• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.245-249
• /
• 2007

The objective of the UAV removes the life loss of the pilot who is the maximum weak point of the manned reconnaissance aircraft, accomplishes the reconnaissance it is an aircraft for. The camera which will confirm the pilot substitution reconnaissance result which stands is necessary, we should confirm; the target which this camera probably is what. The report which described like this demand condition against the consideration fact which is necessary to the selection of the image sensory device which is a camera which with character will be applied in UAV.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.530-536
• /
• 2018

Recently, many studies for interoperability of UAV in the NAS has been performed since the application range and demand of UAV are continuously increased. For the interoperation of UAV in the NAS, technical standards and certification system for UAV which is equivalent to the commercial aircraft are required and test and evaluation methodology must be presented by standards. In this paper, qualification test and evaluation methodology aboutfor the UAV navigation system is proposed. For the research, the mission profile and operation environment of UAV were analyzed. Thereafter the test criteria were derived and the test methodology were established. Finally, the simulation and demonstration using test-bed UAV were performed. As a result of the test, it was confirmed that the navigation system of test UAV has a position accuracy about 1.4 meters at 95% confidence level in the entire flight stage.

• Defense and Technology
• /
• no.6 s.172
• /
• pp.58-63
• /
• 1993

개인 휴대용 방공 무기체계의 야전배치는 항공기 및 헬기에 대한 자체방어 능력을 강화시켜 줍니다 제3세대 가시선 통제 유도 시스템의 휴대용 미사일은 다른 화기나, 현재 운용중인 적외선 유도미사일보다 가격이 저렴하며, 보다 유용하고 효과적입니다

• 한국항공운항학회:학술대회논문집
• /
• 2007.06a
• /
• pp.34-37
• /
• 2007

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.163-172
• /
• 2020

Flight data recorder (FDR) for accident investigation is required to comply with EUROCAE(ED-112) standard so that flight data can be restored when exposed to extreme conditions due to aircraft crash. Since the ED-112 standard defines the general requirements for all aircraft, it is essential to analyze detailed requirements for FDR software to apply appropriate requirements selectively according to the configuration and operation concept of a specific aircraft. In this paper, the software requirements applicable to unmanned aircraft will be analyzed and the FDR software design will be proposed. Also, a software verification method for each requirement will be presented to verify that the implemented software is designed to satisfy all requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.569-576
• /
• 2013

The Airworthiness Certification from the government has an increasingly important role due to the dramatic growth of military aircraft development industry. It is a mandatory process of qualifying the flight safety within the aircraft's operational boundaries throughout its life cycle. The introduction of airworthiness certification has resulted in development paradigm shift from one requirement for one consumer need to the common requirement for many needs. This research paper provide the refinement of airworthiness certification criteria related to the flight control law and the verification methods which comply with its criteria.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.243-250
• /
• 2012

In this paper, a systematic consequence of evaluation method, procedure, and flight data analysis is investigated for application of ADS-33E-PRF to UAV. And it is applied to unmanned rotorcraft for evaluation. CNUHELI-020, which is developed in Chungnam National University, is used for assessment of handling quality: decoupled longitudinal and lateral/directional model were used to assess handling qualities. Evaluation flight maneuvers are categorized as hover/low-speed requirements, small-amplitude attitude change, and moderate-amplitude attitude change requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.724-733
• /
• 2017

Accidents caused by upset condition leads to fatal damage to both manned and unmanned aircraft. This paper deals with real-time detection of these aircraft upset situations to prevent further severe situations. Firstly, the difference between sensor measurement and predicted measurement from Extended Kalman filter is monitored to determine whether a target aircraft goes into an upset condition or not. In addition, repeating the time update stage of the Extended Kalman filter for a specific length of time can enable future upset situation prediction. The results of aforementioned both the approaches will build a bridge to upset prevention for future generation of manned/unmanned aircraft.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.28-39
• /
• 2022

With the development of small multicopter PAV (Personal Air Vehicle), it is necessary to develop safety-related devices for manned rotorcraft. In this study, we assumed that an external airbag can be installed in a small multicopter PAV, and using LS-DYNA's Airbag Folding Application, we performed a free-fall collision analysis by modeling the airbag shapes consisting or Roll, Zigzag, and Sigma. There was no significant difference in the final airbag deployment time of the three models. However, when it collides with the ground during deployment, the Sigma fold type external airbag had the fastest deployment speed, applying the most impact force to the PAV, while the Roll fold type external airbag applied the smallest impact force to the PAV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.13-20
• /
• 2022

Aircraft weight is an important factor affecting performance and fuel efficiency. In the conceptual design stage of the aircraft, the process of balancing cost and weight is performed using empirical formulas such as fuel consumption cost per weight in estimating element weight. In addition, when an airline operates an aircraft, it promotes fuel efficiency improvement, fuel saving and carbon reduction through weight management activities. The relationship between changes in aircraft weight and changes in fuel consumption is called the cost of weight, and the cost of weight is used to evaluate the effect of adding or reducing weight to an aircraft on fuel consumption. In this study, the problems of the existing cost of weight calculation method are identified, and a new cost of weight calculation method is introduced to solve the problem. Using Breguet's Range Formula and actual flight data of the A350-900 aircraft, two weight costs are calculated based on take-off weight and landing weight. In conclusion, it was suggested that it is reasonable to use the cost of weight based on the take-off weight and the landing weight for other purposes. In particular, the cost of weight based on the landing weight can be used as an empirical formula for estimating element weight and optimizing cost and weight in the conceptual design stage of similar aircraft.