• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.33-45
• /
• 2007

Using switches and sensors informing the current on or off state, this paper suggests a sleeping control and remote monitoring system that not only can recognize the sleeping situations but also can control for keeping an appropriate sleeping situation remotely, And we show an example that this system is applied to the healthcare sleeping mat, Our system comprises the following 3 parts: a part for detecting the sleeping situations, a part for extracting sensing data and sending/receiving the relating situated data, and a part controlling and monitoring the all of sleeping situations. In details, in order to develop our system, we used the touch and pressure-sensitive sensors with On/Off functions for a purpose of the first part, The second part consists of the self-developed embedded board with the socket based communication as well as extracting real-time sensing data. And the third part is implemented by service modules for providing controlling and monitoring functions previously described. Finally, these service modules are implemented by the TMO scheme, one of real-time object-oriented programming models and the communications among them is supported using the TMOSM of distributed real-time middleware.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.483-490
• /
• 2005

Mass resolution of the time of flight aerosol mass spectrometer for an aerosol component analysis depends on the initial direction and the initial energy of the ions. We have found that the shape of the optimum post focusing electric field is not linear. The maximum electric potential should be applied to the ions whose initial direction is 90 degree. To check on the post focusing effects, we have installed a laser ablation mass spectrometer. By using this LA-MS, we have found that the average energy distribution of the laser ablated ions is 8 eV. To establish the optimum mass resolution, a time delay and a high voltage are needed, and the results of the study show that 1500 nsec, and 3.7 kV are the optimum parameters for our system respectively. The isotope mass signals of copper show a good resolution.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1012-1016
• /
• 2008

[ $TiO_2-V_2O_5$ ] sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. As a results of crystalline properties, $V_2O_5$ peaks were not found in spite of $V_2O_5$ additive. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping. Capacitance of thin films increased with increasing heat treatment temperature and it increased largest at $700^{\circ}C$. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1162-1164
• /
• 1995

In this paper, $TiO_2$-xmol%$V_2O_5$, x=0.0, 1.0, 2.0, 3.0 specimens are fabricated by Sol-Gel method. For the improvement of humidity sensitive characteristics for specimens, their microstructures are analysed and the optimum processing condition is established. Grain size increases with substitution rate of $V^{5+}$, on $Ti^{4+}$ site. Their humidity sensitive characteristics is good at 1mol% of $V_2O_5$ rate and heat-treated at $700^{\circ}C$. The capacitance of specimens decreases with frequency.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.196-199
• /
• 2016

As the children with Autistic Spectrum Disorders(ASD) are increasing, and study of intelligent robot is dynamically proceeding, therapeutic robots are needed to help ASD children who have a lack of social interaction, inadequacy of communication. This paper deals with the design and operation of a cat robot for the treatment. To configure the behavior based on the results of field experiments, emotional treatment is suggested and robot structure considering ASD characteristic is designed with some sensors. In addition, we verified the effectiveness of the operation by field test.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.107-117
• /
• 1998

In this paper, a deadbeat controller design technique is developed for the recently introduced PFC(Power Factor Correction) circuit named as a QBSRR(Quantum Boost Series Resonant Rectifier) to achieve the fast dynamic responses of the output voltage in the presense of any load variations. And, in order to monitor the load information without employing the current sensor, the load estimation method is also derived. By using the information of the load estimation method, the proposed controller gain is automatically adjusted to have the system always keep the very fast dynamic responses. To verify these superior performances, the simulation and the experiment are carried out.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.83-83
• /
• 2018

