• KOREAN POULTRY JOURNAL
• /
• v.49 no.4
• /
• pp.128-131
• /
• 2017

은(Silver)은 예부터 살균효과를 갖는 것으로 매우 잘 알려 왔다. 하지만 은 자체로는 이러한 효능을 극대화할 수 없어 은을 나노미터 단위의 미세한 입자를 안정적으로 만들어야 한다. 이것이 바로 은나노 기술의 핵심이다. (주)한국비앤씨(대표이사 김경채, 이하 한국비앤씨)는 미국 Ferro社(사)의 선진 기술을 도입하여 타 회사와 차별화된 은나노 기술력으로 부작용과 내성이 없는 은나노 향균제품으로 닭의 면역력 강화에 집중하고 있다. 이번호에는 한국비앤씨를 소개코자 한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.771-776
• /
• 2005

In recent days, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinfectant and biocidal material against coliforms and viruses. In particular, nano silted silver particles which can be used as effective biocidal material received more attention. Accordingly, it is important to investigate antimicrobial activity and mechanism of nano sized silver particles prepared in a cost-effective manner. In this study, nano sized silver particles were prepared via photoreduction of a silver salt ($AgNO_3$) in the bulk phase of $PEO_{20}-PPO_{70}-PEO_{20}$ (Pluronic 123) block copolymer The antimicrobial efficacy of silver nano particles against E. coli was investigated and compared with that of silver ion as the concentration of silver nano particles, pH ($5.6{\sim}8.2$), temperature ($4^{\circ}C{\sim}35^{\circ}C$) varied in aqueous system. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to examine the nature of damaged microorganism with nano sized silver particles and silver ion. This study showed that antimicrobial efficacy of silver nano particles was approximately one twentieth than that of silver ion. It was more biocidal at higher pH in contrast with silver ion. In addition, nano silver particles was demonstrated to disrupt the outer membrane of E. coli, subsequently causing their aggregation. On the other hand, silver ion diffused into the cell damaging the cytoplasmic membrane without disrupting the outer membrane of E. coli.

• Journal of Science and Technology Studies
• /
• v.13 no.2
• /
• pp.173-206
• /
• 2013

Launched by Samsung in 2003, nano-silver washing machines were a representative application of nanotechnology in commercial products until the US Environment Protection Agency (EPA) decided to regulate companies that produce nano-silver products in 2006. A year later, however, the EPA reclassified the washing machines not as an application of nanotechnology but as an ion-generating machine. As shown by the EPA's equivocation on this issue, establishing a category for nano-silver material should be considered in the procedure of risk assessment and regulation. This paper analyzes the controversy over Samsung's nano-silver washing machines more in detail to study how the demarcation between silver ion and nano-silver can vary according to the risk perception of nanotechnology. In Korea and the US, the boundary between silver ion and nano-silver was malleable and mobilzed depending on the contexts. Based on an analysis of the recent history of nano-silver washing machines, this paper explores the influence of risk perception over the ontological perspectives on a certain material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.276.1-276.1
• /
• 2016

본 연구에서는 차세대 유연 투명 히터 (Flexible and transparent heater) 제작을 위한 ATO 나노입자-은 네트워크 하이브리드 투명 전극의 특성을 연구하였다. 최적화된 은 네트워크 (Self-assembled Ag network) 투명 전극 상에 20-30 nm의 직경을 가지는 ATO (Sb-doped $SnO_2$) 나노입자를 스프레이 방식으로 상압, 상온에서 코팅하여 인쇄형 ATO-은 네트워크 하이브리드 투명 전극을 구현하였다. 스프레이로 코팅된 투명 ATO 나노 입자는 은 네트워크 전극의 빈 공간을 매워 줌으로써 은 네트워크 간의 연결성 및 표면 조도를 낮춰주어 유연 투명 히터 작동 시 전류의 집중 현상을 막아줄 수 있다. ATO-은 네트워크 하이브리드 투명 전극의 최적화를 위해 스프레이 횟수에 따른 하이브리드 투명 전극의 전기적, 광학적, 표면 특성을 분석하였으며, 최적의 조건에서 14 Ohm/square의 면저항과 66%의 투과도를 가지는 하이브리드 투명 전극을 구현하였다. 또한 FESEM 분석을 통해 ATO-은 네트워크 하이브리드 전극의 표면 및 계면 구조를 연구하고 ATO 코팅이 은 네트워크 전극의 특성에 미치는 영향을 규명하였다. 최적화된 ATO-은 네트워크 하이브리드 투명 전극을 이용하여 유연 투명 히터를 제작하고 전압에 따른 히터의 온도의 변화를 측정하여 차세대 유연 투명 히터용 투명 전극으로 인쇄기반 ATO-은 네트워크 하이브리드 투명 전극의 가능성을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.45-50
• /
• 2008

