• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.63-67
• /
• 2008

A new peanut cultivar "Jopyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2006. It was developed from the cross between the very short stem cultivar "CUP brittle" and the high-yielding cultivar "Daekwang". "Jopyeong" which is Virginia plant type has 23 branch number per plant with early maturing and ellipse-shaped large kernel. Each pod has two grains with brown testa and 100 seed weight was 87g in the regional yield trials (RYT). This variety also showed more resistant to late leaf spots compared with check one. Especially it has resistance to lodging owing to short stem and erect plant type. In the regional yield trials "Jopyeong" was out-yielded than check variety by 11% with 8.37 ton/ha for fresh pod and by 4% with 3.95 ton/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.178-183
• /
• 2008

A new peanut variety "Seonan" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was developed from the cross between the erect short stem cultivar "SP9128" and the high-yielding cultivar "Daekwang". "Seanan" which is Virginia plant type has 18 branch number per plant with early maturing and long-ellipse shaped large kernel. Each pod has two grains with brown testa and 100 seed weight was 87 g in the regional yield trials (RYT). Especially this variety has resistance to lodging owing to short stem. The free sugar and tannin content of fresh peanut are 3.7% and 0.48%, respectively, similar to check variety. In the regional yield trials "Seonan" was outyielded than check variety by 14% with 8.59 MT/ha for fresh pod and by 7% with 3.75 MT/ha for grain.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.168-172
• /
• 2008

A new peanut variety "Charmpyeong" (Arachis hypogaea ssp. hypogaea L.) was developed at the Yeongnam Agricultural Research Institute, NICS, in Milyang in 2007. It was developed from the cross between the high-yielding cultivar "Shindaekwang" and the very short stem cultivar "ICGV94216". This Virginia plant typed "Charmpyeong" has 33 cm stem height and 18 branch number Each pod with ellipse-shaped large kernel has two grains with brown testa and 100 seed weight was 88 g in the regional yield trials (RYT). This variety also showed more resistant to web blotch compared with check one. Especially it has resistance to lodging until harvesting owing to short stem. In the regional yield trials "Charmpyeong" was outyielded than check variety by 13% with 4.35 MT/ha for grain.

• Research in Plant Disease
• /
• v.26 no.4
• /
• pp.229-238
• /
• 2020

Field validation of PBcast, an infection risk model for Phytophthora blight of pepper, was conducted through a designed field experiment in 2012 and 2013. Conduciveness of weather conditions at 26 locations in Korea in 2014-2017 was also evaluated using PBcast. The PBcast estimated daily infection risk (IR) of Phytophthora capsici based on weather and soil texture data. In the designed filed experiment, four treatments including routine sprays at 7-day intervals (RTN7), forecast-based sprays when IR reached 200 (IR200) and 224 (IR224), and no spray (CTRL) were compared in terms of disease incidence and number of sprays recommended for disease control. In 2012, IR had reached over 200 twice, but never reached 224. In 2013, IR had reached over 200 three times and once higher than 224. The RTN7 plots were sprayed 17 and 18 times in 2012 and 2013, respectively. Weather conditions throughout the country were generally conducive for Phytophthora blight and 3-4 times of fungicide sprays would have been reduced if the PBcast forecast information was adopted in the decision-making for fungicide sprays. In conclusion, the PBcast forecast would be useful to reduce fungicide applications without losing the disease control efficacy to protect pepper crop from Phytophthora blight.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2009

