• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.393-408
• /
• 2005

We developed and compared two automatic algorithms for moving object detections in the YSTAR-NEOPAT sky survey program. One method, called starlist comparison method, is to identify moving object candidates by comparing the photometry data tables from successive images. Another method, called image subtraction method, is to identify the candidates by subtracting one image from another which isolates sources moving against background stars. The efficiency and accuracy of these algorithms have been tested using actual survey data from the YSTAR-NEOPAT telescope system. For the detected candidates, we performed eyeball inspection of animated images to confirm validity of asteroid detections. Main conclusions include followings. First, the optical distortion in the YSTAR-NEOPAT wide-field images can be properly corrected by comparison with USNO-B1.0 catalog and the astrometric accuracy can be preserved at around 1.5 arcsec. Secondly, image subtraction provides more robust and accurate detection of moving objects. For two different thresholds of 2.0 and $4.0\sigma$, image subtraction method uncovered 34 and 12 candidates and most of them are confirmed to be real. Starlist comparison method detected many more candidates, 60 and 6 for each threshold level, but nearly half of them turned out to be false detections.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.957-964
• /
• 2017

The purpose of this study was to determine the optimum spray drying conditions of soft persimmon latte using response surface methodology that is a statistical procedure used for optimization studies. A central composite design was applied to investigate the effects of independent variables, inlet temperature ($X_1$), air flow rate ($X_2$), and feed flow rate ($X_3$), on responses such as yield, water absorption index, and total phenolic compounds. Statistical analysis revealed that independent variables significantly affected all the responses. A maximum yield of 8.11 g was obtained at $90^{\circ}C$ of $X_1$, 51.82 mL/min of $X_2$ and 7.00 mL/min of $X_3$. A minimum water absorption index of 0.58 was obtained at $101^{\circ}C$ of $X_1$, 60.00 mL/min of $X_2$ and 17.00 mL/min of $X_3$. A maximum total phenolic compounds of $298.02{\mu}g/mL$ was obtained at $90^{\circ}C$ of $X_1$, 43.33 mL/min of $X_2$ and 17.00 mL/min of $X_3$. In conclusion, the best spray drying conditions were as follows: $X_1$, $90^{\circ}C$; $X_2$, 53 mL/min; $X_3$, 17 mL/min. Under those optimal conditions, the powder's yield (7.46 g), water absorption index (0.54), and the content of total phenolic compounds ($294.75{\mu}g/mL$) were estimated.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1033-1040
• /
• 2016

In Korea, the aerial parts of the halophyte Salicornia europaea, known as hamcho, are used in salads in April–June and in oriental medicine in September–October In this study, with the aim of developing functional foods to aid blood circulation, hot water extract (HWE) and ethanol extract (EE) were prepared using hamcho harvested from the fields of Shinan, Jeonnam, Korea on 5th April (HWE-04, EE-04), 5th July (HWE-06, EE-06), 5th August (HWE-08, EE-08), 5th September (HWE-09, EE-09), and 5th October (HWE-10, EE-10), and their antioxidant and antithrombosis activities were evaluated. Among the HWEs, HWE-10 showed the highest concentration of total polyphenols and total flavonoids (22.4 and 17.6 mg/ml, respectively), and EE-09 had the highest concentration among the EEs (20.1 and 19.3 mg/ml, respectively). Among the HWEs and EEs, HWE-08 and EE-08 had the highest total sugar and reducing sugar content. In the antioxidation assay, HWE-10 and EE-09 showed strong reducing power, as well as DPPH, ABTS, and nitrite scavenging activities. The calculated RC₅₀s of EE-09 against DPPH, ABTS, and nitrite were 578, 277, and 68.8 μg/ml, respectively. The antithrombosis activity assay revealed that HWE-04, HWE-06, EE-04, and EE-06 had anticoagulation activity against coagulation factors and that HWE-08, HWE-09, EE-08, and EE-09 expressed strong thrombin inhibitory activity, which was comparable to the antithrombosis activity of aspirin. In addition, EE-06 and HWE-08 exhibited strong aggregation inhibitory activities against human platelets. The results suggest that extract from hamcho harvested in particular periods and prepared using a defined solvent has strong potential as a novel food ingredient and an antioxidant and antithrombosis agent.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.406-413
• /
• 2012

