• Title/Summary/Keyword: 유한체적기법

Search Result 179, Processing Time 0.033 seconds

Propagation Analysis of Dam Break Wave using Approximate Riemann solver (Riemann 해법을 이용한 댐 붕괴파의 전파 해석)

  • Kim, Byung Hyun;Han, Kun Yeon;Ahn, Ki Hong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.5B
    • /
    • pp.429-439
    • /
    • 2009
  • When Catastrophic extreme flood occurs due to dam break, the response time for flood warning is much shorter than for natural floods. Numerical models can be powerful tools to predict behaviors in flood wave propagation and to provide the information about the flooded area, wave front arrival time and water depth and so on. But flood wave propagation due to dam break can be a process of difficult mathematical characterization since the flood wave includes discontinuous flow and dry bed propagation. Nevertheless, a lot of numerical models using finite volume method have been recently developed to simulate flood inundation due to dam break. As Finite volume methods are based on the integral form of the conservation equations, finite volume model can easily capture discontinuous flows and shock wave. In this study the numerical model using Riemann approximate solvers and finite volume method applied to the conservative form for two-dimensional shallow water equation was developed. The MUSCL scheme with surface gradient method for reconstruction of conservation variables in continuity and momentum equations is used in the predictor-corrector procedure and the scheme is second order accurate both in space and time. The developed finite volume model is applied to 2D partial dam break flows and dam break flows with triangular bump and validated by comparing numerical solution with laboratory measurements data and other researcher's data.

A Study on Unsteady Free Surface Flow Simulation Using Two-Dimensional Finite Volume Method (2차원 유한체적법을 이용한 비정상상태 자유수면 모의에 관한 연구)

  • Jeong, Woo-Chang;Hwang, Man-Ha
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.664-668
    • /
    • 2008
  • 본 연구에서는 비정상상태 자유수면 모의를 위해 2차원 유한체적법을 이용한 수치모형을 개발하였으며, 이론적인 해석해 및 수리실험을 통한 실측자료를 이용하여 검증하였다. 개발된 모형은 지배방정식으로 비선형 및 보존형 2차원 천수방정식(shallow water equation)을 이용하였으며, 동적메모리 할당 기능이 포함된 Fortran-90으로 코딩되었다. 또한 구조화된 격자 및 비구조화 격자 시스템에도 적용될 수 있도록 모형을 구성하였으며, 불규칙한 하상지형에 의해 수치진동을 감소시키기 위해 본 모형에 well-balanced HLLC 기법을 적용하였다. 모형의 적용성을 검증하기 위하여 1차원의 경우 젖은/마른 하상 조건하에서의 댐 붕괴파 문제와 하상이 변화하는 지형 구간을 통과할 때 발생되는 천이류에 대한 문제 그리고 시간에 따라 변화하는 수위와 지형 조건에서의 wetting & drying에 대한 문제에 적용하였으며, 2차원의 경우 전통적인 댐 붕괴파 문제 및 구조물에 미치는 댐 붕괴파의 영향에 대한 수리모형실험을 통한 실측자료를 이용하여 검증하였다. 검증결과 본 모형을 통해 계산된 수치해는 이론적인 해석해와 실측자료에 거의 정확히 일치하였으며, 향후 실제 하천 자료를 이용하여 모형의 현장 적용성을 검증할 것이다.

  • PDF

Failure Analysis of RC Cylindrical Structures using Layered Shell Element with a Pressure Node (압력절점을 갖는 적층쉘 요소에 의한 콘크리트 원통형 구조물의 파괴해석)

  • 송하원;방정용;변근주;최강룡
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.12 no.3
    • /
    • pp.475-484
    • /
    • 1999
  • 압력절점은 요소의 균등한 압력증분을 1개의 자유도로 갖는 절점이며, 유한요소의 하중-변위 평형방정식에 체적과 압력의 관계를 추가하여 한계압력 이후에서도 체적변화에 따른 압력증분을 직접적으로 제저할 수 있는 절점이다. 본 연구에서는 철근콘크리트의 평면 구성 방정식과 적층정식화에 적용한 쉘 요소에 압력절점을 추가하고 해석시 체적을 제어함으로써 철근콘크리트 원통형 구조에 대해 파괴까지의 극한내압 능력을 해석할 수 있는 체적제어 비선형 해석기법을 개발하였다. 본 논문에서 제안한 해석기법을 이용하여 철근콘크리트 원통형 구조물에 대하여 비선형 해석을 수행하여 한계압력과 한계압력 이후의 구조물의 거동을 예측하였으며 실험결과와 비교 검증하였다.

  • PDF

A Study on the Level-Set Scheme for the Analysis of the Free Surface Flow by a Finite Volume Method (유한체적법에 의한 자유수면 유동해석에서 Level-Set 기법에 대한 연구)

  • Il-Ryong Park;Ho-Hwan Chun
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.36 no.2
    • /
    • pp.40-49
    • /
    • 1999
  • A Finite Volume Method for the two-dimensional incompressible, two-fluids Navies-Stokes equation and level-set scheme are used to analyse the interface of two fluids, free-surface flow. The numerical characteristics and the applicability of level-set scheme are brief1y investigated and appraised by solving oscillating small surface wave in a water tank and dam break problems. In the numerical results, a method for improving the convergence of the solution is presented.

