• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.71-76
• /
• 2012

Biofouling by marine organisms such as algae and barnacles causes lots of significant problems in marine systems such as a rise of the maintenance-repair cost for the ship and the marine structures. In this work, a fluoropolymer, perfluoropolyether (PFPE), was applied as an anti-biofouling coating material that prevents the adhesion of marine organisms and facilitates the removal of them. Water contact angles of various surfaces were tested to examine the hydrophobicity of the PFPE-modified surface. The PFPE-modified surface showed the water contact angle of $64.5^{\circ}$ which is a remarkable rise from $46.7^{\circ}$ of amine-treated surface. When the substrate was treated with PFPE, the adhesion on the of the barnacle and other marine organisms were repressed around 15% by the enhanced hydrophobicity. In addition, the removal the of the adhered marine organisms were better comparing to that of the surface prepared by PDMS. Surfaces of the substrate treated by PFPE were characterized through physical and chemical methods to analyze the biofouling results. Degree of biomolecular adhesion to the substrate was quantified by the measurement the fluorescence intensity of marine organisms dyed with green fluorescence. PFPE is expected to be applicable not only to anti-biofouling systems but also to medical devices where the prevention of protein adhesion is required.

• International Commerce and Information Review
• /
• v.17 no.1
• /
• pp.165-191
• /
• 2015

The results of this study are the two. First, for convergence technology and convergence technology transfer based on analysis of previous studies I suggested a framework for convergence-type technology transfer conceptualization and measurement. Second, I am compared convergence-type technology transfer to total technology transfer from public research(university and public institute) to SME. Overall, despite the trend to increase technology transfer to SMEs, convergence-type technology transfer is only 4.4%. Both total technology transfer and convergence-type technology transfer to the Industry is active to electronic components, machinery, chemicals, food and beverage, and the medical. The role of universities is emphasized in both total technology transfer and convergence-type technology transfer. There are small transactions of less than 5 million in both total technology transfer and convergence-type technology transfer. Both total technology transfer and convergence-type technology transfer to the region are concentrated in Seoul, Daejeon and Gyeonggi-do.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.271-274
• /
• 2016

CT quality assurance imaging evaluation and enforcement as quantitative assessment by phantom image evaluation, assessment items include There are also contrasting the water attenuation coefficient, uniformity, noise, resolution, spatial resolution, 10mm slice thickness evaluation, contrast resolution, space for the resolution, the slice thickness evaluation, it is possible to estimate the error due to the evaluation by the subjective judgment of the tester, using a subjective error image processing program to be computed to minimize the objective evaluation. Basic recording conditions of the CT image quality control assessment is the same as special medical equipment quality control checks, the images were evaluated quantitatively using IMAGE J. For a CT attenuation coefficient, the uniformity, noise evaluation, were evaluated as CT quality control image the standard deviation of the measured value of the digital processing of image smaller and less noise uniform images than the, contrast and resolution assessment is the size of the diameter of a circle having a large the 1 inch, 0.75 inch, 0.5 inch quality if the diameter of the circle, was evaluated in the small circle in the near circle ellipse. Spatial resolution is evaluated by using a self-extracting features of an image processing program, all of the groups of members comprising the acceptance criteria to automatically extract, was evaluated to be very useful for the quantitative assessment. When CT image quality control assessment on the basis of the results such as the above, if using an image processing program to minimize the subjective judgment of the error evaluator and is determined more efficient than would be made quantitative evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2C
• /
• pp.184-191
• /
• 2008

Oriental base diagnosis method is not going to hospital different from Oriental medicine and because of the possible disease diagnosis through the network and many communication equipment. Especially diagnosis development using ocular inspection method aspect of Oriental medicine among an aging society advance into cut the medical cost for contribution. Ocular inspection method the most important look at disease color that is Observing a Person's Shape and Color which is implementation the development of methodology and important the build of application ability system. So in this paper study observing a person's shape and color implementation of ocular inspection. Specially body's the five viscera presentate the five colors disease color in face that is important the color coordinate system thesis so that proceed the experiment for the color coordinate system analysis. Finally five color extract need the observing a person's shape and color through experiment select the digital color system and so real skin color analysis and comparison about the experiment which suggest the something to color coordinate system the best case of digital color system for observing a person's shape and color implementation.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.493-499
• /
• 2009

