• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.57-64
• /
• 2022

Additional dentition images are needed because the dentitions are distorted in cone-beam computed tomography (CBCT) due to streak artifacts and non-uniformity of the x-ray beam. The purpose of this study is to evaluate the feasibility of improving the dentition image of CBCT scan with intraoral scanner instead of plaster models. Maxilla images from plaster models, two intraoral scanners, and CBCT of 20 patients aged 12 to 18 were used in this study. With one of the intraoral scanners, the full arch was scanned by three segments and combined into a complete full arch. Virtual skull-dentition hybrid images from intraoral scanners were superimposed with the images from plaster models to evaluate the coordinate value difference and distance at reference points. The results showed that the coordinate value difference and distance were smallest with segmented intraoral scan, which showed only 2 ㎛ distance. Intraoral scan may provide good dentition images for virtual skull-dentition images.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.104-115
• /
• 2018

Purpose: The purpose of this study is to evaluate the image acquisition ability of intraoral scanners by analyzing the comprehensiveness of scanned images from standardized model, and to identify problems of the model. Materials and Methods: Cast models and 3D-printed models were prepared according to international standards set by ISO12836 and ANSI/ADA no. 132, which were then scanned by model scanner and two different intraoral scanners (TRIOS3 and CS3500). The image acquisition performance of the scanners was classified into three grades, and the study was repeated with varying surface conditions of the models. Results: Model scanner produced the most accurate images in all models. Meanwhile, CS3500 showed good image reproducibility for angled structures and TRIOS3 showed good image reproducibility for rounded structures. As for model ingredients, improved plaster model best reproduced scan images regardless of the type of scanner used. When limited to 3D-printed model, powdered surface condition resulted in higher image quality. Conclusion: When scanning structures beyond FOV (field of view) in standardized models (following ISO12836 and ANSI/ADA 132), lack of reference points to help distinguish different faces confuses the scanning and matching process, resulting in inaccurate display of images. These results imply the need to develop a new standard model not confined to simple pattern repetition and symmetric structure.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.84-85
• /
• 2002

웹을 통해 보여지는 대부분의 이미지는 스캐너와 같은 입력 장치에 의해 이뤄진다. 그러나 모니터로 보여지는 이미지의 색과 실제 색의 차이로 인한 문제가 나타나면서 색보정에 대한 관심이 증대되고 있다. 디지털 환경에서의 색상 차이는 같은 이미지라도 디지털 장치에서 입력되고 출력되는 값이 비 선형적이기 때문에 나타난다. 이에 본 연구는 스캐너에서 출력되는 디지털 값으로부터 실제색의 삼자극치를 예측하여 이를sRGB 규격으로 캘리브레이션 된 모니터로 정확하게 재현시키는 기술을 연구하였다. (중략)

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.571-575
• /
• 2004

인쇄회로기판(PCB)을 조립 또는 검사하는 장비의 작업 프로그램 작성을 위해서는, 납땜 패드의 위치와 크기에 대한 데이터가 필요하다. CAD 파일, 거버 파일 등을 사용하여 패드를 추출하는 방법이 많이 사용되고 있으나, 본 논문은 이미지 스캐너를 사용하여 추출하는 방법을 새로이 제안한다. 제안된 방법은 통계적 영상 처리를 적용하여, 기존의 일반적인 영상처리 방식보다 기판 별 패드 색상의 차이에 강인하다. 실제 PCB 에 대한 실험을 통하여 제안 방법의 성능을 검증한다. 제시된 방법은, CAD 파일과 거버 파일의 확보가 어려운 임가공 업체 등의 생산현장에서 사용될 수 있다.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.858-861
• /
• 2018

