• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.132-138
• /
• 2007

Purpose: In Korea, the number of laparoscopy-assisted distal gastrectomies for early gastric cancer patients has been on the increase. Although minimally invasive surgery is more beneficial, no reported case of a total laparoscopic gastrectomy has been reported because of difficulty with intracorporeal anastomosis. This study attempts, through our experience, to determine the safety and feasibility of a total laparoscopic gastrectomy with various types of intracorporeal anastomosis using laparoscopic linears stapler in treating early gastric carcinomas. Materials and Methods: We investigated the surgical results and clinicopatholgical characteristics of 81 patients that underwent a totally laparoscopic distal gastrectomy at our department between June 2004 and May 2007. The intracorporeal anastomoses were performed by using laparoscopic linear staplers. Results: The mean operative time was 287 minutes, the mean anastomotic time was 40 minutes, and the mean number of laparoscopic linear staplers used for an operation was 7.5. The mean time to the first flatus, the first food intake, and discharge from hospital was 2.9, 3.6, and 10.3 days respectively. There were 11 cases of postoperative complications, but no case of postoperative mortality or conversion to an open procedure. In 75 patients with an adenocarcinoma, the mean number of lymph nodes harvested was 38.1 and the stage distribution was as follows: stage I, 72 patients; stage II, 2 patients; stage IV, 1 patient. During the mean follow-up period of 14 months, 5 patients died of other causes and there were no cases of cancer recurrence. Conclusion: A total laparoscopic gastrectomy with intracorporeal anastomosis by using a laparoscopic linear stapler was found to be safe and feasible. We were able to obtain acceptable surgical outcomes in terms of minimal invasiveness.

• Journal for History of Mathematics
• /
• v.22 no.2
• /
• pp.27-52
• /
• 2009

This article discusses the contributions of the leader Oswald Veblen, who was the president of AMS during 1923-1924. In 2006, Korea ranked 12th in SCIE publications in mathematics, more than doubling its publications in less than 10 years, a successful model for a country with relatively short history of modern mathematical research. Now there are 192 four-year universities in Korea. Some 42 of these universities have Ph.D. granting graduate programs in mathematics and/or mathematical education in Korea. Rapid growth is observed over a broad spectrum including a phenomenal performance surge in International Mathematical Olympiad. Western mathematics was first introduced in Korea in the 17th century, but real significant mathematical contributions by Korean mathematicians in modern mathematics were not much known yet to the world. Surprisingly there is no Korean mathematician who could be found in MaC Tutor History Birthplace Map. We are at the time, to have a clear vision and leadership for the 21st century. Even with the above achievement, Korean mathematical community has had obstacles in funding. Many people thinks that mathematical research can be done without funding rather unlike other science subjects, even though they agree fundamental mathematical research is very important. We found that the experience of early American mathematical community can help us to give a vision and role model for Korean mathematical community. When we read the AMS Notice article 'The Vision, Insight, and Influence of Oswald Veblen' by Steve Batterson, it answers many of our questions on the development of American mathematics in early 20th century. We would like to share the story and analyze its meaning for the development of Korean Mathematics of 21st century.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.3
• /
• pp.72-87
• /
• 2018

