• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.867-874
• /
• 2011

The ballast abrasion occurs on the ballasted track upon bridges more than soil roadbed because the track vibration occurs a lot in the ballasted track upon bridges due to girder vibration when a train's weight is loaded onto track even though the identical ballast is used. The phenomena of mud pumping especially, which occurs when drainage is not properly secured for heavy rain, leads to the increase of maintenance work load and the decline of ride comfort. The ballast thickness range in domestic railroad construction rule is uniformly set up according to the design speed of railroad and passing tonnage of train without considering field conditions which is considered in foreign railroad companies. The purpose of this study is to verify the effect of vibration decrease by measuring the acceleration, displacement and ride comfort of ballasted track with the change of ballast thickness on the ballast tracked bridges and to suggest the optimal height of ballast on the Yocheon Bridge built for the test in Honam Line.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.850-853
• /
• 2009

통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서 국가 기술기준에 의한 유도전압 한계치가 정해져 있고, 현장 유도 대책 상 이 제한치를 초과할 때에 필요한 것이므로 정부 고시의 기술 근거에 의해 유도전압을 계산하여 이에 대한 조치를 시행하고 있다. 전자유도 현상에 있어서 피유도원인 통신선간의 커플링 관계에 있어서 중간 차폐를 줄 수 있는 성분에 대한 계수치를 적용할 수 있다. 고시에 의하면 고속전철 시설 중 국내의 건설기반이 되는 고가의 교량구간에 의한 차폐 계수를 사용할 수 있고 그 수치가 제시되어 있는 바 이 수치에 대한 실증적 연구 소요에 의하여 교량구간이 아닌 노반 구간과 교량 구간의 경계점에서 비교 측정을 수행하였고 교량에 의한 차폐효과가 현재 고시에 주어진 수치에 근접함을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.55-66
• /
• 1991

Presented is a study on the realistic determination of design loads and design criteria for bridge structures. The current bridge design code does not consider realistically the uncertainties inherent in loads and resistances and thus the level of safety varies greatly among the bridge spans. The resonable bridge design loads and design criteria which exhibit uniform reliability among various bridge spans are therefore derived in the present paper. The proposed design loads are determined from the analysis of numerous data obtained from actual traffic survey and the design criteria are based on the advanced concept of load and resistance factor format. The live load factors take into account resonably the effects of traffic volume increase. The proposed design loads and design criteria show uniform safety level for various bridge spans and reasonably consider the effects of traffic volume increase. The present study provides useful and valuable data for new version of our bridge design code.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.165-178
• /
• 2000

The simplified model for 3-dimensional analysis of vehicle-bridge interactions is presented in this study. By using the analysis model which includes the eccentricity of axle loads and the effect of the torsional forces acting on the bridge, the more accurate analysis results of the behavior of the bridge can be obtained. The equations of kinetic energy, potential energy and damping energy are expressed by degrees of freedom of the vehicle and the bridge. And then by applying Lagrange's equations of motion, the equations of motion of the vehicle and the bridge are obtained. By deriving the equations of forces acting on the bridge considering the vehicle-bridge vertical interactions and also by identifying the position of vehicle as time goes by, mass matrix, stiffness matrix, damping matrix and load vector of vehicle-bridge system are constructed in accordance with the position of vehicles. Then using Newmark's β-method(average acceleration), the equations of motion for the total vehicle bridge system are solved.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.19-27
• /
• 2002

Dynamic responses of a multi-span simply supported bridge are investigated to examine the effect of bearing damage under seismic excitations. The damaged bearings are modeled as sliding elements with friction between the superstructure and the top of the pier. Various values of the friction coefficients are examined to figure out the effect of damaged bearings with various levels of peak ground accelerations. It is found that the global seismic behaviors are significantly influenced by the occurrence of bearing damage. It should be noticed that the most possible location of unseating failure of superstructures differs from that in the bridge model without considering the bearing damage. It can be concluded that the bearing damage may play the major role in the unseating failure of a bridge system, so that the damage of bearings should be included to achieve more rational seismic safety evaluation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.94-101
• /
• 2019

Most of the existing rail structures have undergone a lot of aging since a considerable period of time has passed from completion. In particular, among existing railway bridges, many of the plate girder bridges are older bridges that have lived 40 to 60 years or more. Since the treadmill is directly connected to the girder without the ballast, the running load of the vehicle is directly transmitted to the bridge. Therefore, the shock and noise applied to the bridge are larger than those of the ballast bridge, and the dynamic shock and vibration are also relatively large. Therefore, it is very urgent to develop appropriate maintenance, repair and reinforcement technology for existing steel plate bridge. In this study, the authors introduced the characteristics of embedded rail (ERS) developed for improving the performance of the existing plate girder bridge and the techniques solving the vibration and noise problems. In order to evaluate the vibration and noise reduction performance of ERS, a non-ballast plate girder bridge with 5m length of sleepers installed and a plate girder bridge with ERS were fabricated. And, then, the vibration response generated under the same excitation condition was measured and analyzed. Also, the radiated noise analysis was performed using the vibration response data obtained from the experiment as the input data of the acoustic analysis model. As a result of experiments and analyses, it was confirmed that the plate girder bridge's vibration using ERS was reduced by 15.0~18.8dB and the average noise was reduced by 7.7dB(A) more than the non-ballast bridge.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.363-366
• /
• 2009