응급의료에 관한 법률에 따라 구조 및 응급처치에 관한 교육의 대상자로 일반시민인 구급차등의 운전자, 여객자동차운송사업용 자동차의 운전자, 보건교사, 경찰공무원 등에게 심폐소생술 교육을 실시하여 26,900명이 과정을 수료(한국, 2007)하였으나 초중고 학교 교과과정 중에는 체계적인 응급처치 교육이 없고 교육강사, 교육장비 등이 취약(한국, 2005)하여 교육체계의 확립이 필요한 실정이다. Kerschaver 등(1989)은 학생들을 대상으로 심폐소생술 훈련을 하는 것은 효과적이고 11살 부터 단순화한 내용으로 보다 쉽게 교육을 시작할 수 있을 것이라고 했으며 Lester 등 (1996)은 지식과 술기 능력 간에는 상관이 없으나 중학교 1학년 때가 적절한 훈련시기라고 했고 Urey 등(2003)은 의무과목으로 6-7살 초등학생을 위한 응급처치 프로그램, Lubrano 등(2005)은 8-11살 학생을 대상으로 하는 응급처치 교육 프로그램의 운영을 보고했다. 박 등(2006)은 초등학교 5-6학년 학생과 성인 간의 심폐소생술 교육 효과를 분석하여 학생군이 과정에 대한 이해는 우수했으나 술기에서는 적절한 흉부압박이 미흡했다는 결과를 제시하여 초등학생을 대상으로 하는 이론 교육이 효과가 있었으나 실습 교육은 체격에 제한을 받는다는 점을 시사했다. 체격은 물리적으로 측정, 확인할 수 있는 사람 몸의 상태로써 성별, 키, 몸무게 등의 전체적인 것과 각 부위의 크기, 모양, 비율 등의 부분적인 것으로 구분할 수 있으나 여기서는 키, 몸무게가 흉부압박에 영향을 끼쳤다고 볼 수 있다. 따라서 본 연구에서는 초등학교 6학년 학생을 대상으로 체격조건(키, 몸무게)과 성인 마네킨 흉부압박 깊이 간의 상관관계를 밝히고 회귀식을 도출하여 효과적인 심폐소생술이 가능한 대상을 제시하고자 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.62-70
• /
• 2015

Recently the demand for projected capacitance touch screens is sharply growing especially for large screens for medical devices, PC monitors and TVs. Large touch screens in general need a controller of higher complexity. They usually have a larger number of driving and sensing lines, and hence it takes longer to scan one frame for touch detection leading to a low frame scan rate. In this paper, a novel touch screen control technique is presented, which scans each frame in two steps of simultaneous multi-channel driving. The first step is to drive all driving lines simultaneously and determine which sensing lines have any touch. The second step is to sequentially rescan only the touched sensing lines, and determine exact positions of the touches. This technique can substantially increase the frame scan rate. This technique has been implemented using an FPGA and an AFE board, and tested using a commercial 23-inch touch screen panel. Experimental results show that the proposed technique improves the frame scan rate by 8.4 times for the 23-inch touch screen panel over conventional methods.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.198-205
• /
• 2019

The purpose of this study was to identify whether cutaneous sensory (CS) changes induced by mechanical intervention(MI) increases the trigger point threshold and muscle tone of the same spinal segment to neck disc patients. Thirty persons with Neck disc patients were recruited in this experiment. The subjects consisted of 10 men and 20 women. The mechanical stimulus group induced CS changes for 5 minutes using the Graston instrument and the control group received no action. The CS changes were estimated by using the Von Frey Filament, PPT changes were measured by using the pressure threshold meter and msucle tone changes were measured by using Myotone pro. CS threshold increased significantly when MI was applied (p<0.05). On the same spinal segment, increases in the right infraspinatus PPT and muscle tone was observed (p<0.05) and decreases in the right trapezius PPT was observed(p<0.05). However, the PPT and muscle tone changes in other muscles were not significantly different. Furthermore, the control group CS, PPT and muscle tone were not significantly different. As a result, CS changes induced by MI make to change PPT and muscle tone on the same spinal segment. Therefore, application of MI to the same spinal segment may be of clinical significance as a new rehabilitation method for increasing pain threshold, muscle tone and pain control in neck disc patients.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.197-197
• /
• 2019