Purpose: To evaluate the relationship between the real pathology & abnormal finding found by ultrasonography. Without an MRI test being done beforehand, an arthroscopy is done after an ultrasonography to show abnormal lesions during a knee abnormality. Materials and Methods: The subjects were 42 patients out of 49 cases, excluding those with rheumatoid arthritis, septic arthritis and patients suspected with a ligament tear, which were examined by ultrasonography alone before receiving a knee arthroscopy in our hospital from July 2007 to July 2008. In every case, a physical examination, simple X-ray and knee ultrasonography was done. An arthroscopy was performed when there was ultrasonographic abnormal finding. Before the procedure, a MRI test was not performed and when abnormal findings were found by an arthroscopy, an appropriate surgery was done. Results: During the ultrasonographic examination, there were various sized effusions in the suprapatellar pouch. Also, in addition there were eleven cases of medial meniscus abnormalities, sixteen cases of lateral meniscus abnormalities, and two cases of cystic lesions. Throughout the arthroscopic examination, there were 14 cases of medial meniscus abnormalities, 20 cases of lateral meniscus abnormalities, 15 cases of cartilage damages, 9 cases of medial pathologic plica, 2 cases of intra-articular loose bodies, 5 cases of chondromalacia, 2 cases of cyst, and 2 cases of synovitis. When an effusion abnormality was found by the ultrasonography in a suprapatellar pouch, there was a 100% probability of knee pathology. When a medial meniscus abnormality was found with an ultrasonography, there was a 90.9% probability of a real pathology. When a lateral meniscus abnormality was found there was 81.2% probability of a real pathology. Ultrasonography was 100% accurate when it came to cystic lesions. Conclusion: Knee ultrasonography performed before an arthroscopy seems to be a very useful examination method when suspecting intra-articular lesions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.43-58
• /
• 2008

This research was conducted to determine the alternative tool of chemical spray for rice cultivation using the unmanned helicopter(Yamaha, R-Max Type 2G-remote controlled system) at farmer's field in Korea. The unmanned helicopter tested was introduced form Japan. In Korea the application of chemicals by machine sprayer for pest management in rice cultivation has been ordinarily used at the farmer's level. However, it involved a relatively high cost and laborious for the small scale of cultivation per farm household. Farm population has been highly decreased to 7.5% in 2002 and the population is expected to rapidly reduce by 3.5% in 2012. In Japan, pest control depending on unmanned helicopter has been increased by leaps and bounds. This was due in part to the materialization of the low-cost production technology under agricultural policy and demand environmentally friendly farm products. The practicability of the unmanned helicopter in terms of super efficiency and effectiveness has been proven, and the farmers have understood that the unmanned helicopter is indispensable in the future farming system that they visualized. Also, the unmanned helicopter has been applied to rice, wheat, soybean, vegetables, fruit trees, pine trees for spraying chemicals and/or fertilizers in Japan Effect of disease control by unmanned helicopter was partially approved against rice blast and sheath blight. However, the result was not satisfactory due to the weather conditions and cultural practices. The spray density was also determined in this experiment at 0, 15, 30, and 60cm height from the paddy soil surface and there was 968 spots at 0cm, 1,560 spots at 15cm, 1,923 spots at 30cm, and 2,999 spots at 60cm height. However, no significant difference was found among the treatments. At the same time, there was no phytotoxicity observed under the chemical stray using this unmanned helicopter, nor the rice plant itself was damaged by the wind during the operation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.31-36
• /
• 2000

180g of fermented soy paste and 150g of red pepper paste were packaged in glass jars of 232 mL with different conditions of active packaging and then stored at $13^{\circ}C$ for about 170 and 128 days, respectively. During the storage, package atmosphere, surface color, pH, acidity and microbial flora were monitored to see the effect of packaging conditions. Test packaging conditions include package equipped with $Ca(OH)_2\;as\;CO_2$ absorber, package with pinhole and closed control one. Closed control packages of soypaste and red pepper paste showed the increased $CO_2$ partial pressure, the decreased $O_2$ partial pressure and the constant $N_2$ partial pressure to produce high pressure buildup with storage. The paste packages with $Ca(OH)_2$ maintained relatively low $CO_2$ partial pressure and thus the package pressure close to normal atmospheric pressure for initial storage period of 70 days. The packages with air pinhole channel had the partial pressures of $O_2\;and\;N_2$ decreased with storage time, while $CO_2$ partial pressure first increased to a maximum and then slowly decreased thereafter Without any pressure increase the packages with pinhole gave the lowest quality changes possibly due to the effect of package atmosphere, but it had problem of mold contamination and growth for soy paste after 120 days. There were no difference in microbial flora between the packages after about 70 day storage.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.167-174
• /
• 2010

