• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.453-466
• /
• 2020

As the demand for eco-friendly energy increases to overcome the energy shortage and environmental pollution crisis, hydrogen economy has been proposed as a potential solution. Accordingly, an economical and efficient hydrogen production is considered to be an essential industrial process. Research on applying hydrogen separation membranes for H₂/CO₂ separation to the production of highly concentrated hydrogen by purifying H₂ and capturing CO₂ simultaneously from synthetic gas produced by gasification is in progress nowadays. In high temperature environments, the membrane separation process using glassy polymeric membrane with H₂ selectivity has the potential for CO₂ capture performance, and is an energy and cost effective system since polybenzimicazole (PBI)-based separators show excellent chemical and mechanical stability under high-temperature operation conditions. Thus, the development of high-performance PBI hydrogen separators has been rapidly progressing in recent years. This overview focuses on the recent developments of PBI-based membranes including structure modified, cross-linked, blended and carbonized membranes for applications to the industrial hydrogen separation process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.141-147
• /
• 2010

Liquefied natural gas(LNG) is natural gas that has been converted temporarily to liquid form for ease of storage and transport it. Natural gas is the worlds cleanest burning fossil fuel and it has emerged as the environmentally preferred fuel of choice. In Korea, the demand of this has been increased since the first import from the Indonesia in 1986. LNG takes up about 1/600th the volume of natural gas in the gaseous state by cooling it to approximately $-162^{\circ}C(-260^{\circ}F)$. The reduction in volume therefore makes it much more cost efficient to transport and store it. Modern LNG storage tanks are typically the full containment type, which is a double-wall construction with reinforced concrete outer wall and a high-nickel steel inner tank, with extremely efficient insulation between the walls. The insulation will be installed to LNG outer tank for the isolation of cryogenic temperature. The insulation will be installed in the base slab, wall and at the roof. According to the insulation's arrangement, the different aspects of temperature transmission is shown around the outer tank. As the result of the thermal & stress analysis, by the installing cellular glass underneath the perlite concrete, the temperature difference is greatly reduced between the ambient temperature and inside of concrete wall, also reducing section force according to temperature load.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.45-51
• /
• 2008

A single layer-latticed dome is advantageous for large span structures because it is very stiff despite the light weight of the structure itself. However, this structure becomes easily unstable during erection due to its large size. The Block method is popular with the large span structures. A partial block of the dome is fabricated on the ground and lifted by crane to a designated location of structures. The lifting point selection is very important to create a stable erection and to avoid buckling of members during the erection. The purpose of this study is to analyze the structural behaviors and buckling characteristics according to the lifting point of single-layer latticed domes with triangle network in order to take materials about the safe and economic erection. The conclusions are obtained as follow. 1) The buckling strength of the block part varies with the location of lifting points when it is erected. In case, the height of the dome is lower, the effort of buckling strength of the structure is higher. 2) In buckling strength, the effect of the lifting rope length is smaller than it of the lifting points change.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.211-217
• /
• 1984

To study affinity of proteolytic enzymes to soy proteins, the physicochemical and functional properties of enzymatically modified protein products, kinetic parameters and degree of hydrolysis were measured using trypsin, alcalase (serine type protease) and pronase. Bacterial alcalase and pronase showed much greater affinity to soy protein than animal intestinal trypsin. This effect was very significant when unheated soy isolate was used as a substrate. Specific activities of these enzymes decreased with the increment of substrate concentration (over 2.0%, w/v) when heat denatured soy protein was used as a substrate. However, the decrease in specific activity was negligible at substrate concentrations lower than 2.0%. Polyacrylamide gel electrophoretic results showed that the pattern of 2S protein band changed distinctly in alcalase hydrolysis as compared with those of trypsin and pronase. Protein solubilities of alcalase and pronase hydrolyzates increased by 25-30%, at their pI (pH 5.0) over the control. Virtually no change was observed in solubility by trypsin hydrolysis. Heat coagulability and calcium-tolerance of the protein increased by enzymatic hydrolysis. No clear tendency, however, was observed for emulsion properties, foam expansion and the amount of free -SH groups. The enzyme treatment considerably decreased foam stability.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.228-234
• /
• 1984

