• Geotechnical Engineering
• /
• v.20 no.6
• /
• pp.44-47
• /
• 2004

본 기술은 와이어로프의 중간 부위와 단부에 코일스프링을 설치하여 하중 작용시 압축으로 저항하게 하는 낙석방지 울타리의 제작ㆍ설치 기술이다. 이는 낙석 발생시 고유진동수가 작고 큰 변형률이 유도되므로 접촉시간이 길어 와이어로프에 발생하는 장력을 감소시키고 충격흡수능력을 향상시켰으며, 압축으로 저항하여 와이어로프가 먼저 파단된 후 스프링이 항복하도록 하여 안전성을 향상시킨 기술이다.(중략)

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1037-1039
• /
• 2002

가전산업과 연계하여 유도가열 기술을 응용한 대표적인 시스템으로 IH압력밥솥을 예로 들 수 있다. 유도가열 코일에서 고주파 자속의 의해 발생된 와전류가 결합된 밥솥을 가열하기 때문에 유도가열 코일에는 고주파 손실을 줄이기 위해 Litz wire가 사용된다 이에 본 논문은 특히 IH압력밥솥에 사용되는 Litz wire를 선정하는 데 있어 중요한 요소가 되는 소선경, 가닥수별 AC DC 저항 및 손실계산 그리고 Cost 예측 방법을 제안한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.256-264
• /
• 2012

The directional algebraic reconstruction technique (DART) using the trigonometric current pattern is one of the image reconstruction algorithms in electrical impedance tomography (EIT). This method needs to compute resistances between electrode pairs as using relation between the injected currents and measured voltages for the reconstruction of the inner image. The delay time is incurred in this process. Therefore this paper proposes modified directional algebraic reconstruction technique (mDART) using the adjacent current pattern instead of the trigonometric current pattern to solve the delay time for initial resistance values. The proposed method uses measured voltages instead of computed resistances in the reconstruction algorithm. Hence this method can eliminate the delay time because it does not use the resistances. In conclusion, the proposed method improves image quality and image reconstruction time by using the adjacent current pattern. To prove performance of the proposed method, we carried on computer simulation of various cases.

• Korean journal of applied entomology
• /
• v.53 no.2
• /
• pp.141-147
• /
• 2014

Pinewood nematode (PWN: Bursaphelenchus xylophilus) is known to kill pine tree species that are indigenous to countries where the pest was inadvertently imported, but some cultures from the extraction of dead pines do not damage trees. Experiments were conducted to examine the effect of pre-inoculation of these low-pathogenic pinewood nematode on resistance of pine trees against the pest species. The pre-inoculated pine saplings showed induced resistance which lasted for a year, and repeated inoculation of these low-pathogenic nematodes enhanced tree resistance. All nematode samples extracted from dying or dead pines that had been killed not more than three months before the extraction were pathogenic, and most of those extracted from pines that had been killed 2-3 years before were low-pathogenic. When inoculated in pine saplings, number of low-pathogenic nematodes settled, as studied two days after inoculation, was not different from that of pathogenic ones. However, as studied after 30 days of inoculation, rate of reproduction in low-pathogenic nematodes was far lower than that of pathogenic nematodes. The rate of reproduction of several nematode isolates growing on fungal mat media of Botrytis cinerea varied, but three of four low-pathogenic isolates showed same level of reproduction rates as pathogenic ones.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.54-61
• /
• 2011

Antisense construct of cDNA for senescencerelated ACC oxidase (CAO) cDNA isolated from carnation flowers were introduced into tobacco by Agrobacteriummediated transformation. The decreasing expression of NtACO and the reduction of ethylene production were observed in these transgenic lines. In contrast, the SAMDC transcripts and spermidine content were increased. The findings that higher content of spermidine in the ethylene suppressed transgenic plants compared with wild-type should be directly resulted in the enhancement of SAMDC activity followed by the increased accumulation of SAMDC transcript. To investigate the pathogenic response in these transgenic plants, wild-type and transgenic plants were inoculated with Phytophthora parasitica pv. nicotianae. Transgenic plants suppressing ethylene production showed the increased resistance against fungal pathogen, comparing with wild-type plant. PR-protein genes expression in CAO-AS-2 and CAOAS-4 were also higher at the normal growth condition and pathogenic response than in wild-type plants. The results of higher spermidine content and SAMDC activity in transgenic plants, CAO-AS-2 and CAO-AS-4, support the possibility that an increase in spermidine content might induce the higher transcripts of PR-protein genes. This results agreed with the phenomena that spermidine promoted the expression of PR1a and a SAMDC inhibitor, MGBG, decreased the expression of PR1a in leaf discs. These results suggest that the resistance against fungal pathogen in transgenic tobacco impaired in ethylene production might be caused by increasing in polyamine, especially spermidine, biosynthesis.

