocatalytic reaction. In this study, the NOx removal performance of the foam composite using activated carbon(AC) and titanium dioxide(TiO₂) was investigated. AC was used to enhance the photocatalytic reaction of TiO₂ by increasing the internal specific surface area of the foam composite. In this study, foam composites were prepared using the substitution rate of AC as the main variable. The NOx removal performance of specimen was evaluated according to the test method presented in ISO-22197-1. The specific surface area of the foam composite showed a tendency to increase according to the AC content, but decreased at 15% or more. Also, when the AC substitution rate was 15%, the NOx removal efficiency was the highest.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.64-74
• /
• 2016

Titanium and iron are closely related in nature, although titanium is the ninth most abundant element in the Earth's crust. Iron in titanium ores must be removed for use as feedstocks in the manufacture of titanium dioxide pigments and pure $TiCl_4$ for metal titanium. In this study, various beneficiation processes of ilmenite for production of $TiO_2$ have been reviewed and compared. Most of these processes involve a combination of pyrometallurgy and hydrometallurgy. These beneficiation processes of ilmenite generate considerable quantities of wastes primarily in the form of iron salt, iron oxide and acidic effluents. Therefore, it is important that recovery of acid value from waste and conversion of iron bearing waste to useful materials for development of new beneficiation processes of ilmenite.

• Korean Journal of Metals and Materials
• /
• v.47 no.3
• /
• pp.182-187
• /
• 2009

The molten salt electrolysis is applied to reduce titanium dioxide to titanium metal using calcium chloride as an electrolyte and the reaction mechanism of the reduction process is examined by analyzing the reaction products. The process conditions to obtain titanium metal for $900^{\circ}C$ correspond to 2.9~3.2 V and 24 hours. The reaction products for 2.9 V at $900^{\circ}C$ include irregular-shaped titanium oxides such as $Ti_4O_7$, $Ti_3O_5$ and $Ti_2O_3$ and polyhedral $CaTiO_3$. Using these microstructure analysis, the sequential reaction mechanism for the electrochemical reduction of titanium dioxide to titanium is proposed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.307-311
• /
• 2002

This study was investigated the photoelectrochemical behavior of STS304 steel with $TiO_2$ thin films coating, applied by sol-gel method, for the purpose of cathodic photoprotection of the steel corrosion. One time $TiO_2$-coated STS304 steel adopted two kinds of $TiO_2$ sol solution has the most dominant photopotential abilities, which was -200mV vs. SCE and -500mV vs. SCE under illumination with 40W fluorescent lamp, respectively. That was more negative than the corrosion potential of the bare metal(-150 mV). The bleaching of TCE was confirmed on $TiO_2$-coated STS304 under UV-illumination with 20 W Black-light. This Study was concluded that $TiO_2$-coated STS304 exhibited both a cathodic photoprotection effect against corrosion and photocatalytic self-cleaning effect.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.137-138
• /
• 2013

나노입자에 의한 세라믹 코팅은 제품의 방청, 내식, 내마모성을 향상시킬 뿐만 아니라 내열성을 향상시키는 데에도 효과적인 성능을 보이고 있다. 특히 지르코니아(YSZ), 산화알루미늄($Al_2O_3$), 이산화 타이타늄($TiO_2$) 등과 같이 차열 성능이 우수한 세라믹 계열을 이용한 TBC(Thermal Barrier Coating)은 이미 항공기 엔진부품이나 고성능 베어링과 같이 고온에서도 우수한 성능을 유지해야 하는 기계부품에 보편적으로 사용되어 오고 있는 방법이다. 본 연구에서는 이와 같은 차열서능이 우수한 세라믹 소재를 이용해 건축물에 많이 사용되고 있는 목재에 난연성능의 향상을 목적으로 세라믹 나노코팅을 하였을 때 목재의 연소특성이 어떻게 변화하는가를 관찰 및 분석하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.447-452
• /
• 2017

A $Pd/TiO_2$ catalyst was prepared by a conventional impregnation method, and further characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. The as-prepared material was employed to accelerate dehydrogenation of potassium formate in the presence of light at different temperatures. The $Pd/TiO_2$ catalyst showed distinct dehydrogenation activities, and particularly, the material exhibited a higher turnover frequency (TOF) of $2,097h^{-1}$ at $80^{\circ}C$ after 10 minutes in the presence of light compared to that (TOF of $1,477h^{-1}$) obtained in the absence of light. Numerous analytical techniques suggest that the increased dehydrogenation activity likely originates from light-excited electron and hole at the photocatalyst, i.e., $TiO_2$, in conjunction with metal-support interaction.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.343-347
• /
• 2022

Recently, the problem of global warming caused by greenhouse gases is getting serious due to the development of industry and the increase in transportation means. Accordingly, the need for a technology to reduce carbon dioxide, which accounts for most of the greenhouse gas, is increasing. Among them, a catalyst for converting carbon dioxide into fuel is being actively studied. Catalysts for reducing carbon dioxide are classified into thermal catalysts and photocatalysts. In particular, the photocatalyst has the advantage that carbon dioxide can be reduced only by irradiating ultraviolet rays at room temperature without high temperature or additional gas. TiO₂ is widely used as a photocatalyst because it is non-toxic and has high stability, but has a disadvantage of low carbon dioxide reduction efficiency. To increase the reduction efficiency, 1-propanol was used in the synthesis process. This prevents agglomeration of the catalyst and increases the specific surface area and pores of TiO₂, thereby increasing the surface area in contact with carbon dioxide. As a result of measuring the CO₂ reduction efficiency, it was confirmed that the efficiency of TiO₂ with 1-propanol and TiO₂ without 1-propanol was 19% and 12.3%, respectively, and the former showed a 1.5 times improved efficiency.