Purpose: Anatomical repair of massive rotator cuff tear has been technically challenging because of medial retraction, muscle atrophy and fatty degeneration. Among several treatment options for massive rotator cuff tear, we reviewed rotator cuff repairs and investigated modalities for improvement of clinical outcomes, decreasing the re-tear rate, and increasing healing. Materials and Methods: Patient-related factors and rotator cuff-related factors were the two major groups of factors we considered when choosing a treatment plan. Results: Mobilization of a massive rotator cuff tear was increased by soft tissue release and by the interval slide technique. After meticulous soft tissue release, anatomical repair could be achieved. If the injury was not amenable to anatomical repair, alternative treatment options such as partial repair, the margin convergence technique and augmentation with a tenotomized biceps tendon were considered. Many reports of massive rotator cuff repair demonstrated satisfactory clinical outcomes, decreased pain, recovery of shoulder functions, and increases in muscle strength. However, the re-tear rate had been reported to be relatively high in long-term follow-up. Conclusion: Despite a high re-tear rate after massive rotator cuff repair, a better understanding of the pathogenesis, progression and clinical symptoms of massive rotator cuff tear and improved surgical materials and techniques will lead to satisfactory clinical outcomes.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.63-71
• /
• 2009

Recyclable wastes coming into material recovery facilities(MRFs) is mostly packed by plastic bag or sack bag. Bag rupturing device is essential to improve capacity and efficiency of MRFs. Bag opening works of MRFs is mostly done by numerous workers and shredder-type bag rupturing device. It often makes a problems; decreased capacity, shredded recyclables, worker safety by explosion and broken glasses, etc. In the present work, bag rupturing device with octagonal rotating blade drums has been developed to solve the existing problems and environment assessment is also performed during operation of the device. Capacity of the device was about 5.6 ton/hr at 8.2 rpm of drum revolution speed and 1.25 m/min of belt conveyor speed. It satisfied initial designed capacity(5.0 ton/hr) and max. capacity 8.8 ton/hr was achieved at 12.5 rpm of drum revolution speed and 1.50m/min of belt conveyor speed. Bag rupturing efficiencies on outer and inner bag were obtained at 100% and about 95.6% as average, respectively and original form of glass bottles in the bag was maintained without broken by about 96.5%. This result shows that the safety in hand sorting by the workers could be improved. As result of environmental assessment on the noise, vibration and particulates, the measured levels on noise, vibration and particulates show the below standard regulatory limits. It could be concluded that the problems of existing devices in MRFs could be solved by adopting the bag rupturing device with octagonal rotating blade drums in on-site operation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.202-210
• /
• 2014

Purpose: The aim of this study was to evaluate the stress concentration and distribution whether restoring the cavity or not while restoring with metal ceramic crown on tooth with abfraction lesion using finite element analysis. Materials and methods: Maxillary first premolar was selected and made a total of 10 finite element model. Model 1 was natural tooth; Model 2 was tooth with metal ceramic crown restoration which margin was positioned above 2 mm from CEJ; Model 3 was tooth with metal ceramic crown restoration which margin was positioned on CEJ; Model 4 was natural tooth which has abfraction lesion; Model 5 and 6 had abfraction lesion and the other condition was same as model 2 and 3, respectively; Model 7 was natural tooth which had abfraction lesion restored with composite resin; Model 8 and 9 was tooth with metal ceramic crown after restoring on abfraction lesion with composite resin; Model 10 was restored tooth on abfraction lesion with composite resin and metal ceramic crown restoration which margin is positioned on lower border of abfraction lesion. Load A and Load B was also designed. Von Mises value was evaluated on each point. Results: Under load A or load B, on tooth with abfraction lesion, stress was concentrated on the apex of lesion. Under load A or load B, on tooth that abfraction lesion was restored with composite resin, the stress value was reduced on the apex. Conclusion: In case of abfraction lesion was restored with composite resin, the stress was concentrated on the apical border of restored cavity regardless of marginal position. It was favorable to place crown margin on the enamel for restoring with metal ceramic crown.