This study highlights a drainage gate and a ditch, which existed around the whole area of the western shore of Wolji Pond(月池) and focuses on a possible connection between the drainage facility on the western shore and the historical drainage system of Wolji Pond. Specifically, it primarily considered locations and the form of a drainage gate, the relationship between northwestern ditch of Wolji Pond and the drainage gate, and the establishment period and the character of the drainage facility on the western shore. The drainage gate found in excavation in 1975 is determined as the same facility as Surakgu(水落口) recorded on an actual measurement drawing, 1922. Therefore, it is highly probable that there were already the drainage facility in the western shore of Wolji Pond before the 1920s. The drainage gate constructed by processing rectangular stones has four drainage holes for controlling water level. The way of the drainage through the drainage holes is the same as that of the northern shore of Wolji Pond. From a cadastral map drawn in 1913, it is found that the ditch existed in northwest of Wolji Pond. The ditch was proximate to the drainage gate and shared the same axes. Hence, the ditch and the drainage gate are determined as a organic facility connected to the drainage system of Wolji Pond. In particular, the ditch existed in northwest of Wolji Pond is the basis for judging that the drainage facility in the western shore were established before the 1910s. Water flowed in through drainage holes of the drainage gate is drained into the northwest of Wolji Pond, through the ditch. The establishment period and the intention of the drainage facility on the western shore can be interpreted in two aspects. First, they might be 'a agricultural irrigation facility in the Joseon era', given that Wolji Pond was recorded as a agricultural reservoir, and that the whole northwestern area of Wolji Pond was used as farm land areas. Second, they might be 'a drainage facility for controlling the water level in creating Wolji Pond', given that the drainage gate was annexed to the lower shore forming the waterline of Wolji Pond, and that the hight of drainage holes on top of the drainage gate was similar to the full water level of Wolji Pond. Considering the related grounds and circumstance, the latter possibility is high.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.186-203
• /
• 2015

This article attempts to examine both the outcome and future task of the art history research on Central Eurasia, better known under the name of "Silk Road". The term Central Eurasia encompasses Xinjiang Uygur, Tibet, Mongolia, former Soviet Republics, the northwest region of India, Iran and Turkey. The article analyzes the 30-year history of the region's art history research and further presents a desirable direction that the study should move towards. Though short in its research period, the ROK's art history study on Central Eurasia has shown eye-catching achievement in several areas such as the northwest region of India and the Xinjiang Uygur, Dunhwang of China. Two factors allowed for this accomplishment. First was the actual improvement of the work environment, where the scholars were finally able to travel to Central Eurasia and explore the historic sites for themselves since 1990. More important was the 'arena of study' for the next-generation scholars made possible by institutions like The Korean Association for Central Asian Studies and the Center for Central Eurasian Studies. Slowly but consistently, the two academic societies induced scholars' attention towards the field and fostered new experts. Circumstances changed, marking 2012 as the starting point. International academic forums held by the government branches surged in number. The intention behind it was to link the ROK with the Silk Road and ultimately to obtain the "Eurasia initiative". As of now, the public has shown heightened interest in the issue. The academia is subsequently riding on this second "wave of interest" following the first wave in the 1980s. However, increased popularity comes with some negative consequences, and this art history research on Central Eurasia is no exception. There are criticisms regarding the objectivity of recent academic forums. Some argue that the aim of the forums are sternly set most of the times, prohibiting the presenters to voice their own perspectives. Still, this heated attention will definitely play its role as a stepping stone for further development. The academia should commit to fostering rising researchers who will systemically and professionally study the field. This is imperative in order for the Korean culture to successfully communicate with the world and take itself to a new level. Without completing this task, the ROK's art history research on Central Eurasia is likely to remain idle.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.377-388
• /
• 2023

Carbon management is emerging as an important factor for global warming control, and land use change is considered one of the causes. To quantify the changes in carbon stocks due to development, this study attempted to calculate carbon storage by borrowing the formula of the InVEST Carbon Storage and Sequestration Model (InVEST Model). Before analyzing carbon stocks, a carbon pool was compiled based on previous studies in Korea. Then, we estimated the change in carbon stocks according to the development of Osong National Industrial Park (ONIP) and the application of alternatives. The analysis shows that 16,789.5 MgC will be emitted under Alternative 1 and 16,305.3 MgC under Alternative 2. These emissions account for 44.4% and 43.1% of the pre-project carbon stock, respectively, and shows that choosing Alternative 2 is advantageous for reducing carbon emissions. The difference is likely due to the difference in grassland area between Alternatives 1 and 2. Even if Alternative 2 is selected, efforts are needed to increase the carbon storage effect by managing the appropriate level of green cover in the grassland, creating multi-layered vegetation, and installing low-energy facilities. In addition, it is suggested to conserve wetlands that can be lost during the stream improvement process or to create artificial wetlands to increase carbon storage. The assessment of carbon storage using carbon pools by land cover can improve the objectivity of comparison and evaluation analysis results for land use plans in Environmental Impact Assessment and Strategic Environmental Impact Assessment. In addition, the carbon pool generated in this study is expected to be used as a basis for improving the accuracy of such analyses.

