• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2020

As various communication services have emerged due to the development of mobile communication technology, there is a need for a wideband antenna supporting multiple communication services with one antenna. In this paper, we propose a planar slot wideband antenna that can support all the communication services of 3.1~4.99GHz, the low frequency band of 5G, in addition to the existing communication services such as WiFi, LTE 2300/2500, and WiMAX. Through the simulation, the optimized antenna design parameters were obtained, and the antenna was fabricated to implement an antenna with a frequency bandwidth of 1.96~6.01GHz (S11 <-10dB) and presented the radiation pattern and gain of the antenna. The proposed antenna is a multi-band antenna that can provide all the services of LTE, Wifi, WiMAX, and 5G low frequency bands. It can be used as a repeater antenna in radio shadow area such as buildings, dense areas, and ships.

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.184-203
• /
• 2013

This study analyzes the variability of Korean summer rainfall associated with the tropical low-frequency oscillation using long-term observation data. From the EOF analysis, the first mode showed opposite phase between the South and the North Korea with the regime shift in rainfall variability since the mid-1990s. The summer precipitation over South Korea tends to increase in southern part during strong El Ni$\tilde{n}$o where the warm sea surface temperature extends to far eastern tropical Pacific. In weak La Ni$\tilde{n}$a, the increased precipitation directly influences from the western tropical Pacific to the mid-latitude. In June, the rainfall over South Korea is positively correlated with the Indian Summer Monsoon while in July, it is negatively correlated with the Western North Pacific Summer Monsoon. In August, highly negative correlation between the rainfall over South Korea and the Indian Summer Monsoon is found.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.55-64
• /
• 2007

This paper represents characteristics and design example of series loaded LCC type high frequency resonant DC-DC converter with variable parallel capacitor in the secondary side of inductive power transformer. In this converter, ZVS(zero voltage switching) technique is applied to reduce turn-off switching losses, and the applied converter used the PFM switching pattern to control output voltage. The operating characteristics of the proposed converter is analyzed using nomalized parameter such as switching frequency and load factor with varing the secondary parallel resonant capacitor. The results of analysis show the operating characteristics and design method of the proposed converter using characteristic values. And the proposed converter can be applied for the contactless power supply with linear transfer system such as dean room facilities of semiconductor and Flat Panel Display.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.407-409
• /
• 2017

Many traditional retailers are losing money due to loss and accidents in managing their carts. Therefore, we intend to solve these problems by installing a raspberry pie with various functions in order to efficiently manage the cart. First, use ultrasonic sensors to measure the distance between the cart and the object, use vibration sensors to vary the number of vibration sensors, change the number of vibrations to the user, and use Beacon to transmit the cart in real time. It also contributes to consumers' spending patterns and revenue generation by identifying consumers' consumption patterns. Problems with lost are also resolved by issuing an audible warning (outside of Mart) if a distance is removed (outside of Mart).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2010

In-Wheel System is a high-efficiency system to supply a new concept of platform which raises the efficiency of motor drive system and applies it to an environment-friendly automobile by installing a highly efficient electric motor directly to wheels and removing factors of power train. The proliferation of these systems is directly related to the safety of our lives, so check the reliability of the part in the development phase and should be certified. Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This paper presents to the verification methods for durability, one of reliability assessments of the Motor, the study calculated acceleration and deceleration torque and the effective torque from driving conditions of In-Wheel Motor, and based on this, it reduced the test time and suggested the verification methods of In-Wheel Motor reliability through the accelerated life test.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.77-82
• /
• 2013

Looking at the recent value change of users and the usage pattern of network users, it is changing from simple web information, one-way information acquisition and data transmission to increase of usage of multimedia, increasing demand for security and customization, and increasing demands for free mobility. Due to this change of demand, the services which were provided individually, developed into a form which is merged, the network also seems to develop into the combined network from the individual network for individual service, and the communication network control technology which is the core technology is also rapidly developing.. This paper propose three path computation scheme that not only use the resources effectively but also to minimize the information transmissions between the multi-layers in a multi-domain environment. This paper also suggested that the optimum path choice be performed through diversification of the path selection using the information of various layers altogether in the multi-layer environment, compared with the established path selection method when the path was selected using the information of each layers.

• Clean Technology
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2012

Cleaning procedure of solar silicon wafer, following ingot sawing process in solar cell production is studied. Types of solar silicon wafer can be divided into monocrystalline or multicrystalline, and slurry sawn wafer or diamond sawn wafer according to the ingot growing methods and the sawing methods, respectively. Wafer surface and contaminants can vary with these methods. The characterisitics of contaminants and wafer surface are investigated for each cleaning substrate, and appropriate cleaning agents are developed. Physical properties and cleaning ability of the cleaning agents are evaluated in order to verify the application in the industry. The wafers cleaned with the cleaning agents do not show any residual contaminants when analyzed by XPS and regular patterns are formed after texturization. Furthermore, the cleaning agents are applied in the production industry, which shows superior cleaning results compared to the existing cleaning agents.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1631-1636
• /
• 2010

In this study, we demonstrate a nano-scale lithograph obtained on localized (100) silicon (p-type) surface using by modified AFM (Atomic force microscope) apparatuses and by adopting controlling methods. AFM-based experimental apparatuses are connected to a customized pulse generator that supplies electricity between the conductive tip and the silicon surface, while maintaining a constant humidity throughout the lithography process. The pulse durations are controlled according to various experimental conditions. The electrochemical reaction induced by the pulses occurs in the gap between the conductive tip and silicon surface and result in the formation of nanoscale oxide particles. Oxide particles with various heights and widths can be created by AFM surface modification; the size of the oxide particle depends on the pulse durations and the applied electrical conditions under a humid environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.219-228
• /
• 2010

A two-dimensional mathematical model was developed to predict the temperature and moisture-content profiles of a tumble dryer during infrared drying. The model is based on the movements of liquid water and moisture in the object and on the fluid and heat transfer in the drying air. The model was solved by the finite volume analysis for the fluid, temperature, and radiation intensity fields. After deriving the governing equations and developing the two-dimensional tumble dryer models, numerical investigations were carried out to examine the effects of various parameters such as the heater temperature and the heating patterns on the drying mechanism of the tumble dryer. All the results show that the drying time can be reduced by using the IR heater.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.27-37
• /
• 2001

The design, fabrication, and an experimental implementation of the strip patch antenna coupled with a H-shaped aperture arc presented in this paper. The proposed antenna has the wide bandwidth, high gain, and low cross-polarization levels. We measured the VSWR, smith chart impedance characteristic, co/cross polarization pattern, gain, and so on. The measured bandwidth of this antenna is 47.1 %. To reduce the back lobe and increase the gain, when the reflector is used, cross polarization level is below -18.2dB at E-plane and below 25.7 dB at H -plane. The maximum gain at 2.05 GHz is also 10.4 dBi and the 3 dB gain bandwidth with center frequency at 2.17 GHz is 24 %, which is the wide bandwidth. This antenna can find applications in mobile communication, wireless LAN, RF communication system, and so on.