• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.201-212
• /
• 2021

This study attempted to compare the pattern with the absorption layer by analyzing the pattern of commercially available urinary incontinence panty products. Through this, it tried to obtain basic data necessary for the development of functional urinary incontinence panty for active seniors. Twelve commercially available products were decomposed to analyze size and patterns, and appearance and clothing pressure were evaluated through 3D simulation. As a result of comparing the size and pattern of urinary incontinence panty, it was analyzed that the size difference between parts was large even though the product was called the same. Products from the same brand also showed a big difference depending on design and absorption. As a result of the appearance evaluation for the 3D simulation, it was found that there were significant differences between products in all items such as the front, side, and back. Product No. 9 was analyzed to be the best except for the waist fit on the side. In the evaluation of clothing pressure, most of them were marked in red except for products 1, 2, and 8 due to the nature of the panty product. In the future, it is thought that actual wearing experiments and size standardization studies on urinary incontinence pants should be conducted.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.119-131
• /
• 2021

In this study, I compared the pattern design method of classic shirts focused on the men's clothing consturction textbook. It was intended to select a shirt pattern drawing method suitable for men in their 20s by conducing a appearance evaluation with a 3D simulation program. Pattern drawing method, sizes, appearance evaluation, garment pressure. were evaluated, and SPSS 26.0 program was used for analysis. According to the Pattern drawing method, there were differences in application sizes, and there were many parts where designated sizes were applied. The shirt pattern is mostly the same for the front chest and back chest, front waist and back waist. However, if there is a front and back difference of the chest and the waist circumference, the fit was considered better. B pattern was evaluated as the best in appearance evaluation, color distribution, and mesh condition through 3D simulation, and B pattern was analyzed as the most suitable method for men in their 20s. Since this study applied the average sizes of the 7th Korean Human Body Dimension Survey report in 20s, it is thought that caution should be paid to apply them to all 20s. In the future, it is also thought that research on the actual fit and patterns of various body types and materials in their 20s should be carried out.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.95-107
• /
• 2022

This study attempted to develop a bodice prototype suitable for the 20's obese male's trunk with a BMI of 25kg/m² or more, which is distinguished from the standard body type. Through this, it was intended to provide data to help the development of clothing for obese males. Patterns such as front bodice shoulder line and front sagging were modified through primary appearance and garment pressure evaluation. Through the second evaluation, corrections such as back armhole, back waistline, and front sagging were performed. Through the third evaluation, the final pattern drafting method was developed by removing the front sagging added through the second evaluation. In the case of obese male body types in their 20s, a drafting method distinguished from the standard body type was required in the method of setting the front and back waist lines, back armhole darts, and front shoulder lines due to protruding and posture of the abdomen. This study was meaningful in that it presented a bodice prototype drafting method suitable for the 20s obese males. In the follow-up study, it is thought that actual clothing experiments and studies to develop clothing patterns by applying them to obese male tops in their 20s should be conducted.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.117-126
• /
• 2020