• Advances in pediatric surgery
• /
• v.8 no.2
• /
• pp.143-155
• /
• 2002

A survey on biliary atresia was made among 26 members of the Korean Association of Pediatric Surgeons. The members were required to complete a questionnaire and a case registration form for each patient during the twentyone-year period of 1980-2000. Three hundred and eighty patients were registered from 18 institutions. The average number of patients per surgeon was one to two every year. The male to female ratio was 1:1.3. The age of patients on diagnosis with biliary atresia was on average $65.4{\pm} 36.2$ days old. The national distribution was 32.8% in Seoul, 25.3% in Gyoungki-Do, 21.6% in Gyoungsang-Do, 9.27% in Choongchung-Do, etc. in order. The most common clinical presentation was jaundice (98.4%) and change of stool color (86.2%) was second. Two hundred eighty (74.7%) of 375 patients were operated by 80 days of age. Three hundred thirty six (9 1.9%) of 366 patients were operated on by the original Kasai procedure, and 305 (84.3%) of 362 patients were observed by bile-drainage postoperatively. The overall postoperative complication rate was 18.5% and the overall postoperative mortality rate was 6.8%. The associated anomalies were observed in 72 cases (22.5%). One hundred ninty five (64.7%) of 302 patients have been alive in follow-up and 49 (25.1%) have survived over 5 years without problem after operation. Ascending cholangitis, varices and ascites affected survival significantly, and the important long-term prognostic factor was the occurrence of complications.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.3
• /
• pp.235-245
• /
• 2008

Purpose: The HSV1-tk gene has been extensively studied as a type of reporter gene. In hepatocellular carcinoma (HCC), only a small proportion of patients are eligible for surgical resection and there is limitation in palliative options. Therefore, there is a need for the development of new treatment modalities and gene therapy is a leading candidate. In the present study, we investigated the usefulness of substrate, 2'-fluoro-2'-deoxy-1-${\beta}$-D-arabino-furanosyi-5-[$^{124/125}I$]iodo- uracil ([$I^{124/125}I$]FIAU) as a non-invasive imaging agent for HSV1-tk gene therapy in hepatoma model using small animal PET. Material and Methods: With the Morris hepatoma MCA cell line and MCA-tk cell line which was transduced with the HSV1-tk gene, in vitro uptake and correlation study between [$^{125}I$]FIAU uptake according to increasing numeric count of percentage of MCA-tk cell were performed. The biodistribution data and small animal PET images with [$^{124}I$]FIAU were obtained with Balb/c-nude mice bearing both MCA and MCA-tk tumors. Results:, Specific accumulation of [[$^{125}I$]FIAU was observed in MCA-tk cells but uptake was low in MCA cells. Uptake in MCA-tk cells was 15 times higher than that of MCA cells at 480 min. [$^{125}I$]FIAU uptake was linearly correlated (R2 =0.964, p =0.01) with increasing percentage of MCA-tk numeric cell count. Biodistribution results showed that [$^{125}I$]FIAU was mainly excreted via the renal system in the early phase. Ratios of MCA-tk tumor to blood acting were 10, 41, and 641 at 1 h, 4 h, and 24 h post-injection, respectively. The maximum ratio of MCA-tk to MCA tumor was 192.7 at 24 h. Ratios of MCA-tk tumor to liver were 13.8, 66.8, and 588.3 at 1 h, 4 h, and 24 h, respectively. On small animal PET, [$^{124}I$]FIAU accumulated in substantial higher levels in MCA-tk tumor and liver than MCA tumor. Conclusion: FIAU shows selective accumulation to HSV1-tk expressing hepatoma cell tumors with minimal uptake in normal liver. Therefore, radiolabelled FIAU is expected to be a useful substrate for non-invasive imaging of HSV1-tk gene therapy and therapeutic response monitoring of HCC.