  • PDF

Two-Dimensional Finite-Volume Unsteady-Flow Model for Shocks (충격파 모의를 위한 이차원 유한체적 비정상 흐름 모형)

  • Lee, Gil-Seong;Lee, Seong-Tae
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.3
    • /
    • pp.279-290
    • /
    • 1998
  • The height and speed of the shock wave are critical data in flood-control operations or in the design of channel walls and bridges along rivers with high flow velocities. Therefore, a numerical model is needed for simulating flow discontinuity over a wide range of conditions. In this study, a governing equation. As a Riemann solver Roe(1981)'s one is used. The model employs the modified MUSCL for handling the unstructured grids in this research. this model that adopts the explicit tradditional twl dimmensional dam break problems, two hydraulic dam break model is simulations, and a steady state simulation in a curved channel. Conclusions of this research are as follows : 1) the finite volume method can be combined with the Godonov-type method that is useful for modeling shocks. Hence, the finite volume method is suitable for modeling shocks. 2) The finite volume model combined with the modified MUSCL is successful in modeling shock. Therefore, modified MUSCL is proved to be valid.

  • PDF

The Effect of the Volume of the Cellular Bulkhead on the Yield Load (셀 구조물의 항복하중에 미치는 체적의 영향)

  • Jang, Jeong-Wook;Kim, Hyun-Guk;Lee, Jae-Seok
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.27 no.4
    • /
    • pp.197-201
    • /
    • 2015
  • Experimental and numerical analysis has been carried out in this paper to understand correlation between volume and yield of cellular bulkhead. It was firstly confirmed from these results that the conditions and parameters considered in the finite element analysis were reasonable and realistic due to the fact that the yield loads determined by the two different methods were equivalent in actual. Based on this results, a series of intensive numerical analysis has been further performed and revealed that the yield load varied in direct proportion to the change in the volume of the cellular bulkhead.

Development of nearshore sediment transport numerical model based on GPU engine (GPU 엔진 기반 연안의 실시간 유사이송 수치모형 개발)

  • Noh, Junsu;Son, Sangyoung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.177-177
    • /
    • 2022
  • 기후변화 및 해안 구조물의 증가 등 여러 원인이 연안침식 및 해안선 변화와 같은 연안의 지형변화를 가속하고 있다. 빠르게 변화하는 연안의 지형변화예측 및 대응책 강구를 위해서는 연안의 유사이송 현상에 대한 신속한 예측이 필요하다. 본 연구에서는 GPU 엔진 기반 파랑해석모형인 Celeris Advent를 활용하여 실시간으로 연안의 유사이송 모의가 가능한 수치모형을 개발하였다. Celeris Advent는 GPU의 병렬코어를 활용해 실시간 연산과 GUI를 통한 사용자와의 실시간 상호작용이 가능한 모형이다. 지배방정식은 확장형 Boussinesq 방정식에 유사이송방정식을 양방향 결합하여 구성하였고, 지배방정식에는 하이브리드 유한체적-유한차분 수치기법을 적용하여 이송항은 유한체적법(Kurganov & Petrova, 2007), 소스항은 유한차분법을 통해 이산화하여 해석한다. 유사이송방정식은 수심적분형 이송확산방정식에 침식 및 퇴적 플럭스를 반영하는 소스항을 결합하여, 이송항 및 확산항을 통해 유사의 이송/확산을 고려함과 동시에 소스항을 통해 하상과의 상호작용을 고려하였다.

  • PDF

A Study on Simulation of Dam-break Wave Using Two-dimensional Finite Volume Model (2차원 유한체적모형을 이용한 댐 붕괴파 모의에 관한 연구)

  • Jeong, Woo-Chang;Park, Young-Jin
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.3
    • /
    • pp.249-262
    • /
    • 2011
  • In this study, in order to reduce the numerical oscillation due to the unbalance between source and flux terms as the HLLC scheme is applied to the flow analysis on the irregular bed topography, a unstructured finite volume model based on the well-balanced HLLC scheme and the shallow water equations is developed and applied to problems of dam-break waves. The well-balanced HLLC scheme considers directly the gradient of bed topography as the flux terms is calculated. This scheme provides the good numerical balance between the source and flux terms in the case of the application to the steady-state transcritical flow. To verify the numerical model developed in this study, it is applied to three cases of hydraulic model experiments and a field case study of Mapasset dam failure (France). As a result of the verification, the predicted numerical results agree relatively well with available laboratory and field measurements. The model provides slightly more accurate results compared with the existing models.

Numerical Analysis of Two-dimenstional Flow in Curvilinear Coordinate System (곡선좌표계에서의 2차원 흐름의 수치해석)

  • Kim, Hyung-Jun;Cho, Yong-Sik;Kim, Su-Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.402-407
    • /
    • 2006
  • 본 연구는 곡선좌표계에서 유한차분기법(finite difference method)을 이용하여 2차원 흐름이 모의가능한 수치모형을 개발하는 것이다. 기존의 연구는 대부분 직교좌표계(cartesian coordinate system)에서의 격자망을 대상으로 개발되고 적용되었기 때문에 불규칙한 흐름의 경계 및 형상을 올바로 표현하기 어려웠다. 유한요소법이나 유한체적법같은 수치모의기법들이 개발되어 비구조격자체계를 구성하고 자연현상에 가까운 경계 표현할 수 있도록 개발되었다. 하지만 위의 기법들은 질량과 운동량과 같은 물리량을 보존하기 위해서 매우 조밀한 격자체계를 가져야만 한다. 이에 본 연구에서는 기존의 문제점들을 해결하기 위하여 곡선좌표계(curvilinear coordinate system)를 이용하여 지배방정식을 표현하고 2차원 흐름을 모의할 수 있는 모형을 구축한다. 수치모형은 leap-frog기법과 1차 정확도의 풍상차분기법(upwind scheme)을 사용하여 구성하였다. 본 연구에서 개발된 모형을 사각수조 및 만곡수로흐름에 적용하여 모의결과를 해석해 및 실험관측값과 비교하였다. 이로부터 본 수치모형이 해석해 및 실측치와 잘 일치하고 있음을 알 수 있었다.

  • PDF