• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.377-383
• /
• 2020

Digital signage is constantly being researched as new digital video platform to replace existing signage market. Traditionally, It conveys various information combining still images with text. Nowadays, it is rapidly exchanging to multi digital platform by high specificaton system, improvement of internet speed and advancement of video and audio compression technology with HTML5 technology. Not only a single wide-screen display but also the combination and adjustment of screens with setop box, OLED, media facades, and lase beam projectors are transformed into various forms to enable creative and diverse attempts for graphic designers. This study focuses on the application of motion graphics in rapidly evolving future platform - digital signage, and looking forward to help digital video content creator, researchers, and motion graphic designers.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.786-795
• /
• 1996

The fiber reinforced thermoplastics(FRTP) were prepared with polypropylene fiber(PP) as matrix and polyvinyl alchol(VF), aramid(KF) or polyamide fiber(PAF) as the reinforcing materials using the integrated fiber mixing apparatus. The reinforced thermoplastic sheets were prepared by com¬pression molding and their morphology, rheological and mechanical properties were characterized. In the morphological properties of composites, the wettability of the reinforced thermoplastics were decreased in proportion to the content of fibers. At low angular frequency, the viscosity of PAF /PP and VF/PP composite was increased with the content of reinforced fiber. However at high frequency the viscosity of composite reinforced with 5~20wt% fiber, was shown the reduced values which approaches that of the neat matrix. The mechanical properties of the composite were changed with the content of reinforecd fiber, and VF/PP and KF/PP composite had better properties than PAF/PP system.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.149-160
• /
• 2007

Six prototype field tests (five 1/8 and one 1/2 scale tests) have been conducted in order to determine the uplift resistance of deep foundation for transmission line structures. Test sites, located in the city of Eumseng in Choongbuk province, are classified as gneiss. These test results reveal failures not along the foundation-rock interface but either along the damaged surrounding rock mass caused by excavation or along the pre-existing rock joint. Test results also show the uplift resistance which is 20 $\sim$ 30% higher than the current design strength of side friction. In addition to fold tests, four concrete core samples between the liner plate and the surrounding rock mass have been obtained from the existing transmission foundations to study the effect of the liner plate which is installed prior to placing concrete. The compressive strength of these concrete core samples shows 63 $\sim$ 72% of the strength at the time of foundation construction. Side frictional resistance based on such less compacted concrete reaches satisfying uplift design strength.

• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.149-154
• /
• 2010

Interfacial evaluation was investigated for single-carbon fiber/phenolic and carbon nanotube (CNT)-phenolic composites by micromechanical technique and electrical resistance measurement combined with wettability test. Compressive strength of pure phenol and CNT-phenolic composites were compared using Broutman specimen. The contact resistance of CNT-phenolic composites was obtained using a gradient specimen by two and four-point methods. Surface energies and wettability by dynamic contact angle measurement were measured using Wilhelmy plate technique. Since hydrophobic domains are formed as heterogeneous microstructure of CNT in the surface, the dynamic contact angle exhibited more than $90^{\circ}$. CNT-phenolic composites exhibited a higher apparent modulus than neat phenolic case due to better stress transferring effect. Work of adhesion, $W_a$ between single-carbon fiber and CNT-phenolic composites exhibited higher than neat phenolic resin due to the enhanced viscosity by CNT addition. It was consistent with micro-failure patterns in microdroplet test.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.92-97
• /
• 2005

In this study, the effect of contact angles of PDMS and external voltage has been investigated. SU-8 (Microchem, USA) negative photoresist and PDMS are used to make the microchannel. The contact angle of the native PDMS is $105^{\circ}$. The native PDMS is treated with the oxygen plasma and the contact angle changes $19^{\circ}$, $46^{\circ}$ and $69^{\circ}$. As a result, the rate of increase in flow velocity is not directly proportional to the rate of increase of external voltage. This is because the electrical double layer is condensed and the zeta potential is increased with an increase of the external voltage. The flow velocity is highest for the contact angle of $19^{\circ}$ at the same external voltage. Hence we conclude that the thickness of electrical double layer and flow velocities vary with contact angle at the same external voltage.

• Information and Communications Magazine
• /
• v.11 no.10
• /
• pp.120-138
• /
• 1994

