• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.3
• /
• pp.171-178
• /
• 2013

In this study, the sludge that occurs in the initial operation of coagulation system developed for the treatment of CSOs were returned to the flocculation reactor. The purposes of this study were to analyze the Characteristics of flocs that are generated through the recycling sludge and settling characteristics of sludge, and to evaluate the possibility that high concentrations of particulate matter in the initial inflow of CSOs could be used as an weighted coagulant additive. As a result, the concentration of treated CSOs pollutants at the beginning of the CSOs influent with a large amount of particulate matter over 20 ${\mu}m$ was low, after gradually increasing the concentrations of them. The flocs generated from the sludge return were similar in size compared to flocs generated through injection of micro sands, and settling velocity in case of return sludge injection was decreased from 55.1 cm/min to 21.5 cm/min. SVI value of the sludge accumulated at the bottom of the sedimentation tank was 72, and settled sludge volume decreased rapidly due to the consolidation of sludge to the time it takes to 10 minutes. these mean that sludge used for recycling has good settling characteristic. A condition of returned sludge which is 0.1% return of 0.3% extraction was formed in the balance of settlement and extraction. In this case, This condition was to be adequate to maintain the proper concentration such as 100~200 mg/L of TS and 50~100 mg/L of VS in the flocculation reactor. The usage of the return sludge containing particulate matters of CSOs as an weighted coagulant additive was able to secure a stable treated water quality despite the change of influent water quality dynamically. Furthermore, it can be expected to reduce the alum dosage along with the sludge production.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.263-270
• /
• 2024

In this study, impact factors for dehydration with KOMIR-Tube system using flocculant and dewatering tube were evaluated for mine drainage sludges. The experiments were conducted on semi-active facility sludges with water contents above 90 % using KOMIR-Tube system. The flocculant and input amount were determined from laboratory experiment and the dewatering efficiency was verified onsite experiment. The sludge characteristics were identified by instrumental analysis such as zeta potential measurement, particle size analysis, XRD, XRF and SEM-EDS. Selection of flocculants for sludge dewatering treatment need to consider not only precipitated rate but also filterated rate. Floc size has to keep at least 0.7 mm. From on-site experiments, sludge dewatering using KOMIR-Tube system suggests to carry out April and May that is low rainfall and humidity considering to climate conditions. Also, dewatering rate depends on the crystal degree of mineral that mainly makes up sludges. Particularly, goethite of the iron hydroxides has better dewatering rate than ferrihydrite. Ferrihydrite is low degree of crystallinity and uncleared or broad shaped crystal, goethite is good crystallinity with needle shaped crystal so that the effect of flocculation and dewatering showed to depend on the crystal. In results, impact factors of dewatering for mine drainage sludges are related to flocculant, climate, crystallinity and shape of iron hydroxides.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.479-490
• /
• 2003

CBD is a software development approach based on reusable component and supports easy modification and evolution of software. For the success of this approach, a component must be developed with high cohesion and low coupling. In this paper, we propose the two types of clustering analysis technique based on affinity between use-cases and classes and propose component identification method applying to this technique. We also propose component reference model and CBD methodology framework and perform a ease study to demonstrate how the affinity-based clustering technique is used in component identification method. Component identification method contains three tasks such as component extraction, component specification and component architecting. This method uses object-oriented concept for identifying component, which improves traceability from analysis to implementation and can automatically extract component. This method reflects the low coupling-high cohesion principle for good modularization about reusable component.

