• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2E
• /
• pp.83-91
• /
• 1994

Three components contribute to the acoustic field propagating in a wedge or over a ridge : a direct path arrival, an image component due to reflection from the boundaries and a component diffracted by the apex. All three contributions are included in a new, exact solution of the Helmholtz equation for the three-dimensional time harmonic field from a point source in a wedge(or over a ridge) formed by two intersecting, pressure-release plane boundaries. The solution is obtained by applying three integral transforms, and consists of and infinite sum of uncoupled normal nodes. The mode coefficients are given by a finite integral involving a Gegenbauer polynomial in the integrand, which may be computed relatively efficiently. Results of the theory for propagation over a 90 degree ridge is discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.19-24
• /
• 1995

단순한 형상의 소음기는 평면파이론에 의해 비교적 간단하게 음향성능을 해석적으로 구할 수 있다. 그러나 소음기의 형상이 복잡해지거나 해석하고자 하는 주파수의 범위가 평면파의 차단주파수 이상이 될 경우 소음기 내부의 음장이 평면파에서 벗어나게 되어 평면파 이론에 의한 해석은 실제와 상당한 오차가 발생하게 되므로 음장에 대한 3차원 해석이 필요하다. 이론적으로 3차원 문제를 해석할 수 있는 경우는 형상이 극히 단순한 경우에 국한되므로 유한요소법(FEM), 경계요소법(BEM)과 같은 수치해석적인 방법이 이용되고 있다. 경계요소법은 적분 커넬(kernel)의 특이성(singularity) 문제가 있지만 대상 영역의 경계면만을 이산화함으로써 모델링에 소요되는 시간과 노력을 절약할 수 있으므로 음향문제 해석에 있어서 효율적인 방법이라고 할 수 있다. 본 연구의 목적은 3차원 경계요소법 프로그램을 개발하고 평면파이론에 의한 해석이 어려운 여러가지 형태의 소음기에 대한 음향성능을 예측하고 실험으로 검증하는것이다. 특히, 단일영역으로 해석이 불가능한 다공형 소음기에 영역분할법을 적용하여 계산하고 결과를 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.592-599
• /
• 2002

In this study, an ultrasonic transducer was designed with a commercial finite element analysis (FEA) code, PZFlex, and fabricated based on the design. The transducer has the dimension and shape suitable for abdomen diagnosis working at 5 ㎒ and consists of 128 piezoelectric elements disposed in a convex linear array form. The transducer is composed of two impedance matching layers, one backing layer, and kerfs placed between the piezoelectric elements. Validity of the design with the FEA was illustrated through experimental characterization of a sample transducer. Comparison with the design results by equivalent circuit analysis method was also made to check the superiority of the FEA design.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.4
• /
• pp.26-33
• /
• 1993

The acoustic emission automatic detection system is developed to observe tree deterioration phenomena. Applying an alternating voltage of 15(kVnns) toXLPE tree specimens, many pulses of small amplitude are detected when the bush type tree developes branch type and a few pulses of high amplitude prcxluced as branch type propagated to bush type tree. Therefore, it is known that pulses having small amplitude operates as a destructive factor. It is observed that the skewness of the amplitude and the number of average pulses as distribution tendency of three dimension are characteristic quantity of AE pulses. As the trajectory of skewness is farther from the origin on the S-plane, it is more likely to breakdown.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2007

This paper presents a study on acoustic characteristics and sound generation mechanism of Cryptotympana atratas' songs which cause noise problems in summer days. The waveforms & FFT of Cryptotympana atratas' songs in nature were analyzed, and the actions of tymbals were visualized by the high speed camera. In order to know resonance frequency of the abdominal cavity of male Cryptotympana atrata, the sine sweep test was done. It was observed from the experimental results that Cryptotympana atrata's two tymbals act asymmetrically with respect to time & shape, and make a variety of frequencies every time it vibrates. It was also shown that Cryptotympana atratas' have a structure that cause resonances sounds only in a $7{\sim}7.5 kHz$ bandwidth.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.146-162
• /
• 2017