• Journal of Intelligence and Information Systems
• /
• v.27 no.2
• /
• pp.33-54
• /
• 2021

With the fourth industrial revolution and the arrival of the New Normal era due to Corona, the importance of Non-contact technologies such as artificial intelligence and big data research has been increasing. Convergent research is being conducted in earnest to keep up with these research trends, but not many studies have been conducted in the area of nuclear research using artificial intelligence and big data-related technologies such as natural language processing and text mining analysis. This study was conducted to confirm the applicability of data science analysis techniques to the field of nuclear research. Furthermore, the study of identifying trends in nuclear spent fuel recognition is critical in terms of being able to determine directions to nuclear industry policies and respond in advance to changes in industrial policies. For those reasons, this study conducted a media trend analysis of pyroprocessing, a spent nuclear fuel treatment technology. We objectively analyze changes in media perception of spent nuclear fuel dry treatment techniques by applying text mining analysis techniques. Text data specializing in Naver's web news articles, including the keywords "Pyroprocessing" and "Sodium Cooled Reactor," were collected through Python code to identify changes in perception over time. The analysis period was set from 2007 to 2020, when the first article was published, and detailed and multi-layered analysis of text data was carried out through analysis methods such as word cloud writing based on frequency analysis, TF-IDF and degree centrality calculation. Analysis of the frequency of the keyword showed that there was a change in media perception of spent nuclear fuel dry treatment technology in the mid-2010s, which was influenced by the Gyeongju earthquake in 2016 and the implementation of the new government's energy conversion policy in 2017. Therefore, trend analysis was conducted based on the corresponding time period, and word frequency analysis, TF-IDF, degree centrality values, and semantic network graphs were derived. Studies show that before the 2010s, media perception of spent nuclear fuel dry treatment technology was diplomatic and positive. However, over time, the frequency of keywords such as "safety", "reexamination", "disposal", and "disassembly" has increased, indicating that the sustainability of spent nuclear fuel dry treatment technology is being seriously considered. It was confirmed that social awareness also changed as spent nuclear fuel dry treatment technology, which was recognized as a political and diplomatic technology, became ambiguous due to changes in domestic policy. This means that domestic policy changes such as nuclear power policy have a greater impact on media perceptions than issues of "spent nuclear fuel processing technology" itself. This seems to be because nuclear policy is a socially more discussed and public-friendly topic than spent nuclear fuel. Therefore, in order to improve social awareness of spent nuclear fuel processing technology, it would be necessary to provide sufficient information about this, and linking it to nuclear policy issues would also be a good idea. In addition, the study highlighted the importance of social science research in nuclear power. It is necessary to apply the social sciences sector widely to the nuclear engineering sector, and considering national policy changes, we could confirm that the nuclear industry would be sustainable. However, this study has limitations that it has applied big data analysis methods only to detailed research areas such as "Pyroprocessing," a spent nuclear fuel dry processing technology. Furthermore, there was no clear basis for the cause of the change in social perception, and only news articles were analyzed to determine social perception. Considering future comments, it is expected that more reliable results will be produced and efficiently used in the field of nuclear policy research if a media trend analysis study on nuclear power is conducted. Recently, the development of uncontact-related technologies such as artificial intelligence and big data research is accelerating in the wake of the recent arrival of the New Normal era caused by corona. Convergence research is being conducted in earnest in various research fields to follow these research trends, but not many studies have been conducted in the nuclear field with artificial intelligence and big data-related technologies such as natural language processing and text mining analysis. The academic significance of this study is that it was possible to confirm the applicability of data science analysis technology in the field of nuclear research. Furthermore, due to the impact of current government energy policies such as nuclear power plant reductions, re-evaluation of spent fuel treatment technology research is undertaken, and key keyword analysis in the field can contribute to future research orientation. It is important to consider the views of others outside, not just the safety technology and engineering integrity of nuclear power, and further reconsider whether it is appropriate to discuss nuclear engineering technology internally. In addition, if multidisciplinary research on nuclear power is carried out, reasonable alternatives can be prepared to maintain the nuclear industry.