The self assembled silver process and silver coating process after surface reforming for silica particle, were investigated to coat the silver to colloidal silica. The effects of silver amounts and reductant amounts on silver coating efficiencies were investigated. The silver coating process after surface reforming for silica particle using MPTS (3-Mercaptopropyl trimethoxysilane) and APTS (3-Aminopropyl trimethoxysilane), showed the higher coating efficiency and better antibacterial effect than the self assembled silver process.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.62-70
• /
• 2017

A cyclone type electrolytic method was used to recover silver from thiourea-hydrochloric acid mixed solutions. The electrowinning behavior of silver was investigated in different systems, such as the flow rate, current density, silver concentration, thiourea concentration and hydrochloric acid concentration. As the increase of the flow rate, current density and hydrochloric acid concentration, the recovery rate of silver was increased. Whereas, as the increase of silver concentration, the recovery rate of silver was decreased. The thiourea concentration did not affect the Ag recovery and current efficiency. Above 99% of Ag was recovered at the flow rate of 12 L/min., current density of $0.75A/dm^2$, silver concentration of 1.0 g/L, 0.5 M thiourea and 0.1 M hydrochloric acid. In most experimental conditions, silver was recovered as a powder form.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.24-27
• /
• 1992

Silver sols are aggregated by a Cu or Zn rod. This is maybe due to the reduction of $Ag^+$ ion on the surfaces of silver sols to Ag metal by oxidation-reduction reaction with Cu or Zn metal. Raman spectra of silver sols aggregated by a Cu rod have been studied. The evidence of borate and nitrate ions adsorbed on silver colloid surfaces is found. It is also found that these ions adsorbed on silver colloid surfaces are easily replaced by adsorbated added.

• Journal of the Mineralogical Society of Korea
• /
• v.3 no.2
• /
• pp.98-108
• /
• 1990

전자현미분석외에 금-은 고용체의 금 또는 은 성분을 결정할 수 있는 간편하고도 신뢰성 높은 측정법 개발은 응용 광물학자들에게 오랜 연구과제가 되어 왔다. 이를 달성하기 위한 방법으로 정량적으로 측정할 수 있는 단위포 상수, 반사도, 비중, 미경도 측정연구를 실시하였다. 이 실험을 위해 순수한 원소 금과 은을 5 at.% 간격으로 혼합하여 시료를 제작한 후 석영관을 사용하여 진공하에서 밀봉하였다. 고온에서 가열하여 용융시킨 후 서냉하여 얻어진 반응물을 각종 현미경, X 선 회절분석기, 전자현미분석기, 반사도측정기, 비중저울, 미경도측정기를 사용하여 분석하였다. 직경이 114.6 nm 인 Debye-Scherrer 카메라를 사용해 얻은 X 선분말회절자료로 계산한 단위포 상수의 크기는 은함량이 증가함에 따라 일정하게 증가한다. 반사도 측정에는 480nm와 546nm 두파장을 사용하였는데 두 파장 모두에 대해 은 함량이 증가할수록 반사도가 증가한다. 또한 480nm를 사용했을 때의 반사도 변화가 현저하므로 유용하다. 비중은 은 함량이 증가할수록 오히려 일정하게 감소한다. 한편, 25g과 50g 추를 사용하여 측정한 미경도 값은 금-은고용체내의 성분변화에 관계없이 불규칙하게 변하여 어떤 경향을 나타내지 않는다.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.109-111
• /
• 1978

Three kinds of domestic summer grains, barley, naked-barley & wheat were used for the assessment of ash, protein, fat, crude fiber, calcium, iron & thiamine contents in the grain-pearling and flour-milling processes at the 60%, 70%, 80%, 90% yield bases and the following results were obtained. 1) Ash, protein, fat, crude fiber, calcium, iron & thiamine contents of milled grains were proportional to the milling yield in grain-pearling and flour-milling processes. 2) In the case of pearled barley, the average content of ash was 0.83%, protein was 1.31%, fat was 0.40%, crude fiber was 0.75%, calcium was 3.03mg%, iron was 2.40mg% and thiamine was 0.14% lower than the barley flour at the same level of milling yield. 3) In the case of pearled naked-barley, the average content of ash was 0.41%, protein was 1.96%, fat was is 0.33%, crude fiber was 0.84%, calcium was 4.54mg%, iron was 1.19mg% and thiamine was 0.10mg% lower than the naked-barley flour at the same level of milling yield. 4) In the case of pearled wheat, the average content of ash was 0.28%, protein was 2.25%, fat was 0.05%, crude fiber was 0.25%, calcium was 4.31mg%, iron was 0.12mg% and thiamine was 0.15mg% higher than the wheat flour at the same level of milling yield.

• Journal of Acupuncture Research
• /
• v.22 no.1
• /
• pp.191-201
• /
• 2005

Objective : The purpose of this study is to arrange the literature about a acupuncture therapy on the knee rheumatoid arthritis. Methods : We arrange fifty kinds of literature about a acupuncture therapy of knee joint, knee arthritis, Results : Acupucture point at G30, G34, S36, LI11, B4O, G39, G38, LI4 used frequently for the acupuncture therapy Conclusion : B, G, S, Sp of merdians used frequently for the acupuncture therapy.