• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.317-324
• /
• 2022

In this paper, an analysis method that considers the initial static displacement of structural members using an equivalent single-degree-of-freedom system is presented. Newmark's dynamic analysis algorithm was improved to consider the effect of the initial static displacements of structural members. The effect of the initial static displacement on the maximum response according to the assumed duration of the blast load and natural period of the member was investigated. The effects of positive and negative static displacements on the maximum dynamic responses of structural members subjected to a positively applied blast load were also studied. Modified response charts for the shock-type and pressure-type waves are presented so that static displacements can easily be considered. Using a design example, we demonstrate the significance of the modified response chart that considers the static displacement. Based on the results of this study, the maximum response of a the structural member can be easily obtained whilst considering its initial static displacement. The modified response chart presented in this study can be used for the structural design of plants and military facilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.315-324
• /
• 2010

We developed a design chart for very large floating structures through intensive hydroelastic analysis. Using this chart, one can predict the hydroelastic response of very large floating structures preliminarily at design stage without the cost-demanding hydroelastic analysis. This paper presents two new design charts based on the theory of VLFS. The purpose of the first design chart is to determine RAOs of the maximum longitudinal stress of VLFS considering properties of waves and structures. The design chart I can be applied to any sizes of VLFS in same aspect ratios and dimensionless stiffness parameters. The second design chart is developed to take into account the actual wave condition by using the Bretschneider spectrum with Beaufort sea state.

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.126-147
• /
• 1994

Lyme 질환은 미국 코넷티컷주의 라임지방에서 관절염증상을 보이는 소아과환자에게서 1975년 처음 발견되었다, 사슴, 누루, 개 등에 기생하는 진드기에 의해 전염되며, 발병초기에는 감기증상을 수반한 황소의 눈과 비슷한 붉은 반점이 생긴다. 적기에 치료하지 않으면, 관절염, 심장질환, 안면신경마비 등으로 악화될 수 있다. 본 논문의 목적은 두가지로 나누어 볼 수 있다. 먼저, 진단초기의 Lyme질환과 관련된 의료 및 기타 경제적 비용을 저렴하게 계측할 수 있는 방법론을 개발하고 그 유효성을 검증하는 것이다. 둘째로 lyme질환의 비용에 대한 여러종류의 총괄적 계측치를 제공하고 발병의 위험요인을 색출하는 것이다. 본 논문에서는 차트분석이나 임상연구 등 고가의 비용이 수반되는 분석기법 대신에 Lyme질환 다발지역에 대한 설문조사를 실시하고 그 유효성을 재설문조사를 통해서 검증하는 방법을 사용하였다. 자료분석상의 난점은 조사대상자마다 응답하지 않은 항목(Missing Value)이 다르기 때문에, 총 비용을 계산할 때 모든 항목에 응답한 조사대상자만을 사용한다면 표본의 크기가 너무 작아지는 것이었다. 이에 대한 대안으로 총비용 및 부분별 비용의 합을 계산할 때 표본의 일부가 응답하지 않은 항목에 대해서는 그 항목에 응답한 나머지 조사대상자의 응답치 평균을 대체하는 방법을 사용하였다. 통계적 분석결과, 질환의 증상시작부터 설문조사시기까지 Lyme질환과 관련된 사회적 총비용은 US$ 6400으로 추정되었다. 이중에 200가량은 환자의 보호자와 관련된 비용이고 나머지는 환자와 관련되 것이다. 총의료비용의 평균은 계산방법에 따라서 US$ 3000-4200의 범위를 보였다. 응답되지 않은 항목을 해당항목에 대한 응답치평균으로 대체하였을 때 총의료비평균은 US$ 4108이었다. 시간비용을 생산성손실에 대한 사회적 가치와 실제임금 손실의 두가지 방법에 의해 계산되었다. 실제임금손실은 생산손실의 사회적 가치의 약 30%에 불과하였다. 본 논문의 결과는 의료비용 및 비용과 생산성손실에 대한 정보가 지역보건담당자에 의한 전화설문조사에 의해 경제적이고도 일관성 있게 수집될 수 있다는 근거로 해석될 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.581-584
• /
• 2018

최근 다양한 분야에서 대량의 데이터를 수집하여 처리하고 분석하는 빅데이터 기술이 활용되고 있다. 빅데이터 분석을 위해서는 데이터 시각화 기술이 필수적이다. 본 논문에서는 REST API를 사용하여 시계열 데이터베이스에 데이터를 질의하고, 응답받은 시계열 데이터를 다양한 형태의 차트로 시각화하는 마이크로서비스(Graphgen)를 설계하고 구현한다. 이 서비스는 데이터의 변동에 따라 실시간으로 시각화 객체를 갱신하며, 대용량 데이터 처리의 성능저하를 최소화하도록 개발된다. Graphgen은 InfluxDB와 OpenTSDB 시계열 데이터베이스와 Bokeh 시각화 라이브러리를 지원하며, 추후 서비스 확장이 용이하도록 개발된다. 또한 부하 분산과 통합 배포 관리를 위하여 컨테이너를 기반으로 개발된다.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.75-86
• /
• 2013

