• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1077-1079
• /
• 2005

최근 산업기기의 대형화로 인하여 전기기기 및 전력기기의 고효율 대용량 설계에 대한 관심이 커지고 있다. 그 동안에는 대용량 전동기로 주로 유도전동기와 릴럭턴스 전동기가 사용되어 왔다. 그러나 유도전동기는 저속에서의 효율이 낮으며 회전자의 열손실이 효율과 역률을 저하시키는 단점이 있고, 릴럭턴스 전동기는 구조 및 동작원리 상 큰 맥동토크로 인하여 소음과 진동이 매우 크다. 이에 효율과 역률이 좋고 고속운전이 가능한 영구자석형 전동기에 대한 연구가 많이 진행되었고 최근에는 영구자석 재질(희토류계)의 발달함로 인하여 고속 대용량 자석계자형 BLDC와 영구자석형 동기전동기의 설계가 가능해져 대형기에 많이 이용되고 있다. 그러나 대용량 전기기기의 경우 그 크기와 부피가 매우 크고 대전류 대전압의 전원을 공급하여야 하기 때문에 인버터부를 병렬 연결하여야 하므로 제어부를 포함한 전동기의 설치 공간이 증가해 지는 단점이 있다. 이에 본 연구에서는 인버터를 전동기의 회전자 내부에 배치한 인버터 내부형 5[MW]급 BLDC 전동기를 설계하고자 하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.417-425
• /
• 2006

This paper presents a new speed sensorless vector control scheme of Spindle Induction Motors(SIM) which can be successfully applied to at any speed including even zero speed. The proposed sensorless vector control of SIM uses rotor flux estimator with a variable bandwidth. This approach is based on the Closed-Loop Rotor Flux Observer(CLRFO) which includes a variable bandwidth of the PI controller. For low speed operation, the bandwidth of CLRFO has a variable bandwidth structure according to the estimated rotor velocity. The experimental results show the satisfactory operation of the proposed sensorless algorithm.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.106-109
• /
• 2005

산업화와 더불어 자동화의 요구에 따라 여러 분야에서 유도전동기의 응용 사례가 늘어나고 있다. 본 연구는 인버터단의 전류센서에서 실시간 얻어진 전류신호로 부터 대표적인 전기, 기계적인 4가지 고장(Bearing Fault, Broken Rotor bar, Misalignment, Unbalance)을 검출하여 예기치 못한 고장에 대비할 수 있는 실시간 진단 알고리듬을 제시한다. 실시간 진단의 핵심요소인 동기화 방법으로서 Hilbert Transform을 응용하였다. 총 40세트의 정상 모터 데이터를 임의로 선택하여 두 데이터의 차를 이용하여 0에 근사한 정상 모터 뎀플릿 값을 설정하였다. 이를 이용하여 진단 대상 전동기의 고장 유무를 미리 판단하게 된다. 만약 기준치 이상의 오차가 나타나게 되면, 이와 비교하기 위한 미리 수집된 각4가지 고장 전동기의 미소신호 템플릿 데이터와의 유사성을 비교하여 고장의 종류를 표시하며, 고장의 종류가 진단되지 않은 대상은 고장 유무만 표시된다.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.203-207
• /
• 2015

This paper introduces a probabilistic analysis method in order to analyze the effect of manufacturing tolerance on induction motor performance occurring in massive production. The univariate dimension reduction method is adapted to predict probabilistic characteristics of a performance function due to certain probabilistic distributions of design variables. Moreover, the sensitivity information on mean and variance of the performance function is estimated, and then the effect of randomness of individual design variables on the probability performance function is analyzed. The effectiveness and accuracy of the method is investigated with a mathematical model and an induction motor.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.2
• /
• pp.56-61
• /
• 1992

This paper is reported on the simulation and test results of a constant flux vector control scheme of an induction motor without any speed detecting eqiupment, in which the adaptive current PWM inverter is used. The rotor speed is estimated form stator voltage, current and parameters of motor, and control algorithm in the system is performed with by micro processor. By comparing the waveform of input current of this system with that of the case with taco-generator, good agreement is observed except small ripple component. Experimental results which are acquired at start up and during acceleration/deceleration are quite similar to those of the simulation results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.81-87
• /
• 2005

This paper addresses the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. CAN built in DSP2812 microprocessor is used to control and monitor the multi-motor system with the inverter driving system. CAN network implementation schemes and the algorithm for multi-motor control and monitoring is also developed. We configure the multi-motor control experimental system to verify the proposed algorithm and the reliability of CAN networks system in the various operation of two induction motors. The experimental results show that CAN based networked intelligent multi-motor control system using DSP2812 microprocessor can carry out the real-time network based control in various speed range and the position control of induction motors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.111-117
• /
• 2008

Generally, speed control for Induction motor widely used in industrial field is accomplished by commercial inverter. Induction motor driven by commercial inverter causes the micro surge voltage because of high speed switching of inverter. Micro surge brings about not only the breakdown of motor but also noise in PLC control system. And they court the enormous interference in activity for production. In this paper, we suggest the suppressible countermeasure for the breakdown of motor after the consideration of productive mechanism about micro surge. Experiment is performed by inverter with LCR filler in its output terminal. As a result, we confirmed that micro surge voltage is reduced. And the suppressible countermeasure for the noise of PLC control system is suggested by theoretical consideration.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2005

This paper presents a tuning-free conditional integration anti-windup strategy for induction machine with Proportional-Integral(PI) type speed controller. The on/off condition of integral action is determined by the frequency domain analysis of machine torque command without a prior knowledge of set-point changes. There are no tuning parameters to be selected by users for anti-windup scheme. In addition, the dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time even in the change of operating conditions. This algorithm is useful in many high performance induction machine applications not to allow the oscillation and overshoot of speed/torque responses. The main idea can be extended to general applications such as chemical processes and industrial robots.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.109-115
• /
• 2005

This paper addresses the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. CAN built in DSP2812 microprocessor is used to control and monitor the multi-motor system with the inverter driving system CAN network implementation schemes and the algorithm for multi-motor control and monitoring is also developed. We configure the multi-motor control experimental system to verify the proposed algerian and the reliability of CAN networks system in the various operation of two induction motors. The experimental results show that CAN based networked intelligent multi-motor control system using DSP2812 microprocessor can carry out the real-time network based control in various speed range and the position control of induction motors.

• 전기의세계
• /
• v.31 no.10
• /
• pp.675-680
• /
• 1982

전동기제어시스템은, thyristor의 개발로 펄스폭변 조형인버터와 같은 switching기능을 내포한 전원장치의 적용으로, 정류기구가 기계적접점형식에서 전기적 무접점화되어 대체되는 추세에 있어, 속도조정방식도 바꾸어져야 하게 되었다. TRANSVEKTOR제어를 적용한 자계Orientation 방식은, 이러한 관점으로 볼 때, 근원적으로 교류전동기의 속도조정기능을 실용화하는데는 가장 효과적인 방식이라고 볼 수 있다. 더욱이 제지공장 및 직물공장등 폐회로 제어운전을 하는 공정의 전동력기구에서는, 현재 활발히 개발되고 있는 전자계산조직의 활용으로, 종래 직류전동기로서의 Leonard방식의 속도제어를 하는 것에 비하여, 속응성, 신뢰성 및 그 정도에 있어서 월등하게 우수한 기능을 가진 전동기제어시스템의 실용화가 가능하게 되었다.