• KSBB Journal
• /
• v.22 no.4
• /
• pp.201-206
• /
• 2007

The demand of L-arabinose has been increased recently because of its advantages including clinical effect. L-arabinose can be produced from dilute acid hydrolysis of agricultural wastes. In this study, optimum conditions of L-arabinose production using dilute acid hydrolysis of agricultural wastes and nutshells were determined. Among the tested various agricultural wastes and nutshells, corn fiber was selected as the best raw material for the production of arabinose. The highest arabinose production was achieved an acid hydrolysis of corn fiber for 1 h at 130$^{\circ}C$ with 0.4% sulfuric acid. Above optimal conditions, it was obtained 20.1 g/L glucose, 10.1 g/L xylose, 7.8 g/L arabinose and 1.8 g/L galactose from 90 g/L of corn fiber. For the purification of arabinose, it was carried out to remove all of sugars except arabinose by the Candida tropicalis cultivation of acid hydrolyzate and an organic contaminants such as pigments by the active carbon treatment of fermentation broth. Moreover, experiments were carried out to eliminate an ions by exchange chromatography. Finally, we obtained 3.1 g of partially purified L-arabinose powder with about 40% yield by evaporation and vacuum drying.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.776-788
• /
• 2012

Octa[8-{4-(4'-cyanophenylazo)phenoxy}]octyl and octa[8-{4-(4'-cyanophenylazo)phenoxycarbonyl}]heptanoated disaccharide derivatives were synthesized by reacting cellobiose, maltose, and lactose with 1-{4-(4'-cyanophenylazo) phenoxy}octylbromide or 1-{4-(4'-cyanophenylazo)phenoxycarbonyl}]heptanoyl chloride, and their thermotropic liquid crystalline and photochemical phase transition behavior were investigated. All the {(cyanophenylazo)phenoxy} octyl disaccharide ethers (CADETs) formed monotropic nematic (N) phases, whereas all the {(cyanophenylazo) phenoxycarbonyl}heptanoated disaccharide esters (CADESs) exhibited enantiotropic N phases. Compared with CADETs, CADESs showed higher isotropic (I)-to-N phase transition temperatures. Photoirradiation of the disaccharide derivatives in a glass cell or in a cell with a rubbed polyimide (PI) alignment layer at a N phase resulted in disappearance of the N phase due to trans-cis photoisomerization of azobenzene, and the initial N phase was recovered when the irradiated sample was kept in the dark because of cis-trans thermal isomerization and reorientation of trans-azobenzenes. The rates of the photochemical N-I and the thermal I-N phase transition of disaccharide derivatives in a cell with a rubbed PI alignment layer were faster than those in a glass cell, and were significantly different from those observed for the monomesogenic compounds containing cyanoazobenzene and the 4-{4'-(cyanophenylazo)phenoxy}octyl glucose and cellulose ethers. The results were discussed in terms of difference in cooperative motion of azobenzene groups due to the flexibility of the main chain, the number of mesogenic units per repeating units, and the distance between the azobenzene groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.199-204
• /
• 2006

This study was conducted to investigate the quality characteristics of noodles prepared with the addition of nanofiltered (NF) powder of sunmul. Noodles were prepared with different levels $(0\%,\;1.5\%,\;3\%\;and\;5\%,\;w/w)$ of NF powder and physico-chemical properties were examined. Results of rapid visco analyzer showed that peak, trough, final viscosity and set back decreased as the NF powder level increased. The weight and volume of cooked noodles increased with the addition of NF powder. Turbidity of soup also increased as the amount of NF powder increased, indicating higher cooking loss. The color of wet and cooked noodles became greenish yellow as the NF powder level increased. Hardness, springiness, gumminess and brittleness of cooked noodles decreased with the increasing amount of NF powder. Results of sensory evaluation showed that noodles prepared with up to $3\%$ addition of NF powder was considered to be as acceptable as noodles prepared without NF powder.