This paper presents a technique to implement embedded systems using interrupts of the one-chip microcontroller with many peripherals based on a multiple finite state machines model. The multiple finite state machine model utilizes the structure of FSMD used for hardware design and the features of flow control by interrupts. The main finite state machine corresponds to the main program and the sub-state machines corresponds to the interrupt subroutines. Therefore, interrupts from the peripherals can be processed immediately in the sub-state machines. The request and reply variables are used to interface between the finite state machines. Additional operating system is not necessary for the context switching between the main state machine and the sub-state machine, because the flow-control caused by interrupt can be replaced with the switching. An embedded system modeled on multiple finite state machine with ASM charts can be easily implemented by the conversion of ASM charts into C-language programs. This implementation technique can be easily adopted to the hardware oriented embedded systems because of the detail description of the model and the fast response to the interrupt events in the sub-state machine.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.15-19
• /
• 2016

The gate bias dependence of kink phenomenon with a large deviation from the resistance circle in Smith chart is observed in the frequency response of $S_{11}$-parameter for large multi-finger RF MOSFETs. For the first time, this bias dependence is analyzed by measuring magnitude and phase of $S_{11}$-parameter, input resistance and input capacitance. As a result, $V_{gs}$ dependent $S_{11}$-parameter is largely changed by the magnitude of input capacitance as well as dominant pole and zero frequencies of input resistance. At $V_{gs}=0V$, the kink phenomenon occurs in the high frequency region because of very small phase difference of $S_{11}$-parameter and high pole frequency of input resistance. However, the kink phenomenon at higher $V_{gs}$ is generated in the low frequency region owing to large phase difference and low pole frequency.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.197-204
• /
• 2011

In this paper, There is a study of a smartphone-based App for e-learning when the process control of manufacturing. First, That is obtained the control limit lines after inputted by the measured data and able to look up the assignable causes and then can display those causes. A User of this App can access the record about assignable causes using the record menu and can use with an e-Learning tool. Because that were provided in the form of a control process theory and bulletin announcements. Helped to exchange information. In addition, the user's guide how to use this App. The result of this process control is provided by charts. The alarm message to the alertsymbol, depending on the level of color clearly was designed to UI which displays the results. After the questionnaire responses with respect to satisfaction of Utilization and satisfaction of the learning experience. The Utilization' satisfaction results Appeared that 82% of the participants were satisfied. And The learning's satisfaction results Appeared that 90% of the participants were satisfied.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.48-59
• /
• 2019

In recent years, the type of bridge where cables such as suspension bridge and cable-stayed bridge are the main factors in the construction of long-range bridges has been soaring. The effects of cables on these structures are very large, and for structural analysis, it is necessary to study the cable and the structural changes according to the mode characteristics of the cables. In particular, cables are directly connected to camber adjustment, which conveys load effects on girders to tower, and are important components in the overall structure, and since the initial tension on the construction is compared with the tension over time, this study was conducted to help identify the condition of the bridge's aging and abnormalities. Therefore, in this study, the characteristics of the mode from the mode analysis through the impact hammer to the mass of the cable and the change in the length of the cable are analyzed.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.115-125
• /
• 2016

The Bollinger Band indicating the current price position in the recent price action range is obtained by adding/substracting the simple standard deviation (SSD) to/from the simple moving average (SMA). In this paper, we first compare the characteristics of the SMA and the exponential moving average (EMA) in the operator's point of view. A basic equation is obtained between the interval length N of the SMA operator and the weighting factor ${\rho}$ of the EMA operator, that makes the centers of the 1st order momentums of each operator impulse respoinse identical. For equivalent N and ${\rho}$, frequency response examples are obtained and compared by using the discrete time Fourier transform. Based on observation that the SMA operator reacts more excessively than the EMA operator, we propose a novel exponential standard deviation (ESD) band centered at the EMA and derive an auto recursive formula for the proposed ESD band. Practical examples for the ESD band show that it has a smoother bound on the price action range than the Bollinger Band. Comparisons are also made for the gap corrected chart to show the advantageous feature of the ESD band even in the case of gap occurrence. Trading techniques developed for the Bollinger Band can be straight forwardly applied to those for the ESD band.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.165-179
• /
• 2004

With the spread of wireless internet, the interest in mobile applications and services is increasing. Korea Wireless Internet Standardization Forum has been establishing the standards for mobile platform and map service in the wireless internet environment. This study aims to present a paragon of mapping middleware that plays the role of broker for wireless internet map service: in particular, it focuses on the interoperability with generic map servers. In this study, we developed a method for applying current map servers to the wireless internet map service, and analyzed the request/response structure of the map servers which have different operation characteristics in order to allow our middleware to fully utilize the functionalities of the map servers. The middleware we developed is composed of .NET-based XML Web Services: it has a lightweight module for image map and a map representation module for choropleth map, symbol map, chart map, etc. This mapping middleware is a broker between mobile client and generic map server, and supports .NET clients and Java clients as well. Its component-based interoperability grants the extensibility for the wireless internet dedicated map servers of the future in addition to the current generic map servers.