• Journal of KIISE:Software and Applications
• /
• v.30 no.5_6
• /
• pp.389-397
• /
• 2003

The component-based development methodology becomes famous as the new way for reuse. The goal of the reuse is improvement of quality, productivity and independence on the software development. For the improvement in the quality of a component-based system, it is necessary to research component metrics in the early phase of a component development. Hence, in this paper, we propose new component metrics using the information of a component analysis phase. Those are CCI(Complexity of Component Interface) and LCC(Lack Cohesion of Component interface). CCI indicates a difficulty about comprehension, modification, management, use of interface. LCC indicates a functional independence about how strong the elements are related with. Therefore, it is possible to predict and manage the quality of a component to be developed. Predicting a lowness of complexity and highness of cohesion as an independent functional unit by a component interface in the early phase of a component development, we can expect the improvement in the quality of a system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.26-33
• /
• 1999

Coastal sediments in polluted areas adsorb many hydrophobic pollutants such as PCBs. During environmental remediation projects like dredging, they can be resuspended and transported to less polluted areas. To assess the environmental impact, the author previously developed a mathematical model that can simulate the changes of particle size distribution (PSD) due to sedimentation, vortical dispersion and coagulation. In this research, the simulation results using this model were presented in conjunction with observed PSDs from a 2-m settling column simulating coastal environments. The simulations showed that the model predictions were in fairly good agreement with the observed data (changes of PSDs in terms of depths and times), and that the resuspended sediments coagulated during the vertical transport. So, this study showed that the developed model has a good ability to describe the very complicated phenomena of real aggregation and vortical transport dynamics of coastal sediments with various particle sizes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.141-150
• /
• 2006

To develop the microbial agents for the environmentally-friendly treatment and recycling of food waste, useful microorganisms, which showed higher degradation activities to various organic compounds and possessed flocculating activities, were isolated from the earthworm. One of the isolated strains, named JS-01, was further selected due to its higher flocculating activity against 0.5% Kaolin clay. JS-01 was identified as Bacillus pumilus sp. by 16s rDNA analysis. The optimal temperature and pH for the growth of JS-01 to express the flocculating activity was found to be at $37^{\circ}C$ in pH 7.0 of EPS broth medium. JS-01 also expressed good degrading activity against cellulose, which is one of the representative organic materials in food waste. We propose that JS-01 will be a good candidate for the efficient treatment of food waste and leachate due to the property to degrade cellulose and flocculating activity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.500-504
• /
• 2012

하구부에서의 점착성 유사의 이동량(유사량)은 조류의 비대칭성, 파랑, 하천 흐름, 조류 유속과 수위의 불일치성, 유사특성, 응집현상, 하상 침식율, 바닥지형 등 많은 인자의 영향을 받는다. 본 연구는 이들 인자들이 어떻게 영향을 주는지 살펴보기 위해 점착성 유사의 이동을 모의하는 1DV 모형을 이용하여 수치실험을 실시하고 그 결과를 분석하는 것이 목적이다. 점착성 유사의 실측자료가 부족한 실정과 현상에 대한 원인을 체계적으로 연구하는 방법을 참고하여 이상적인 조류조건을 가정하고 수치모형을 적용하였다. 점착성 유사의 특성을 고려하기 위해 응집현상이 고려되었고 가변적인 한계소류력이 적용되었다. 모의 결과를 통해서 조류의 한 주기 동안 이동하는 점착성 유사량은 가는 비점착성 유사의 이동량에 비해 조류 유속의 왜곡도에 영향을 덜 받을 수 있다는 결론이 도출되었다. 이러한 점은 가변적인 한계소류력에 기인하는 것으로 고려되며, 점착성 유사의 이동량을 연구하는 경우 가변적인 한계소류력이 고려되어야 한다는 점을 알 수 있다. 조류의 유속이 왜곡된 경우 하천으로부터 유하하는 유량이 크지 않은 경우 유사량의 방향이 조류 1 주기의 평균방향과 다를 수 있다는 결론 역시 도출된다. 조류의 수위와 유속 사이의 위상차가 유사량에 큰 영향을 주는 것으로 나타났다. 위상차가 무시되는 진행파 형태의 조류의 경우 큰 유사량을 나타내지만 약 $90^{\circ}$의 위상차를 나타내는 정상파의 경우는 무시할 정도의 유사량이 계산되었다. 위상차가 하구부의 형태에 따라서 결정된다는 점을 생각할 때 자연적 변화, 인위적 공사 등에 따라 하구부의 형태적 변화가 발생하는 경우는 유사량의 변화 역시 고려되어야 한다는 점을 알 수 있다. 이상적인 조건에서 수행된 본 연구의 보다 객관적인 검증을 위해 Ems/Dollard 하구부에서 측정된 수위, 유속, 부유사 농도 자료와 비교하였다. 그 결과 본 연구의 이상적인 조건과 유사한 특성을 나타낸다는 점을 알 수 있었고 본 연구의 결과가 자연에서 나타나는 현상의 특성을 대변할 수 있을 것으로 유추된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.212-221
• /
• 2011