• Korean Journal of Ichthyology
• /
• v.26 no.1
• /
• pp.25-33
• /
• 2014

This study was conducted to observe the spawning behavior and early life histroy of elegant blenny, Omobranchus elegans reared in the laboratory. The elegant blenny were caught at Dolsan lsland, Yeosu-si, Jeollanamdo from June in 2012. As a result of observeation, male fish attracted female continuously and guide lead to spawning site and clean the surface of inner pant in oyster shell or barnacle shell. Female left after spawning and male protected their eggs until they had hatched out. The fertilized eggs were spherical in shape (mean diameter: 1.06 mm; mean oil globule diameter: 0.24 mm) and transparent. Larvae hatched at 203 hrs 40 mins after fertilization at $25.5{\sim}28.5^{\circ}C$ (mean $27.0^{\circ}C$). The newly hatched larvae were 3.04~3.09mm(mean 3.06 mm, n=10) in total length and their mouth and anus were already opened. They began to eat rotifer and transformed to postarvae stage. 10 days after hatching postlarvae was measured 6.39~6.45mm(mean 6.42 mm, n=10) in total length. 60 days after hatching juvenile was measured 21.5~22.2 mm (mean 21.8 mm, n=10) in total length with dosal fin rays XI-22; ventral fin rays I-2; anal fin rays II-23; caudal fin rays 21; pectoral fin rays 13.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Journal of Ginseng Research
• /
• v.23 no.3 s.55
• /
• pp.123-129
• /
• 1999

Under the light condition of 25,000 Lux (12 hrs dark and light cycle) with scrapping treatment of aerial mycelia of Cylindrocarpon destructans on potato dextrose agar (PDA), V-8 juice agar, and ginseng extract agar, production of the macroconidia was increased to $3.7\~8.1$ fold over them produced in the dark. They were also produced $7.7\~18.0$ times more in the liquid cultures under the light condition than under the dark as well. PDA and V-8 juice agar among the tested were the best for the macroconidium production. On PDA, 1,585 $macroconidia/mm^2$ were produced under the light of 25,000 Lux with scrapping treatment of aerial mycelia of C. destructans, which is 3.2 and 1.4 times more than those produced under 3,000 and 10,000 Lux, respectively. Meanwhile, $20\~99$ macroconidia/$mm^2$ were produced by the non-scrapping under the light condition between 3,000 Lux and 25,000 Lux. The macroconidia were, however, lysed at $6\~7$ days after being incubated under the above range of the light. They were consisted of $1\~3$ cells in a macroconidium while $69.4\~100\%$ of them were the two-celled and the number did not seem to be affected by either the scrapping or the light. Production of chlamydospore converted from mycelia of C. destructans seemed to be promoted by the light and the scrapping as well. The 1,285 chlamydospres/$mm^2$ were produced with the light (25,000 Lux), which is 2.8 and 1.2 times more than those with 3,000 and 10,000 Lux, respectively. Scrapping the aerial mycelia of the cultures increased the chlamydospore formation to 1.9, 2.5 and 1.4 times more than the non-scrapping under the light intensity of 3,000 Lux, 10,000 Lux, and 25,000 Lux, respectively. On PDA, 1 to 8 chlamydospore(s) per catena were formed by all treatments tested and $34.2\~58.9\%$ of them was a single chlamydospore, However, the numbers was affected by neither the light ($3,000\~25,000$ Lux) nor the scrapping the aerial mycelia.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.147-157
• /
• 2023

Centella asiatica extract is widely used as a raw material for cosmetics due to its various effects, but it is difficult to expect penetration into the skin due to its high molecular weight and low solubility. In order to solve these problems, lipid-based liposomes of various types were developed to increase skin absorption. Therefore, in this study, we tried to increase the skin absorption rate by preparing transfersomes using surfactants as edge activators in existing liposomes. Liposome and transfersomes containing Span 80 and Tween 20, 60, 80, and 85, respectively, were prepared using a high-pressure homogenizer, and we evaluated the particle size, polydispersity index, zeta potential, and skin absorption rate. As a result, there was almost no change in the physical properties of particle size, polydispersity index and zeta potential from 25 ℃ to 60 d, and the particle size of transfersomes containing Tween 20, 60, and 80 increased after 60 d at 45 ℃. Madecassoside, main substances of the Centella asiatica extract was used as an standard and madecassoside was measured and calculated when measuring the skin absorption rate using Franz diffusion cells. As a result, formulations containing Tween 20 were the most, whereas formulations containing Span 80 were the least. According to the skin absorption coefficient (Kp) value, all formulations showed 'very fast', and the absorption rate was similar or greater than that of liposomes, except for formulations containing Span 80. Through this, it was confirmed that the larger the HLB value of the nonionic surfactant, the smaller the particle size of the transfersome, and the increased skin absorption rate due to the increased flexibility of the vesicle membrane. Through this study, transfersome using surfactant as an edge activator can be expected to solve local skin problems not only as a cosmetic raw material or product, but also by increasing skin absorption.