• Information and Communications Magazine
• /
• v.20 no.8
• /
• pp.14-20
• /
• 2003

인터넷에 대한 의존성이 증가하면서 온라인상에서도 다양한 형태의 사이버 위협이 상존하고 있으며, 특히 시스템의 취약성을 공격하는 해킹방식은 대규모의 트래픽을 발생하여 네트워크 자체에 대해 큰 위협이 되고 있다. 지난 1.25 인터넷 침해사고 이후 전역통신망 차원에서의 네트워크에 대한 침입을 능동적으로 탐지하고 대응할 수 있는 고성능 네트워크 정보보호시스템 개발이 절실히 요구되고 있는 실정이다. 본 고에서는 세계의 네트워크 기술과 보안 기술 발전 추세에 발맞추어 추진 중인 정책 기반의 실시간 침입 탐지, 대응 및 예측 기능이 복합적으로 융합된 종합 솔루션인 NGSS에 대해서 기술개발 추진의 타당성, 시스템의 주요 특징을 소개하고자 한다.

• Convergence Security Journal
• /
• v.20 no.5
• /
• pp.3-10
• /
• 2020

Recently, the Internet and networks are regarded as essential infrastructures that constitute society, and security threats have been constantly increased. However, the network switch that actually transmits packets in the network can cope with security threats only through firewall or network access control based on fixed rules, so the effective defense for the security threats is extremely limited in the network itself and not actively responding as well. In this paper, we propose an in-network security framework using the high-level data plane programming language, P4 (Programming Protocol-independent Packet Processor), to deal with DDoS attacks and IP spoofing attacks at the network level by monitoring all flows in the network in real time and processing specific security attack packets at the P4 switch. In addition, by allowing the P4 switch to apply the network user's or administrator's policy through the SDN (Software-Defined Network) controller, various security requirements in the network application environment can be reflected.

• Journal of Technology Innovation
• /
• v.24 no.2
• /
• pp.1-20
• /
• 2016

This case is to analyze the structure of technology convergence with social network analysis. More specifically, the convergence structure among input technologies mediated with products is analyzed with 2-mode social network analysis. Products are identified in project's goal and coded as the Korea Standard Industrial Classification. The input technologies are coded as the National Science Technology Classification. The subjects were 401 R&D projects applied to '2012 Convergence Technology Development Project for Small and Medium Businesses' promoted by Korea Technology & Information Promotion Agency for Small and Medium Enterprises. IT sectors had the structure of a particular input technology connected to many products, BT sectors also had a few input technology connected to many products but most were connected to specific products. Therefore We have realized that each convergence area had different convergence structure. There were the difference of connectivity centrality between input technologies and input technologies mediated with products. For IT sectors, the embedded S/W were the highest in both cases. For BT sectors, functional cosmetic development and fermentation technology were the highest in input technologies but fermentation technology was not the highest in input technologies mediated with products. This case defines the convergence based on the real projects and the use for managing and planing projects. Therefore, this case was to make a tool to analyze and design technology convergence projects.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.415-428
• /
• 2010

Converging technologies have become a major issue in science policy. This paper describes the current state of scientific collaboration for convergent technologies among researchers in South Korea, by conducting Social Network Analysis (SNA) with the data set of 1,095 researchers who have involved in the development of the convergent technologies. It is found that the researchers in convergent technology are more productive than the researchers in other technology domains. However, the researchers in convergent technologies have small number of collaborators, compared with their productivity. Only a few researchers have a role of the hub in the collaboration networks, meaning that the structure network is closer to than the core than the peripheral. The scientific collaboration network of the convergent technology researchers shows that the members of the network are close to each other, but there is small number of cliques.

• Broadcasting and Media Magazine
• /
• v.8 no.4
• /
• pp.108-123
• /
• 2003

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2008

This paper considers the multi-objective optimization of a multi-service arrayed waveguide grating-based single-hop WDM network with the two conflicting objectives of maximizing throughput while minimizing delay. This paper presents a genetic algorithm based methodology for finding the optimal throughput-delay tradeoff curve, the so-called Pareto-optimal frontier. Genetic algorithm based methodology provides the network architecture parameters and the Medium Access Control protocol parameters that achieve the Pareto-optima in a computationally efficient manner. The numerical results obtained with this methodology provide the Pareto-optimal network planning and operation solution for a wide range of traffic scenarios. The presented methodology is applicable to other networks with a similar throughput-delay tradeoff.

• Convergence Security Journal
• /
• v.13 no.1
• /
• pp.59-70
• /
• 2013

Along with the rapid development of the wireless network (Wireless Network) technology for secure wireless communications, security problems have emerged as an important issue. In order to operate the wireless network intrusion detection system detects the agent installed on each wireless node should be. Ad-hoc network structures scattered in the AP over a wireless network without the node is a structure that makes it possible to communicate to connect. Intrusion detection agent to be installed on the node, and the corresponding energy consumption occurs when the survival time is reduced. On a node that can monitor a lot of traffic in order to increase the effect of intrusion detection, an intrusion detection agent should be placed. Therefore, in this paper, by taking advantage of the structure of Ad-hoc wireless network, considering the maximum living time of the network, while at the same time, the effectiveness of intrusion detection and intrusion detection by proposing a plan for installing the agent. Also improve the system performance by reducing the network load on each network, a system designed for data aggregation to reduce data redundancy, network energy consumption by reducing.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.37-43
• /
• 2018

Science DMZ is a network architecture that considers complicated network components such as dedicated network, DTN, and minimum security policy to maximize transfer efficiency. And DTN tuning is an essential component to take full advantage of Science DMZ's available bandwidth. In addition, tuning of network system should be performed concurrently to minimize packet loss due to network bottleneck. In this paper, we propose a tuning method of data transfer node and network system for maximizing transfer efficiency in Science DMZ network architecture. As a result of the performance measurement using the KREONET, the network performance after the DTN tuning shows 180% improvement than that of existing method without DTN tuning. In addition, performance of 9.4Gb/s was shown without loss of performance measurement after tuning network system applying shaping policy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.141-146
• /
• 2008

Recently, it is studying to provide to users through internet in the SensorWeb of OGC(Open Geospatial Consortium) saving and maintaining data and image information gathered from sensor network. It is necessary to study about data convergence as binding audio and video for delivering the sensing data and image information to users with real-time system. In this article, it suggests how to convergence sensing data and moving picture collected from the sensor network using index. This program indicates both of them that collected sensing data and information identified of moving picture in the integration index and based on this program provides sensing data moving picture at the same time referencing integration index, if the user asks. To verify suggested method designing real-time multimedia service structure using sensor network and image installation and implementing Ubiquitous realtime multimedia system integrating moving picture and sensing data based on index. As a result of this program, it is confirmed providing real-time multimedia service to request information of application service using integration index collected image and sensing data from wireless sensor network and image installation suggested data convergence method.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.68-76
• /
• 2022

The purpose of this paper was to design the cable networks for mesh reflector antennas, considering the flexibility of structures. An effective form-find methodology is proposed. The whole parts of the cable networks are described by the absolute nodal coordinate formulation. Additionally, nonlinear deformation of the cable can be obtained. The form-finding analysis of the reflector with standard configuration is performed, to validate the proposed methodology. The truss ring structure is numerically modeled using the frame elements. To consider the flexibility of the truss ring as well as the cable net structure, an iteration analysis between the truss ring and the cable net under tensional forces is also performed in the form-finding process. The finial configuration of the reflector with tensioned cable networks is demonstrated.