• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.112-119
• /
• 2009

This paper presents a PLL(Phase Lock Loop) approach for effective speed and torque control of high speed miniature BLDCM(Brushless DC Motor) using hall sensor. The proposed speed control method based on PLL uses only a phase shift between reference pulse signal according to speed reference and actual pulse signal from hall sensor. It doesn't use any speed calculation, and calculates a direct current reference from phase shift. The current reference is changed to reduce the phase shift between reference and actual pulse. So the actual speed can keep the reference speed. The proposed control scheme is very simple but effective speed control is possible. In order to obtain a smooth torque production, the reference current is changed using acceleration and deceleration slope. The proposed control scheme is verified by experimental results of the 50W, 40,000[rpm] high speed miniature BLDCM.

• Convergence Security Journal
• /
• v.10 no.3
• /
• pp.51-60
• /
• 2010

The expansion of internet technology has made convenience. On the one hand various malicious code is produced. The number of malicious codes occurrence has dramadically increasing, and new or variant malicious code circulation very serious, So it is time to require analysis about malicious code. About malicious code require set criteria for judgment, malicious code taxonomy using Algorithm of weakness difficult to new or variant malicious code taxonomy but already discovered malicious code taxonomy is effective. Therefore this paper of object is various malicious code analysis besides new or variant malicious code type or form deduction using visualization of strong. Thus this paper proposes a malicious code analysis and grouping method using visualization.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.71-76
• /
• 2004

A compact embedded tapped-line combline filter with interdigital capacitors using low temperature co-fired ceramic (LTCC) technology for wireless application is proposed. Also, in-situ measurement using T-pattern microstrip resonator was performed to acquire exact knowledge of electrical properties of the LTCC substrate. The proposed filter makes it possible to realize a relatively small size, 2.7mm${\times}$2.03mm. by employing interdigital and combline structure. It shows 1.8 ㏈ insertion loss, 37.6㏈ return loss, and 280 MHz bandwidth at the center frequency of 5.09 GHz. Its small size and simple structure make it a good candidate as an integrated filter for various LTCC substrates.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.101-108
• /
• 2008

Residual stress is one of the causes which make defects in engineering components and materials. Many methods have been developing to measure the residual stress. Though these methods provide the information of the residual stress, they also have disadvantage like a little damage, time consumption, etc. In this paper, we devised a new experimental technique to measure residual stress in materials with a combination of laser speckle pattern interferometry and spot heating. The speckle pattern interferometer measures in-plane deformation during the heat provides for much localized stress relief. 3-D shape is used for determining heat temperature and other parameters. The residual stresses are determined by the amount of strain that is measured subsequent to the heat and cool-down of the region being interrogated. A simple model is presented to provide a description of the method. In this paper, we could experimentally confirm that residual stress can be measured by using laser interferometry and spot heating method.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.1-7
• /
• 2014

The microgrid system is the combination of photovoltaic(PV) array, load, and battery energy storage system. The control strategies were defined as multi-modes of operation, including rest operation without use of battery, power charging, and power discharging, which enables grid connected mode or islanded mode. Photovoltaic power is a problem of the uniformity of power quality because the power generated from solar light is very sensitive to variation of insolation and duration of sunshine. As a solution to the above problem, energy storage system(ESS) is considered generally. There fore, in this study, we did basic research activities about optimization method of the amount of energy used, using a smart microgrid test-bed constructed in building. First, we analyzed the daily, monthly and period energy pattern amount of power energy used, and analyzed PV power generation level which is built on the roof. Utilizing building energy pattern analysis data, we was studied an efficient method of employing the ESS about building power consumption pattern and PV generation.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.455-461
• /
• 2010

We have identified which causes have influenced to accidents, case by case through a relational analysis on data of accidental case, root case, accident cause and hazard. The data on the accident of railway operation and system have been analyzed and the root cause, accident cause and hazard have been classified. This research has developed accident cause analysis system to build efficient railway safety policy which will be used to prevent railway accidents by government and railway operator.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.103-110
• /
• 2016

This study aims to estimate the species, size and shape of fish using a non-contact 3 dimensional pattern laser so that this preliminary test was carried out to understand the structural feature and length of goldfish according to water turbidity and depth in the aquacultural tank. 3-D pattern laser could clearly detect its morphological shape except the caudal fin due to soft tissue. Since the sensing strength of line laser light according to depth has sufficient power, it is possible to measure its depth and structural feature in the detected range. The result showed that the measured error of individual's fork length was less than ${\pm}1%$ in the water using 3-D pattern laser, when compared with the measured value in the air.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.65-71
• /
• 2011

In modem society, car are the most important transportation. Thereby, car accidents has been increasing steadily. The driver is the biggest factor of car accident. Therefor, various studies about driver (reaction time, mentality, physiological signal, age, pattern of drive) are underway. In this paper, we design a embedded system for measuring the reaction time by driving skill. The proposed system is composed of measuring brake module, OBD-2 scanner and bluetooth transmission module. Also, we implement GUI program to analyze experiment result and database to store results. Though our proposed system, we can analyze driving skill.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.808-816
• /
• 2016

In this paper, a new technique and cost function which can be to classify jamming signal and target signal from the spectral distribution of received signal in order to minimize the main beam distortion of target signal and to form nulls in the direction of jamming signal in array antennas of single port system is proposed. The proposed cost function is applied to the adaptive algorithm which has the fast convergence and stable nulling performance through the combination of the PSO(Particle Swam Optimization) algorithm and the gradient-based perturbation algorithm, which shows stable nulling performance adaptively even under the moving jamming signal where the incident direction of the jamming signal is changing with time.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1141-1144
• /
• 2005

본 논문은 실내에서 홈 거주자의 위치를 인식하기 위해 근접성을 이용한 위치 추적 시스템 환경을 제안하고자 한다. 이를 위해 기존 실내의 고정된 위치에 있는 구조/시설물 및 가전제품의 ON/OFF 스위치를 이용하며 기타 추가적인 스위치 및 센서를 부착하여 개폐동작이 일어날 때 발생되는 신호를 검출하여 실제위치를 얻는다. 발생되는 신호는 Pull-up 저항을 이용한 신호 검출 방법으로 눌려진 스위치나 센서에서 발생된 아날로그 신호를 검출한다. 검출된 신호의 고유한 ID값은 Sensor TMO로 송신되어 수집된다. 수집된 센서ID는 소켓통신을 이용하여 홈서버인 실내위치추적시스템으로 보내질 뿐아니라 원격 모니터링 GUI를 통해 실내 거주자의 위치를 GUI의 가상공간 좌표와 매핑된 홈 거주자의 위치를 보인다. 본 논문에서 제안한 실내위치추적시스템은 홈 거주자의 위치를 주기적으로 모니터링하고 거주자의 이동 패턴과 활동 상황을 파악하여 헬스케어 정보로 활용할 예정이다.