• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1465-1471
• /
• 2008

This study was carried out to make water-soluble tocopherol emulsion which can be applicable directly in water. The molecular weight of tocopherol was 340 to 360 and tocopherol emulsion model was decided as O/O/W/W type. In correlation between stability of emulsion and surface tension, the stability in surface tension of emulsion was from 40 to 46 dyne/cm. In the case of lower than 40 dyne/cm of surface tension, the stability of the emulsion was lower. Lipophilic surfactants, especially for a polyglycerine polyricinoleate in 20%, 30% and 40% tocopherol emulsion, was the most effective in emulsion stability. A higher stability of the emulsion among hydrophilic surfactants in the tocopherol emulsion was obtained in the following order; polyglycerine monostearate> polyglycerine monooleate> polyoxyethylene (20) sorbitan monooleate$\geq$ polyoxyethylene (20) sorbitan monolaurate.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.657-661
• /
• 2003

Pseudomonas aerugenosa BYK-2로부터 분리해낸 biosurfactant는 0.05% NaCl. pH 5에서 비교적 우수한 유화안정성을 보였고, pH 및 이온강도가 증가함에 따라 유화능 및 유화안정성이 감소하는 경향을 보였다. 생물유화제를 각 농도별로 첨가하여 어육소세지의 물성을 조사한 결과 0.1 % 첨가구가 deformation 9.45 mm, force는 119.2 g으로 다른 첨가구에 비해 높은 수치를 나타낸 반면, whiteness는 생물유화제를 첨가하지 않은 것에 비해서 점차 감소하는 경향을 나타내었다. 또한 천연 유화물과 타 유화제의 첨가에 따른 어육 소세지의 물성에 대한 효과를 알아보기 위해 각각 또는 복합적으로 첨가하여 물성과 색차를 측정한 결과 천연유화물의 고유한 색깔로 인해 whiteness는 감소하였으나, deformation이 다른 유화제에 비해서 월등히 증가하는 경향을 보였고, force 값 또한 증가하는 경향을 보였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.1
• /
• pp.118-122
• /
• 1996

난황을 이용한 유화식품인 마요네즈 제조시 천연고분자 물질인 chitosan의 사용가능성을 조사하기 위하여 난황의 유화력과 유화 안전성에 미치는 chitosan의 효과와 마요네즈 제조시 chitosan 첨가특성을 조사하였다. Chitosan을 난황 무게에 대해 0.1% 첨가한 결과난항의 유화력은 약 10%증진되었으며 유화 안정성은 뚜렷이 증진되었다. 마요네즈 제시 0.1% chitosan 첨가에 의해 마요네즈의 유화 안정성을 증가되었으며 대조구의 첨가 대두유에 비해 40% 증량 처리구에 있어 유화 안정성 및 점도는 대조구에 비해 우수하였으며 색택은 비슷한 경향을 나타내었다. 마요네즈의 퍼짐서, 점성, 맛, 종합적 기호도에 관한 기호성은 0.1% chitosan 첨가구가 대조구에 비해 양호하였으며, 40% 증량한 경우 더욱 우수하였으며 60% 증량한 겨웅 대조구와 유사하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.158.2-158.2
• /
• 2010

본 논문은 정부의 연구 지원에 의해 폐유를 유화 방법으로 재활용한 유화정제연료유의 저장안정성 측정방법을 마련하고자 실시하였다. 국내외 유화정제연료유 저장안정성 시험방법이 마련되지 않아 ASTM D 3707, 지식경제부 '석유대체연료의 성능평가기준과 품질시험방법 등에 관한 고시' 별표4 유화연료유 저장안정성 평가방법(습식법) 등 유화연료유의 저장안정성 시험방법을 근간으로 하여 $40^{\circ}C$에서 30일 동안 저장용기에 저장하면서 매 10일 마다 상 하층 수분함량을 측정하는 방법을 제시하였고, 이에 대한 전반적인 연구 내용을 언급하였다.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.3
• /
• pp.197-215
• /
• 2003

This study was carried out to investigate the effects of added emulsifier and enzyme on the quality characteristics of Seolgiddeok with black rice powder, green tea powder, Lentines edodes powder, pumpkin powder during storage. Samlpes were divided into two groups, the emulsifier-enzyme added group and the control, and stored fur 4 days at 2$0^{\circ}C$. Moisture content was measured by the air oven method; the Hunter's cole. values by Lightness (L), redness (a), yellowness (b) value; the degree of gelatinization by the enzyme digestion method, and expressed as glucose content by Somogi-Nelson method. The degree of retrogradation was calculated as the retrogradation rate using the degree of gelatinization value, and total cell and mold counts were also measured. Texture and sensory characteristics were also investigated. The results are as follows: The emulsifier-enzyme group was significantly different from the control from each examination and the retrogradation of pumpkin Seolgiddeok with emulsifier-enzyme was delayed the most among samples tested.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.152-156
• /
• 1992