Multibeam and seismic data in the northwestern part of the Ulleung Basin were analyzed to study stratigraphy and evolutionary history of submarine canyon. A detailed analysis reveals that the sedimentary sequences in this area consist of four stratigraphic units separated by erosional unconformities. On the continental slope, these units are dominated by well-stratified facies with some slope failures, whereas these units show well-stratified and chaotic facies toward the basin floor. Generally, the sediment thickness is relatively thin on the slope, whereas thick sediment accumulation occurs on the base of slope and basin floor. Based on seismic characteristics and distribution, the deposition of each units are well correlated with the evolutionary history of the submarine canyon. Unit 1 directly overlying the acoustic basement has thin sediment layer on the slope, whereas its thickness gradually increase toward the basin floor. Compared to other units, Unit 2 is relatively thick accumulations on the slope and contains some slope failures related to faults systems. The mass transport sediments due to slope failures, mainly deposited on the base of slope as a submarine fan. The width and depth of submarine canyon increase due to dominant of the erosional process rather than the sediment deposition. Unit 3 is thin accumulation on the slope around the submarine canyon. Toward the basin floor, its thickness gradually increases. Unit 4 is characterized by thin layers including slides and slumps on the slope, whereas it formed thick accumulations at the base of slope as a submarine fan. The increase in the width and depth of submarine canyon results from the dominant of the erosional process and slope failures around the submarine canyon. Consequently, the formation of sedimentary units combined with the development of submarine canyon in this area is largely controlled by the amounts of sediment supply originated from slope failures, regional tectonic effects and sea-level fluctuations.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.333-339
• /
• 2004

This Paper proposes the vector quantizer-pyramid vector quantizer(VQ-PVQ) structure. Also both predictive structure and safety-net concept are combined into the VQ-PVQ to quantize the IPC parameter of wideband speech codec. The Performance is compared to the LPC vector quantizer used in the AMR-WB(ITU-T G.722.2). demonstrating reduction in both spectral distortion and encoding memory.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.222-225
• /
• 1993

일반적임 빔 형성기는 표적의 방위탐지가 가능하지만, 구조적인 특성상 대칭적인 빔을 형성하므로 표적의 좌/우 방위 구분이 불가능하기 때문에 표적의 정확한 방위를 탐지하고자 할 때 좌/우 구분이 가능한 빔 형성기가 필수적이다. 좌/우 분리 빔 형성 기법으로는 카디오이드(Cardioid) 빔 형성기법을 일반적인 빔 형성기에 적용시키는 방법이 최적으로 알려져 왔다. 그러나 좌/우 분리 빔을 형성하기 위해서는 많은 연산량과 하드웨어 설계에 대한 고려가 있어야한다. 본 논문에서는 좌/우 분리 빔 형성을 위하여 주파수 빔 형성기법과 카디오이드 빔 형성기법을 합성하여 적용하였다. 주파수 빔 형성 기법은 짧은 수행시간 동안에 표적의 정보추출을 위하여 고려되었으며, 카디오이드 빔 형성기법은 3개의 센서를 이용하여 센서의 기울기를 보상하여 수행하는 기법을 적용하였다. 또한 방향성 있는 시뮬레이션 신호를 생성하여 좌/우 분리 빔 형성 시뮬레이션을 수행하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.229-232
• /
• 1993

이 논문은 최근에 개발된 실시간 음성부 검출 알고리즘[1]을 TMS320C30 System board와 IBM PC486을 이용한 implementation에 관한 논문이다. 음성부 검출 알고리즘은 Energy와 LCR(Level Crossing Rate)를 이용하여 각 frame을 음성/묵음으로 분류하는 방법을 사용하였고 DSP 보드를 사용하여 한 frame이 입력되면 다음 frame이 입력되기 전에 그 frame에 대한 음성/묵음 분류를 하여 음성입력이 끝남과 동시에 음성이라고 판단되는 부분만을 DPS moemory상에 저장하므로 불필요한 memory의 낭비를 중이고 다음 단계의 음성처리를 위한 시간을 절약하였다. 이 알고리즘의 성능 평가를 위하여 Rabiner와 Sambur의 알고리즘과 한민수의 알고리즘과를 전문가가 수작업으로 찾아낸 결과와 비교 평가하였다. 알고리즘의 오차는 평균 남성 4.925ms, 여성 5.85ms로 1 frame 이내의 오차를 보였다.