최근에 정보 고속도로 사업계획과 관련하여 세계 여러나라들이 실시하거나 실시 예정인 VOD 시험서비스에 많은 관심이 일고 있다. VOD서비스와 같은 대화형 TV 서비스(I-TV, Interactive-TV Service)는 컴퓨터, 통신 가전업체 그리고 영화 제작사등이 함께 참여하고 있다. 본 기고에서는 차세대 통합 멀티미디어 사업이라는 대화형 TV서비스의 개요와 요소기술, 그리고 서비스의 동향 및 전망을 알아보기로 한다. 1. 대화형 TV 서비스(Interactive TV Service)의 개요 현재까지 대부분의 TV 시청자들은 방송국으로부터 송신되는 공중파나 CATV서비스를 통해 프로그램 서비스를 받아보는 방송(broadcasting)방식 형태의 서비스를 이용해 왔다. 그러나 이러한 일방적인 수신방식은 최근 미국의 클린턴 행정부가 미국의 차세대 기반 통신망 구축 정책(정보 고속도로 사업; Information Super High-way)의 일환으로, CATV 사업자뿐만 아니라 지역 전화회사까지도 참여하고 있는 VOD(Video On Demand) 시험서비스가 시행됨에 따라서 미국은 물론, 우리나라를 비롯한 여러나라에서 대화형식의 TV서비스를 시행하려는 움직임이 일어나고 있다. 이러한 움직임은 지난 ‘92년 7월 16일 미 연방통신위원회(FCC. Federal Communication Committee)가 그동안 전화회사에 대해 CATV 시업진출을 금지하였던 정책을 바꿔서, CATV에 대항한 경쟁도입과 기반 정보통신망 정비를 목표로 하여 비디오 다이얼톤(VDT(주), Video Dial Tone)이라는 이름하에 공중통신 사업자에게도 영상신호를 전송을 인가함에 따라 시작되었다. VOD서비스와 같은 대화형 TV서비스는 가입자가 원하는 서비스를 시간에 관계없이 댁내의 통신회선(일반전화망, 케이블망, 광화이버망, 위성망)을 통해서 요구 즉시 실시간에 서비스를 받아볼 수 있는 멀키미디어의 통합서비스 방식이다. 도한 이 서비스는 음성통신과 방송의 통합형 서비스로서, 방송국, 전화회사 혹은 서비스 제공업자(ISP ; Information Service Provider)에 의해 제공된 디지탈 영상 및 일반 데이터 등을 압축하여 서버에 저장한 후, 소비자의 요청이 있을 경우에 통신회선을 통해 즉시 서비스 해준다. 이와 같은 대화형 TV 서비스의 구성요소로는 다양한 영상정보 및 데이타를 보유하고 있는 정보제공자, 전화선이나 CATV 또는 위성방송과 연결해 주는 지역별 비디오 서버 및 교환장치, 통신회선을 통해 전송된 서비스를 영상정보로 만들어주고 또한 가입자의 요구를 즉시 정보제공자에게 알려줄 수 있는 가정용 단말기 (STB. Set Top Box)로 이루어진다. 여기서, 비디오 서버는 다양한 대화형 TV 서비스를 제공해 주는 중계자로서, 영화, 홈쇼핑, 홈뱅킹, 대화형 교육, 비디오 게임 등을 가정에서도 가능하게 해 줄 뿐 아니라, 가입자를 관리하는 기능을 가지고 있어서 가입자 정보는 물론, 각종 서비스 사용료, 개인 통계자료 분석 등도 집계할 수 있는 기능을 가지고 있다.(그림1) 본 기고에서는 이러한 대화형 TV서비스 중에 대표적 응용서비스인 VOD 서비스에 사용되는 기술요소와 각국에서 진행되고 있는 VOD 서비스 동향 및 전망에 대해 알아보고자 한다. (주) VDT(Video Dial Tone) : FCC가 ‘92년 7월 16일에 인가한 지역 전화회사에 의한 가정용 영상 전송서비스 및 CATV에 대항한 경쟁도입과 Infrastructure의 정비를 목표로 하여 결정한 내용은 다음과 같다. 지역 전화회사에 대하여 (1) 공중통신사업자에 대하여 서비스 제공자에 대한 영상신호의 전송을 인가(기본서비스), (2) Video Gateway 서비스, 비디오 기기 제공, 서비스 제공사업자에 대한 과금, 요금징수 대행을 인가(고도서비스), (3) 프로그램 제공자에 대하여 자본출자율을 5%로 높이는 외에 (종래는 1%) 업무 관계의 확대(합병회사 설립 및 consultant 계약 등)를 인가. (4) Rural 지역(영업지역의회의 지방)에 대한 직접 프로그램 제공의 특별인가(주민이 1만세데 미만의 지방 공공 단체만 가능, 영업지역내에서는 제한없음), (5) 지방공공 사업체에 의한 영업면허의 불요(지역 전화회사가 직접 사용자에 서비스를 제공하지 않기 때문에 CATV 서비스로는 보지 않기 때문). (6)의 회로의 권고(케이블 정책법으로 결정되어 있는 통신사업자와 CATV회사 자본의 상호보유 금지의 해제) 등이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.613-621
• /
• 2016

This research connected network equipment, including CCTV, PAGA, IP-PBX, and Legacy, in order to enable the operation and configuration of internal IP-based network equipment in maritime plants and vessels, both in the field and from remote places, and to allow for the support of remotely controlling such equipment. It also realized an operating program for the integrated network equipment management system to enable the monitoring and control of equipment status, operation condition, and notifications from distant places. By applying the operating program to satellite stations and vessels sailing on the sea, a performance test was conducted to evaluate data loss and transmission/reception delay in the communication section between the land and vessels. As a result, this research verified the normal operation of CCTV control and of real-time monitoring and control of the network equipment, including PAGA, IP-PBX, and Legacy under the FBB and MVSAT environments. It was observed that the transmission of CCTV video images with a large volume of data as well as the transmission and reception of voice data were found to be slightly delayed, indicating the need to develop technology to compress and convert data for real-time transmission and reception.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.157-160
• /
• 2011

In this paper, poly (dimethyl siloxane) (PDMS) was modified using electron beam irradiation and its property was investigated. PDMS sheets prepared using a conventional thermal curing method were irradiated by electron beams at absorbed doses between 20 and 200 kGy and their properties were characterized using swelling degree and contact angle measurements, universal testing machine (UTM), thermogravimetric analyzer (TGA), and X -ray photoelectron spectrometer (XPS). The results of the swelling degree measurements, UTM, and TGA revealed that the swelling degree of the irradiated PDMS sheets was reduced down to 24% in comparison to the control sheet, and their compression strength and thermal decomposition temperature increased up to maximum 2.5 MFa and $10^{\circ}C$, respectively, due to the increase in crosslinking density by irradiation. In addition, on the basis of the results of contact angle measurements and XPS, the wettability of the PDMS sheets was enhanced up to 24% owing to the generation of hydrophilic functional groups on the PDMS surface by oxidation during electron beam irradiation.