A study was condoled to investigate the effects of phosphate salts $(Na_2HPO_4\;and\;K_2HPO_4)$ on the emulsion stability of soy protein isolate (SPI) in terms of the salts concentration and addition order. When phosphates were added before emulsification, emulsion stability (ES) of SPI was improved at the concentration of 10 mM, while ES was decreased by addition of phosphates after emulsification. At high phosphate concentrations, ES of SPI was decreased by the addition of phosphates, regardless of the addition order. ES of SPI at the isoelectric point (pH 4.5) or in the presence of $CaCl_2$ was greatly enhanced by the phosphates. In both cases, the overall ES profile was found to be nearly similar to the solubility profile of SPI, indicating the positive relationship between solutibility and emulsion stability of SPI.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.423-428
• /
• 2003

Stabilities of W/O emulsions containing eugenolchitosan (EuCs) prepared from chitosan and eugenol were compared to determine the optimal conditions for the ratio of water (core phase) to corn oil (continuous phase), the concentration of EuCs, storage temperature, and the extent of homo-mixing. The optimal ratio of water to corn oil was 2:3 (w/w). The effects of EuC concentrations, and singular vs. binary system of emulsifiers on the storage stability of the emulsion were investigated with EuCs and polyoxyethylene sorbitan monolaurate. The emulsion was stable, showing more than 95% emulsion stability index (ESI) value, when the concentration of EuCs was more than 0.18% (w/v). ESI value of binary emulsifier system was almost equal to that of singular emulsifier system at the concentration of 0.18% (w/v). At this singular emulsifier system, the W/O emulsion formed by EuCs had ESI value of 100%. The optimal concentration of EuCs was determined as 0.18% (w/v). The highest stability of the emulsion was obtained from the homo-mixing at 11,000 rpm for 10 sec and the storage temperature ranging $25{\sim}65^{\circ}C$. EuCs produced from this study was mutagenecity-negative on Ames test and contained no heavy metal ions.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.527-531
• /
• 2016

Emulsification is a fundamental process of cosmetics manufacture which produces stabilized emulsion by dispersing the liquid from the one side to the other by adding an emulsifier in an immiscible liquid. Various types of emulsifiers can produce various cosmetics. In this study, we evaluated the stability of emulsifier by measuring variations in the viscosity, particle size and particle size distribution. HLB values of nonionic emulsifiers which are used in this paper are 12.9, 12.9, 12.6 and 12.5 for EMU-01, EMU-02, EMU-03 and EMU-04, respectively. All types of emulsions showed an increase in the particle size and a decrease in the viscosity with the time. Also they showed a decrease in the particle size and an increase in the viscosity with respect to increasing the stirring speed. However, the stability of emulsions up to 56 days was secured by observing the non-separation of emulsions. In addition, the viscosity of the emulsions was measured in the order of EMU-01 > EMU-02 > EMU-03 > EMU-04 while the size of particles was measured in the order of $EMU-01{\approx}EMU-02$ > $EMU-03{\approx}EMU-04$. This indicates that our emulsion can be potentially used for preparing a cosmetic facial cream.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.670-678
• /
• 2017

Self-emulsifiable polyethylene (PE) wax was prepared using acrylic acid grafted PE wax with potassium hydroxide and various emulsifiers for the economic production of PE wax emulsion. Modification reaction completion was confirmed that the peak from carbonyl group of acrylic acid disappeared and the new peak from carboxylic acid salts appeared in the FT-IR (Fourier transform infrared) spectrum data. Self-emulsifiable properties of the modified PE wax were investigated by the emulsion size and the stability of wax emulsion without any additional emulsifiers. According to self-emulsifiable properties, the emulsion size and stability were varied on the concentration and structure of the emulsifier. The greater emulsion concentration and hydrophilic poly(ethylene oxide) (PEO) characteristics of the emulsifier resulted in the smaller emulsion size and better emulsion stability. In addition, the use of emulsifiers mixture was more effective to obtain smaller size and uniform distribution of emulsion than that of single emulsifier in PE wax modification reaction. Especially, modified PE wax with OAE-5 and LAE-15 emulsifiers mixture shows excellent performance in terms of the smallest emulsion size ($4.34{\mu}m$) and emulsion stability.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.440-445
• /
• 2018

In this study, the stability of O/W cosmetic facial cream emulsions according to HLB values was evaluated by mixing nonionic surfactants, such as Brij 78&72 and Brij 98&92. Brij 78&72 (steareth-20&steareth-2, EMS-01), saturated fatty acid, and Brij 98&92 (oleth-20&oleth-2, EMS-02), unsaturated fatty acid, were used as mixed surfactants. The stability of the O/W emulsion was evaluated by using the emulsion viscosity, particle size, particle size distribution, and zeta-potential. The viscosity of the emulsion increased with the increase of time for EMS-01 while that of EMS-02 decreased with the increase of HLB value. The particle size of both EMS-01 and EMS-02 increased with time. The emulsifier with a HLB value of 10.8, which is the most similar to the required HLB value of mineral oil, 10.5, had the smallest particle size and highest density and also showed the highest emulsion stability. The zeta-potential of both emulsions tended to increase with the HLB value. No significant changes were observed in emulsions of the HLB value of 10.8 or more. The saturated fatty acid system, EMS-01, exhibited a higher zeta-potential value than that of the unsaturated fatty acid EMS-02 and also was superior in the stability.