Effect of three additives, chitosan, ferric chloride, and MPE50 on membrane fouling reduction was studied. They were introduced with various dosing rate into activated sludge, and changes in filtration resistance measured by the batch cell filtration test were evaluated. Both the filtration resistance and the specific cake resistance were minimized at 20 mg/g-MLSS with chitosan, 70 mg/g-MLSS with ferric chloride, and 20 mg/g-MLSS with MPE50 addition, respectively. Introduction of the additives into the activated sludge resulted in reduction of not only cake resistance, but also fouling resistance. However, the chitosan addition to three different activated sludge resulted in three different optimal dose of 10, 20, 30 mg/g-MLSS, respectively. This implies that the optimal dose is dependent on sludge characteristics rather than a constant value. Overdose above the optimal dosage always aggravated filterability in all cases. Zeta potential of sludge flocs, relative hydrophobicity, floc size distribution, soluble EPS concentration and supernatant turbidity were measured in order to analyze fouling reduction mechanism. Nearly neutral surface charge along with the largest particle size was observed at the optimal dose. This could be explained by particle destabilization and restabilization mechanism as positively charged additives were injected into sludge flocs of negative surface charge. Both soluble EPS concentration and supernatant turbidity also showed the lowest value at the optimal dose. These foulants are believed to be coagulated and entrapped in sludge flocs during flocculation. Chitosan and MPE50 which are cationic polymeric substances showed higher reduction in both soluble EPS and fine particles comparing with ferric chloride.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.236-242
• /
• 2017

Chia (Salvia hispanica L.) seed, originated from Central America, is a nutritious food especially rich in dietary fiber and protein. In this study, we investigated the quality and sensory characteristics of Yanggang with chia seed powder (CSP). Red bean paste was replaced with CSP at 0% (Control), 1% (CSP1), 2% (CSP2), 3% (CSP3) and 4% (CSP4). The pH values of chia seed Yanggang tended to decrease from Control (6.84) to CSP4 (6.67); whereas, the moisture contents of Yanggang samples tended to increase. The soluble solid contents of CSP4 were the highest ($3.33^{\circ}Bx$), as compared to the Control which showed the lowest values ($2.77^{\circ}Bx$). In the CSP-added groups, the L-value (lightness), a-value (redness) and b-value (yellowness) were increased, while the ${\Delta}E$ (total color difference) was decreased, as compared to the control group. Hardness and springiness were both increased from control ($49.77g/cm^2$ and 464.80%, respectively) to CSP4 ($72.21g/cm^2$ and 532.43%, respectively). However, cohesiveness decreased from control (47.41%) to CSP4 (37.34%). Chewiness and adhesiveness showed no significant group-wise difference (p<0.05). Total polyphenol content ranged from 7.23 to 10.73 mg GAE/100 g, with a lower ABTS $IC_{50}$ of the CSP-added groups than that of the control group. Samples from the CSP-added as well as Control groups showed no significant differences among all items on the sensory evaluation test, except flavor. The results indicated that CSP had significant effects on the soluble solid contents and texture of Yanggang. Thus, the addition of 2% of CSP is desirable for making Yanggang.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.2
• /
• pp.144-150
• /
• 2002

Sweet persimmon were tested in order to identify their use as secondary material which is excellent in function and taste as food. Samples were soaked for 1 and 5 min with NaCl concentration(0, 1 and 3%) at a certain heating temperature(25, 75 and 95$\^{C}$), and then tannin, vitamin C, flavonol, color intensity, sensory test and textural properties were analysed. The results of the analyses were as follows. Tannins were decreased as heating temperature, NaCl concentration and soaking time were increased, especially, that the control was 420 mg% but decreased 228 and 198 mg% at 95$\^{C}$(1 and 3% NaCl concentration) for 5 min. soaked in each. Vitamin C content also decreased more in higher temperature and NaCl concentration than control(122.4 mg%). Color intensity showed higher value in 1. and b than in heating temperature, NaCl concentration and soaked time longer remarkably, but a value decreased. The peel of sweet persimmons was analyzed myricetin(2.0 $\mu$g/g), quercetin(34.5 $\mu$g/g) and kaemperol(1.1$\mu$g/g), but in pre-treatment sample(95$\^{C}$, 1% NaCl concentration and 5 min. soaked) was showed higher myricetin(9.5 $\mu$g/g) and quercetin(5.5 $\mu$g/g). Textural properties were good in pre-treatment sample(95$\^{C}$, 1% NaCl concentration and 5 min. soaked) such as brittleness, cohesiveness, gumminess and chewiness. In sensory analysis, the pre-treatment samples(95$\^{C}$, 1% NaCl concentration and 5 min. soaked and 95$\^{C}$, 3% NaCl concentration and 1 min. soaked) were showed higher point than others.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1106-1113
• /
• 2017