A partial hydrolysis of soybean protein isolate was carried out by using pepsin and trypsin. The degree of hydrolysis was evaluated by chemical analysis, viscometric measurements and gel electrophoresis. The functional properties of the hydrolyzates such as flow behavior, emulsion properties and foaming properties were evaluated. A selective hydrolysis of 11S protein fraction by pepsin was observed from the SDS-PAG electrophoresis. The changes in the molecular weight distribution by different conditions of enzyme hydrolysis were evaluated. The changes in the intrinsic viscosity of the protein hydrolylate by reaction time were highly correlated to the contents of TCA soluble protein and 0.03 M $CaCl_2$ soluble nitrogen. The degree of hydrolysis ($DH_{TCA}$, $DH_{Ca}$) were used to evaluate the effect of enzyme treatment on the functional properties of the hydrolyzate. The apparent viscosity and emulsion capacity and stability of the protein solution decreased as DH increased, while the foaming capacity increased linearly with the increasing DH.

• The Journal of the Korean bone and joint tumor society
• /
• v.12 no.2
• /
• pp.126-130
• /
• 2006

Liposclerosing myxofibrous tumor (LSMFT) is a fibro-osseous lesion of the bone with a marked predilection for the intertrochanteric region of the proximal femur. It is characterized by a complex mixture of histological elements including fibrous dysplasia-like features, myxofibrous tissue, lipomatous area, ischemic ossification, xanthoma cells and pseudo-Paget's bone. Though some consider LSMFT as a variant of the fibrous dysplasia, intraosseous lipoma, or other benign osseous lesions, recently LSMFT is emerged as a genuine clinicopathologic entity. We experienced a 48-year female patient with typical histologic and radiologic findings of LSMFT. It was located at the intertrochanteric area of the femur. Radiologically, the lesion was radiolucent and ground-glass appearance with sclerotic rim in the plain film and magnetic resonance imaging. Histologically, myxofibrous tissue, lipomatous area and fibrous dysplasia-like features were predominant findings.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.517-527
• /
• 2010

The purpose of this study was to investigate the causal relationship among perceived value, satisfaction and revisit intention for visitors of the Korea National Arboretum. Three hundred respondents were selected by quota sampling, and well-known measurement scales utilized in marketing field were adopted in order to measure three variables with some modification to apply for arboretum visitors. Results of structural equation model showed that perceived value affected visitors' satisfaction, which in turn influenced revisit intention. Specifically, "emotional value" had the most significant influence on satisfaction, followed by "value for money" and "novelty value"; however, "social value" was not an influential construct. Based on calibration results, several strategies were suggested for the effective management. Authors advised that (a)improvement of measurement scale of value, (b)inclusion of self-congruity as antecedent variable to satisfaction, (c)changing revisit intention to word-of-mouth communication as a post-purchase behavioral intention, and (d)implementation of market segmentation should be considered for future research.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.85-92
• /
• 2017

purpose: Image Guide System offers therapy precise, especially Intensity Modulated Radiation Therapy. However, organs at pelvis have variation and uncertainties each therapy. it brings IG system for verifying patient's position. In this study, analysis the variation at pelvis during rectal cancer radiation therapy. Moreover design the patient re-setup technique and apply to patients. Material and Method: 40 rectal cancer patient who have radiation therapy. The 530 image which acquired from IG system are analyzed. The bone structure, bladder, gas in the rectum, small bowel, soft tissue, weigh loss are evaluated by the criterion. The criterion are classified by best, good, bad and figure out the ratio with count. The re-setup proceed in case of one or over the two get the bad criterion and figure out the ratio of re-setup results: The ideal of therapy ratio is 19.2 % each criterion. And the good for therapy ratio is 54.9 %, the cases of bad for therapy is 25.8 %. The bad cases are have therapy after re-setup with post process. conclusion: Each pre-treatment image that acquired IG system has different results despite of same patients. The 25.8 % need to re-setup in order to unsuitable therapy. It is implies that the IG system is necessary establishing precise treatment plan like IMRT especially rectal cancer.