Wastewater treatment plants (WWTPs) are required to meet the reinforced discharge standards which are differentiated as 0.2, 0.3 and 0.5 mg-TP/L for the district I, II and III, respectively. Although most of WWTPs are operating advanced biological phosphorus removal system, the supplementary phosphorus treatment facility using chemical addition should be required almost at all WWTPs. Therefore, water quality data from several exemplary full-scale plants operating phosphorus treatment process were analyzed to evaluate the reliability of removal performance. Additionally, a series of jar tests were conducted to find optimal coagulants dose for phosphorus removal by chemical precipitation and to describe characteristics of the reaction and sludge production. Chemical costs and the increasing sludge volume in physicochemical phosphorus removal process were estimated based on the results of jar tests. The minimum coagulant (aluminium sulfate and poly aluminium chloride) doses to keep TP concentration below 0.5 and 0.2 mg/L were around 25 and 30 mg/L (as $Al_2O_3$), respectively, in the mixed liquor of activated sludge. In the tertiary treatment facility, relatively lower coagulant doses of 1/12~1/3 the minimum doses for activated sludge were required to achieve the same TP concentrations of 0.2~0.5 mg/L. Increase in suspended solids concentration due to chemical precipitates in mixed liquor was estimated at 10~11%, compared to the concentration without chemical addition. When coagulant was added into mixed liquor, chemical (aluminium sulfate) cost was estimated to be 4~10 times higher than in secondary effluent coagulation/separation process. Sludge production to be wasted was also 4~10 times higher than secondary effluent coagulation/separation process.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.489-499
• /
• 2012

The purpose of this study is to examine the relation between communication and conflict in the ship organization and to analyze the affect of the conflict on the group cohesiveness and organizational effectiveness in the view of dysfunctional conflict that would play on the negative role to decrease the group cohesiveness and organizational effectiveness. The empirical survey showed that the intragroup and intergroup communications in the ship organization affect on the conflict of within and between groups, these conflicts decrease the group cohesiveness and organizational effectiveness, and that cohesiveness affect the organizational commitment and the job satisfaction of ship organization member significantly.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.167-172
• /
• 2000

Lithospermum erythrorhyzon has been used as a red fooddye and traditional Chinese medicine to treat wounds, skin diseases and burns. Platelet activation plays an important role in thrombosis and haemostasis. Here, we studied the inhibition of platelet activation and its active compound from the root of Lithospermum erythrorhyzon. Its ethyl acetate extract inhibited the aggregation of washed rabbit platelets induced by collagen or thrombin. Five naphthoquinone pigments , shikonin , acetylshikonin , is obutylshikonin, $\alpha$-methyl-n-butylshikonin and $\beta$,$\beta$-dimethylacrylshikonin were isolated by means of high pressure liquid chromatography. The structures were determined by comparison of their proton nuclear magnetic resonance spectra. The potency of their inhibition was in the following order : $\beta$,$\beta$-dimethylacrylshikonin$\geq$$\alpha$-methyl-n-butylshikonin>isobutylshikonin>acetylshikonin>shikonin. It is suggested that the size of the aliphatic hydroxy group of shikonin is important for the enhancement of potency.