• Korean Journal of Environmental Biology
• /
• v.18 no.1
• /
• pp.47-51
• /
• 2000

Phytophthora blight of pepper, which is caused by Phytophthora capsici Leonian, is not only the most destructive disease worldwide, but also difficult to control effectively. It has been needed to have new trials for effective control to the disease. We employed radiation hormesis of gamma ray as the new trial in the control strategy. Two cultivars, Kwangbok and Dabok, were used to analyse whether gamma ray radiation can induce disease resistance. The germination rate of pepper seeds was significantly enhanced by the radiation at all dose levels. Stimulatory effect for resistance induction was found to differ between cultivars. It was confirmed that the remarkable effect was induced in Dabok and depended on radiation dosage. Disease resistance at 4 Gy was much higher than that of control. On the other hand, no detectable induction effect for resistance was observed in Kwangbok which was moderate resistant cultivar to gamma ray radiation. [Hormesis, Gamma ray, Pepper, Phytophthora blight, Resistance induction].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.962-966
• /
• 2009

In this paper, N-way resistance power divider is described for wideband frequency characteristic. For this, we derived in design equation of a N-way resistance power divider using 3-way resistance power divider. We designed 8-way resistance power divider that can divide same power by 7 output and measurement result of fabricated resistance power divider is observed to prove the validity of derived design equation. Fabricated resistance power divider shown equal power division ratio and reflection loss displayed excellent characteristic by about -25dB in broadband from DC to 3GHz.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.3
• /
• pp.21-28
• /
• 2008

To evaluate the seismic performance of multi-degree of freedom(MDF) systems, repeated nonlinear response history analyses are often conducted, which require extensive computational efforts. To reduce the amount of computation required, equivalent single degree of freedom(SDF) systems representing complex multi-degree of freedom(MDF) systems have been developed. For the equivalent SDF systems, bilinear models and trilinear models have been most commonly used. In these models, the P-$\Delta$ effect due to gravity loads during earthquakes can be accounted for by assigning negative stiffness after elastic range. This study evaluates the adequacy of equivalent SDF systems having these hysteretic models to predict the actual response of steel moment resisting frames(SMRF). For this purpose, this study conducts cyclic pushover analysis, nonlinear time history analysis and incremental dynamic analysis(IDA) for SAC-Los Angeles 9-story buildings using nonlinear MDF models(exact) and equivalent SDF models(approximate). In addition, this study considers the strength limited model.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.196-202
• /
• 2007

In this paper, The TE(transverse electric) scattering problems by a resistive strip grating over a grounded dielectric plane with edge boundary condition are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical procedure. For a TE scattering problem, the induced surface current density is expected to the zero value at both edges of the resistive strip, then the induced surface current density on the resistive strip is expanded in a series of the multiplication of Gegenbauer(Ultraspherical) polynomials with the first order and functions of appropriate edge boundary condition. To verify the validity of the proposed method, the numerical results of normalized reflected power for the uniform resistivity R = 100 ohms/square and R = 0 as a conductive strip case show in good agreement with those in the existing papers.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.55-72
• /
• 2018

A method that can predict the mixed-ground condition ahead of a TBM tunnel face during tunnel construction utilizing electrical resistivity and induced polarization (IP) was proposed in this study. Effect of TBM advancement approaching the mixed-ground condition (composed of soil layer overlying rock layer) when currently running through soil zone on the electrical resistivity and IP measuring was assessed with laboratory-scale experiments. The resistivity and IP values were measured using four electrodes, by installing two electrodes on the tunnel face (at the cutterhead), and the other two electrodes on the segment lining. The test results showed that both of the measured resistivity and IP values were kept increasing as the TBM is approaching the soil-rock mixed-ground. Also, to get the more reliable results for predicting the mixed-ground condition, it was recommended that the measurement is made at the tunnel face utilizing 4-electrodes installed at the cutterhead as well as it is made utilizing the 2-electrodes installed at the segment lining along with the 2-electrodes installed on the tunnel face (at the cutterhead) so that two measured results are compared each other.