In this paper, we propose the development of a small $360^{\circ}$ oral scanner lens module. The proposed small $360^{\circ}$ oral scanner lens module consists of a small $360^{\circ}$ high resolution(4MegaPixel) lens optical system, a 15mm image sensor unit, and a small $360^{\circ}$ mouth scanner lens external shape. A small $360^{\circ}$ high resolution lens optical system produces a total of nine lenses, the outer diameter of the lens not less than 15mm for use by children through the ages of adulthood. Light drawn by a small $360^{\circ}$ high resolution lens optical system is $90^{\circ}$ flexion so that image images are delivered to image sensors. The 15mm image sensor unit sends the converted value to the ISP(Image Signal Processor) of the embedded board after an image array through the column and the row address of the image sensor. The small $360^{\circ}$ mouth scanner lens outer shape was designed to fix the race to the developed lens. Results from authorized testing agencies to assess the performance of proposed small $360^{\circ}$ oral scanner lens modules, The optical resolving power of $360^{\circ}$ lens was more than 30% at 150 cycles/mm, $360^{\circ}$ lens angle was $360^{\circ}$ in vertical direction, $42^{\circ}{\sim}85^{\circ}$ in vertical direction, and lens distortion rate was 5% or less. It produced the same result as the world's highest level.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.82-83
• /
• 2003

PC의 대량 보급과 인터넷 케이블 망의 전지역적 구축을 통해 디지털 정보의 교류가 활발히 이루어지고 있다. 이에 따라 아날로그 이미지를 디지털화 하는 디지털 카메라나 스캐너와 같은 이미지 입력 장치와, 디지털 이미지를 눈으로 볼 수 있게 하는 모니터나 프린터와 같은 이미지 출력 장치로 구성되는 디지털 이미징 장치들의 사용이 일상화되고 있다. TV나 컴퓨터 모니터를 통한 인터넷 상품 구매는 이미 보편화되어 있고, 스캐너를 사용하여 사진을 스캔하여 수정이나 합성 등의 편집을 한 후 이미지를 웹에 올리거나 사진 프린터로 다시 뽑는 일에도 익숙해져 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.122-123
• /
• 2003

색은 정보이다. 그러므로 다양한 매체를 통해 색을 정확하게 재현하기 위해서는 객관적인 색의 표시가 요구된다. 일반적으로 정확한 색표시를 위해서는 측색 기기를 사용해야 한다. 그러나 측색 기기는 가격이 비싸고 기기를 운용하는 전문적인 지식이 필요하다. 뿐만 아니라, 측정 면적의 한계로 이미지 속의 좁은 면적을 차지하는 색들은 측정이 불가능하다 본 연구는 널리 사용되고 있는 사무용 스캐너를 사용한 색측정 기술에 관한 것이다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.301-310
• /
• 2013

For analyzing sand grain size, a specialized high-priced instrument has been used, such as sieve shaker, video camera, laser particle size analyzer, and microscope. Among these, the sieve shaker is commonly used because it is not only cheaper than others but also provides reasonable accuracy. However, it takes a long time and makes lots of dust and noise. In this study, a cheaper and easier method which can replace the sieve shaker is proposed. By using a commercial flat-bed scanner and a darkroom box, the sand size distribution can be analyzed. The darkroom box makes sand images clear and protects the glass of the scanner from being scratched. Comparison between the present method and sieve analysis shows that the present method not only has an accuracy comparable to the sieve analysis but also can save time and effort.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.473-479
• /
• 2003

The purpose of this study is to recover the CIE XYZ tristimulus values of original colors from scanner output signals, and to reproduce true colors on the monitor. The process of this study is composed of three steps; scanner characterization, chromatic adaptation transformation, and color space transformation between and sRGB. Especially, in the process of recovery, scanner stimuli were obtained accurately by dividing the non-linear photometric response curve into two parts. As the result of test to EPSON Expression 1680 scanner, the average color difference between true and recovered XYZ for 228 target colors, 22 test neutrals, and 36 test colors were 1.49, 0.97, and 1.42 $\Delta$ $E_{UV}$ *, respectively. With the transformation from illuminant D50 to illuminant D65, the input signals to sRGB monitor were predicted. Finally, it could be found that displayed colors with predicted input signals were very consistent with true colors. with true colors.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.149-152
• /
• 2000

A scanner is an output device that scans documents, photographs, films etc, and convert them to digital data. Especially, a film scanner is used for scanning negative/positive films. In this paper, we design step motor control part, image sensor part, and Aか converter part which are components of the scanner and use DSP for fast signal processing. We also design the interface circuits using EPLD between these peripherals and DSP. The PC interface circuits between scanner and PC are designed by using parallel port to control and transfer the scanned data from scanner to PC. For 35mm film, we design hardwares which obtain high resolution more than 9 million pixels (horizontal resolution is 3835 and vertical resolution is 2592).