총인처리시설에서는 응집제를 주입하여 인이나 오염물질을 침전시켜 처리하고 있으며 PAC(poly aluminum chloride)나 $FeCl_3$, $Al_2(SO_4)_3$, 등 다양한 종류의 응집제가 사용되어지고 있다. 하지만 기존에 사용되어 지고 있는 알루미늄계열의 응집제는 처리수에 잔류이온이 존재하게 되어 인체에 축적돼 알츠하이머 병 등 신체질환을 유발할 수 있는 단점이 있다. 따라서 이러한 단점을 사전에 예방하기 위해 $TiCl_4$와 같은 티타늄계열 응집제에 대한 연구가 진행되고 있다. $TiCl_4$ 응집제는 인 제거에 효과적으로 적용할 수 있으며 수중에 잔류이온을 유발하지 않으며 Ti이온은 치과임플란트나 의료장비로 사용될 만큼 인체에 무해하다고 알려져 있다. 응집제 사용에 따라 생성된 응집슬러지의 처리방안에 있어서 기존 응집제의 경우 생성된 슬러지의 대부분은 하수슬러지 위탁처리업체를 통해 소각 및 매립, 재활용 되고 있으나, $TiCl_4$를 응집제로 사용할 경우 생성된 슬러지를 인발하여 건조 및 소성을 통해 이산화티타늄으로 재활용할 수 있어 슬러지를 친환경적으로 처리가 가능해 기존 슬러지 처리방안의 경제적, 환경적 부담을 줄일 수 있는 장점이 있다. 따라서 본 연구에서는 $TiCl_4$를 하수처리장 방류수에 주입하여 수중의 총인(T-P)을 처리한 후 생성된 슬러지를 인발하여 건조와 소성과정을 거쳐 이산화티타늄을 제조하였다. 방류수를 취수해 2.5mg/L의 초기 총인 농도를 가진 원수를 제조하였으며 제조된 원수에 $TiCl_4$를 0.6mL 주입하였을 때 99.93%의 총인제거효율을 얻을 수 있었다. 응집 실험 후 생성된 슬러지를 인발하여 건조 후 $300{\sim}1000^{\circ}C$의 각각 다른 온도조건에서 소성하여 이산화티타늄을 제조하였으며, SEM과 XRD를 통해 제조된 이산화티타늄의 표면특성과 결정성 분석을 실시하였다. 제조된 이산화티타늄은 $500{\sim}800^{\circ}C$에서는 아나타제, $900{\sim}1000^{\circ}C$에서는 루타일 결정구조가 나타났다. 또한, $TiCl_4$ 주입량에 따른 이산화티타늄의 최종 생산량과 제조 시 사용되는 건조로 및 소성로의 경제적 비용 등을 고려하여 이산화티타늄 1Ton을 제조하기 위해 필요한 단가를 산출하였다. 본 연구에서 제조된 이산화티타늄 1kg의 생산단가는 약 5,400원으로 나타났으며, 가장 많이 사용되는 P-25 광촉매 보다 저렴한 가격으로 제조 및 판매를 기대할 수 있다. 따라서 하수처리장에 적용 시 기존 응집제 보다 비싼 $TiCl_4$ 비용을 보완하고 친환경적인 슬러지 처리로 제조된 이산화티타늄의 유통 및 현장적용을 통해 경제적, 환경적으로 우수하다고 판단된다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.999-1005
• /
• 2021

The object of this research is CS, which increases resolution while shortening inspection time, is applied to MRA to compare the quality of images for SENSE and CS techniques and to evaluate SNR and CNR to find out the optimal techniques and to provide them as clinical basic data based on this information. Data were analyzed on 32 patients who performed TOF MRA tests at a university hospital in Chung cheong-do (15 males, 17 females), ICA stenosis:10, M1 Aneurysm:10, and average age 53 ± 4.15). In the inspection, the inspection equipment was Ingenia CX 3.0T, Archieva 3.0T, and 32 channel head coil and 3D gradient echo as a method for equipment data. SNR and CNR of each image were measured by quantitative analysis, and the quality of the image was evaluated by dividing the observer's observation into 5 grades for qualitative evaluation. Imaging evaluation is described as being significant when the p-value is 0.05 or less when the paired T-test and Wilcoxon test are performed. Quantitative analysis of SNR and CNR in TOF MRA images Compared to the SENSE method, the CS method is a method measurement method (p <0.05). As an observer's evaluation, the sharpness of blood vessels: CS (4.45 ± 0.41), overall image quality: CS (4.77 ± 0.18), background suppression of images: CS (4.57 ± 0.18) all resulted in high CS technique (p = 0.000). In conclusion, the Compressed SENSE TOF MRA technique shows superior results when comparing and evaluating the SENSE and Compressed SENSE techniques in increased flow rate magnetic resonance angiography. The results are thought to be the clinical basis material in the 3D TOF MRA examination for brain disease.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.284-292
• /
• 2019

To evaluate the usefulness of pediatric chest CT scans by comparing the dose, examination time, and image quality by applying Helical mode, High-pitch mode, and Volume Axial mode to minimize the radiation exposure and obtain high diagnostic value. Revolution (GE Healthcare, Wisconsin USA) was used to divide PBU-70 phantom into Helical mode, High-pitch mode, and Volume Axial mode. After acquiring images, ROI is set for each image, heart, bone, lung, and back-ground air, and the average value is obtained by measuring CT number (HU) and noise (SD). SNR and CNR were measured and compared with DLP values provided directly by the equipment. Determining statistical significance Statistical analysis was performed using ONE-WAY-ANAOVA using SPSS 21.0. In this experiment, it was possible to inspect at a short time without deterioration of image quality with the lowest dose when using volume axial mode. Although the detector coverage of 16 cm is limited to all pediatric chest CT scans, it is recommended to be actively used in pediatric patients, and further study is needed to apply other test sites in volume axial mode.