In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1690-1696
• /
• 2006

The purpose of this study is to provide the basic data useful in designing apparel patterns for aged abdominal obese women. The body measurements of 318 women were taken at random, whose ages were over 60 and fields of action were colleges, sports centers, or business sites in Seoul and the neighboring districts. A total of 33 features in the upper body and lower body were used fer the anthropometric measurement and analysis using anthropometry. The collected measurement data were processed statistically using the SPSS 12.0 program for technical statistical analysis, t-test, frequency analysis, correlation analysis. The results of the study are as follows. 1. Subjects were classified into two groups as a result of analysis for measurement data. It was revealed that 251(about 79 percent) women of total subjects(n=318) have a characteristic of abdominal obese body type and elderly women of these group usually had big abdomen rather than hip. The criteria of abdominal obesity based on waist-hip ratio, WHR(=0.85). 2. Aged abdominal obese women have shown much larger size in most body measurements except items of some vertical length, such as bust ponit-bust point, font interscye, back interscye with circumference and depth of armscye, bust, waist, abdomen and hip while showing no difference in height, biacrominal breadth, hip width, neck shoulder point to breast point, crotch length. 3. Vervaeck index(=100.1) and Rohrer index(=1.7) indicated that the abdominal obese women were fat in overall body. And aspect ratio of waist(=0.86), abdomen(=0.92) and hip(=0.75) also appeared high that the shape of cross sections in those regions was similar to a figure of circle 4. In view of the correlation coefficient between hip circumference and the rest measurement items, and between hip circumference inclusively of the abdomen protrusion and the rest measurement items, there were found some differences for each group. In case of Group (abdominal obese group), the former is smaller than the other. 5. In case of Abdominal obese women, hip circumference inclusively of the abdomen protrusion is more mutually related to the rest items related to make apparel pattern as waist circumference, depth of armscye and so on than what hip circumference is. This result indicated which must be considered hip circumference inclusively of the abdomen protrusion to make apparel patterns for abdominal obese women unlike women of common body types.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1721-1732
• /
• 2007

This study identified types of information source, and explored a path model for consumer information search by shopping attributes in the context of online decision making. Participants completed self-administered questionnaires during regularly scheduled classes. A total of 219 usable questionnaires were obtained from respondents who enroll at universities in the southwestern region of the United States. For data analysis, factor analysis and path model estimation were used. Consumer information source was classified into three types for online clothing purchases: Online source, Offline retail source, and Mass media. Consumers were more likely to rely on offline retail source for online clothing purchases, than other sources. In consumer information search by shopping attributes, online sources were more likely to be related to transaction-related attributes(e.g., incentive service), whereas offline retail source(e.g., displays in stores, manufacturer's catalogs and pamphlets) were more likely to be related to product and market related attributes(e.g., aesthetics, price) when purchasing clothing online. Also, the path model emphasizes the effect of shopping attributes on traditional retailer search behavior, leading to online purchase intention for clothing. This study supports consumer information search by attributes, and discusses a managerial implication of multi-channel retailing for apparel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.611-619
• /
• 2008

2.5D Mapping system that embody in this paper can make new design by doing draping to live various texture and model picture image of fashion clothes by pattern, and can confirm clothes work to simulation without producing direction sample or product directly. Also, the system can support function that can forecast fabric design and state of end article exactly, and the system can bring competitive power elevation of fashion industry and cost-cutting effect by doing draping using database of fabric and model picture image. 2.5D Mapping system composed and embodied by mesh warp algorithm module, light and shade extraction and application module, mapping path extraction module, mesh creation and transformation module, and 2.5D mapping module for more natural draping. Future work plans to study 3D fashion design system that graft together 3D clothes technology and 3D human body embodiment technology to do based on embodiment technology of 2.5D mapping system and overcomes expression limit of 2.5D mapping technology.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.125-137
• /
• 2021

This study was intended to develop a prototype of new Hanbok Cheollik one-piece based on design extracted through a preference survey on new Hanbok Cheollik one-piece. Through this, it was intended to provide information on patterns that are fundamental to the production of new Hanbok Cheollik one piece. The pattern of the experiment was produced by modifying D pattern, which was selected as excellent in the comparison of commercial Cheollik one-piece patterns. The SPSS 26.0 program was used to analyze the appearance evaluation of patterns. As a result of the 1^st evaluation of appearance and garment pressure, the shoulder, sleeve length, skirt length and sleeve width required modification, reducing the sleeve length by 8.0cm and the sleeve width by 1.0cm in total. The length of the skirt was reduced by 5.0cm and the shoulder end point was reduced by 0.5cm on both sides to modify the shoulder width. As a result of the 2^nd evaluation, the waist area, sleeve width, and skirt wrinkles were required to be corrected, reducing 2.0 cm waist width and 1.0 cm sleeve width and removing wrinkles on the front center and side area. The final pattern was highly appreciated. In future studies, it is thought that research should be conducted through study of Cheollik one-piece pattern according to material and age and the actual wearing experiment according to fabric and age.