최근 의료, 보건, 헬스케어 분야에 대한 관심이 증가함에 따라 질병의 조기 진단 연구가 각광 받고 있다. 특히 표면증강 라만 산란 (Surface Enhancement Raman scattering)은 고분자 검출을 위해 가장 유용한 물리 화학적 기법으로 SERS를 활용한 특정물질 검출 기술 개발에 대한 연구가 많이 이루어지고 있다. 나노구조의 국부적 표면 플라즈몬의 공명조건 (Surface Plasmon Resonance, SPR)으로 유도된 전자기장은 우수한 SERS 신호를 나타낸다. 따라서 표면 플라즈몬 공명 효과는 귀금속 나노입자의 종류, 크기 및 형태, 기판의 형상 및 구조 등에 의해서 달라지게 되므로 이들을 조절하여 보다 민감한 SERS 신호를 얻을 수 있다. 본 연구에서는 고감도 SERS-Active 기판을 제작하기 위해 SERS 기판 표면의 나노구조를 최적화 하였다. SERS 기판 표면을 제어하기 위해 공정파워, 공정압력, 기판의 온도 등의 증착공정 변수에 변화를 주어 표면의 나노구조를 형성하였다. 이를 분석하기 위해 SEM 분석을 통해 피라미드형 실리콘 기판 표면의 Au 나노구조 금속 박막을 확인하였고, XRD를 이용하여 결정성 및 결정크기를 확인하였다. Rhodamine 6G를 이용한 라만 분석을 통해 SERS 신호의 강도를 알 수 있었다. 금속 나노구조의 형태, 온도 제어를 통해 SERS 신호강도가 우수한 나노구조 기판을 제조 할 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.36-45
• /
• 2017

Abstract It is necessary to verify the properties of an inertial measurement unit in the flight environment before applying to military applications. In this paper, we presented a new approach to verify an inertial measurement unit(IMU) in regard to the performance and the robustness in flight environments for the high-dynamics vehicle systems. We proposed two methods for verification of an IMU. We confirmed normal operation of an IMU and properties in flight environment by using direct comparison method. And we proposed real time multi-navigation system to complement the first method. The proposed method made it possible to compare navigation result at the same time. Therefore, it is easy to analyze the performance of an inertial navigation system and robustness during the vehicle flight. To verify the proposed method, we carried out a flight test as well as an experimental test of flight vibration on the ground. As a result of the experiment, we confirmed flight environment properties of an IMU. Therefore, we shows that the proposed method can serve the reliability improvement of IMU.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7176-7181
• /
• 2015

This thesis is about the system where the solar module is attached to the high functional guardrail posts with anti-weed, anti-plant, and road-kill applied to produce internal power, enabling the integrated control and real-time monitoring of appearance of wildlife and road conditions using the USN. The whole system consists of a photovoltaic module(PV), a detection sensor(pyroelectric), a controller(operation select and motion sensor), the USN system, the DB(sound and flash), an output unit of sound and flash, and the control system of road-kill prevention and safety induction for vehicles. Thus this study aims to address the remote control and monitoring system of multipurpose guardrails to improve road environment, prevent road-kills, protect wild animals, and guide cars safely by using the USN which is combined with new renewable energy and IT convergence technology. As a result of the study on the remote control and monitoring system using the USN, it was ascertained that the response time of the unmanned sensing system was within 5.1 ms with the current consumption of 0.328 mA, and the data transmission speed of the remote control system was 250 kbps with the current consumption of 0.283 mA.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.1-12
• /
• 2021

Here, we introduce a laser-induced graphene synthesis technology and its applications for the electric/electronic device manufacturing process. Recently, the micro/nanopatterning technique of graphene has received great attention for the utilization of these new graphene structures, which shows progress developments at present with a variety of uses in electronic devices. Some examples of practical applications suggested a great potential for the tunable graphene synthetic manners through the control of the laser set-up, such as a selection of the wavelength, power adjustment, and optical techniques. This emerging technology has expandability to electric/electronic devices combined together with existed micro-packaging technology and can be integrated with the new processing steps to be applied for the operation in the fields of biosensors, supercapacitors, electrochemical sensors, etc. We believe that the laser-induced graphene technology introduced in this paper can be easily applied to portable small electronic devices and wearable electronics in the near future.