환경부는 2000년대에 들어 수질오염총량관리제의 정책 도입으로 하천과 호소의 수질개선에 노력을 기울이고 있으며, 개발사업과 관련된 비점오염원에서의 비점오염물질 관리를 요구하고 있다. 포장율이 높은 토지이용 변경사업, 즉 교량, 도로, 고속도로 등의 개발 사업은 특히 비점오염원 관리를 요구하고 있다. 그러나 현재 국내에 적용되고 있는 비점오염저감시설은 대부분 소규모 장치형 시설이며, 유지관리가 어렵고 저감효율이 낮은 단점이 있다. 최근에는 장치형 시설보다 생태친화적인 기능을 가지며 녹색 및 생태축 연결이 가능한 자연형 시설을 적용하는 방향으로 정책이 변화하고 있다. 이러한 조건과 더불어 기후변화에 능동적으로 대응하기 위해서는 교량의 경우 소규모 인공습지를 조성하여 녹색축 연결, 비점오염원 관리가 바람직하다. 따라서 본 연구는 도로와 교량의 녹색축을 연결하고 비점오염물질을 저감할 수 있는 소규모 HSSF 인공습지를 개발하고자 한다. 본 연구를 통해 개발된 소규모 HSSF 인공습지는 입자상 오염물질 제거를 위한 침강지, 용존성 및 미립자의 제거를 위한 습지부로 구성되어 있으며, 녹색축 및 생태공간 확보를 위한 습지의 식생부분이 존재하고 있다. 특히 본 기술은 교량내에서 처리하는 site control 방식으로 외부 유도를 통한 처리기술이 아니기에 비용경제적으로 효율성을 가지고 있다.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.251-259
• /
• 2014

The transition zone between an earthwork and a bridge effect to the vehicle's running stability because support stiffness of the roadbed is suddenly changed. The design criteria for the transition structure on ballast track were not particular in the past. However with the introduction of concrete track is introduced, it requires there is a higher performance level required because of maintenance and running stability. In this present paper, a transition structure reinforced with geosynthetics is suggested to improve the performance of existing bridge-earthwork transition structures. The suggested transition structure, in which there is reinforcing of the approach block using high-tension geosynthetics, has a structure similar to that of earth reinforced abutments. The utilized backfill materials are cement treated soil and gravel. These materials are used to reduce water intrusion into the approach block and to increase the recycling of surplus earth materials. An experiment was performed under the same conditions in order to allow a comparison of this new structure with the existing transition structure. Evaluation items are elastic displacement, cumulative settlement, and earth pressure. As for the results of the real-scale accelerated testing, the suggested transition structure has excellent performance for the reduction of earth pressure and settlement. Above all, it has high resistance the variation of the water content.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1222-1229
• /
• 2011

Railway bridges are divided into ballastless and ballast track bridges. The ballast abrasion occurs on the ballast track upon bridges more than soil roadbed because the track vibration occurs a lot in the ballast track upon bridges due to girder vibration when a train's weight is loaded onto track even though the identical ballast is used. The phenomena of mud pumping especially, which occurs when drainage is not properly secured for heavy rain, leads to the increase of maintenance work load and the decline of ride comfort. There are countermeasures such as ballast change, installation of cross-drainage for poor drainage, gutter establishment, ballast lifting methods, ballast mats and resilient sleepers laying for the mud pumping. The ballast thickness range in domestic railroad construction rule is uniformly set up according to the design speed of railroad and passing tonnage of train without considering field conditions which is considered in foreign railroad companies. The purpose of this study is to verify the effect of vibration decrease by measuring the acceleration, displacement and ride comfort of ballast track with the change of ballast thickness on the ballast track bridges and to suggest the optimal height of ballast on the Yocheon Bridge built for the test in Honam Line.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.35-42
• /
• 2001

본 연구는 변화곡률 수평 곡선보의 면외 자유진동에 관한 연구이다. 뒴과 회전관성을 고려한 변화곡률 수평 곡선보의 자유진동을 지배하는 상미분방정식이 유도되었고, 이 지배미분방정식을 수치해석하여 곡선보의 고유진동수를 산출하였다. 지배미분방정식을 수치적분하기 위하여 Runge-Kutta method를 이용하였고, 고유진동수를 산출하기 위하여 Regula-Falsi method와 결합한 행렬값 탐사법을 이용하였다. 본 연구의 이론적 타당성을 검증하기 위하여 타문헌의 고유진동수와 비교하였고, 실험실 규모의 모형실험을 실시하여 이론값과 실험값의 고유진동수를 비교하였다. 수치해석의 결과로 무차원 재변수들의 변화에 따른 무차원 고유진동수를 제 3모드까지 산출하였고, 그 결과들을 고찰하였다. 본 연구의 결과는 곡선형 교량 등과 같이 곡선부재로 이루어진 구조물의 설계시에 유용하게 이용될 수 있을 것으로 기대된다.