The objective of this study was to determine the quality characteristics of fried yakgwa and baked yakgwa prepared with different amounts of P. frutescens powder. Moisture contents of fried yakgwa were 7.05%, and moisture content of baked yakgwa with different amounts of P. frutescens powder were 12.42~10.44% and decreased with higher amount of P. frutescens powder. This result can be attributed to loss of water in yakgwa in the course of the fried process. Although the degree of expansion of baked yakgwa was lower than that of fried yakgwa, size and shape of yakgwa were maintained. Yakgwa is appropriate as a cookie type product. Crude lipid contents of fried yakgwa were higher than those of baked yakgwa due to the exchange reaction of water and fat during the fried process. Energy of fried yakgwa was 501 kcal and was higher than that of baked yakgwa with different amounts of P. frutescens powder. This greatly affected the fat content of each sample. Energy of baked yakgwa increased with higher amount of P. frutescens powder due to the characteristics of the ingredients or jasoyeop. For chromaticity determination, L values of fried yakgwa were lower, but a, and b values were higher than those of baked yakgwa, and L, a, and b values decreased when P. frutescens powder increased. Texture measurement showed that hardness, cohesiveness, chewiness, gumminess increased with higher amounts of P. frutescens powder, whereas springiness decreased. The antioxidant activities of fried yakgwa measured based on DPPH scavenging activity were higher than those of baked yakgwa with 0%~0.2% P. frutescens powder and lower than those of baked yakgwa with 0.3%~0.4% P. frutescens powder. In the sensory evaluation, baked yakgwa with 0.1% addition of P. frutescens powder showed the highest preference in terms of overall acceptance, and 0% addition of P. frutescens powder showed the highest preference in terms of color and flavor. These results suggest that P. frutescens powder may be a useful ingredient in baked yakgwa to improve quality and sensory properties.

• Journal of the Korean Chemical Society
• /
• v.67 no.2
• /
• pp.81-88
• /
• 2023

The contribution of hydrophobic residues to the protein folding reaction was studied by using HubWA variant proteins with I and L to V mutation. Folding kinetics of all V variant proteins was observed to be satisfied by a three-state on-pathway mechanism, U ⇌ I ⇌ N, where U, I, and N represent unfolded, intermediate, and native state, respectively. Three-state folding reaction was quantitatively analyzed and the free energy of folding of each elementary reactions and overall folding reaction, ΔG^o_UI, ΔG^o_IN, and ΔG^o_UN, were obtained. From the ratio of free energy difference between the variant protein and HubWA, ΔΔG^o_UI/ΔΔG^o_UN (ΔΔG^o_UI = ΔG^o_UI (variant protein) - ΔG^o_UI (HubWA) and ΔΔG^o_UN = ΔG^o_UN (variant protein) - ΔG^o_UN(HubWA)), the contribution of hydrophobic residues to HubWA folding was analyzed. The residues which are located in the hydrophobic core between α-helix and β-sheet, I3, I13, L15, I30, L43, I61 and L67, showed ΔΔG^o_UI/ΔΔG^o_UN value of ~0.5 when each of these residues was mutated to V, indicating that these residues form relatively solid hydrophobic core in the intermediate state. Residues located at the end of secondary structures and loop, I23, L69 and I36 showed ΔΔG^o_UI/ΔΔG^o_UN value below 0.4 when each of these residues was mutated to V, indicating that the region containing these residues are loosely formed in the intermediate state. V17A, L50V and L56V showed fairly high ΔΔG^o_UI/ΔΔG^o_UN value of ~0.8. Since L50 and L56 are located in the region containing long loop (residue 46 to 62), it is suggested that the high ΔΔG^o_UI/ΔΔG^o_UN value of these residues prevents the formation of aggregate at the early stage of folding reaction.