• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.531-534
• /
• 2002

위치 기반 광고란 휴대폰, PDA(Personal Digital Assistant), 노트북 PC 등 위치 획득이 가능한 단말의 위치 정보를 이용하여 광고를 하는 것으로 위치 추적이 가능한 단말의 위치 정보를 활용하여 부가정보를 서비스하는 위치 기반 서비스 (LBS, Location Based Services)의 한 종류이다. 최근의 이동 통신 기술의 발달과 휴대폰, PDA 등 모바일 단말의 급속한 확산으로 인하여 LBS 는 유무선 인터넷의 응용 및 그를 이용한 부가 가치 창출에 있어 핵심적인 역할을 할 것이며, 특히 위치 기반 광고는 LBS 시장의 상당 부분을 차지할 것으로 예상되고 있다. 이러한 위치 기반 광고는 광고를 저장하고 관리하는 광고 ASP (Application Service Provider) 플랫폼에서 단말의 위치 정보를 저장 및 관리하는 LBS 플랫폼을 참조하여 위치 및 시간에 따라 광고의 대상이 되는 사용자 목록을 얻고, 해당 사용자에 대하여 단문 메시지 또는 멀티미디어 광고를 제공함으로써 이루어질 수 있다. 본 논문에서는 현재 많이 사용되고 있는 단문 메시지 서비스 (SMS, Short Message Services)를 사용하여 위치 기반 광고를 제공할 수 있는 광고 ASP 플랫폼을 설계한다. 이를 위해 광고 ASP 플랫폼이 제공하여야 하는 기능과 위치 기반 광고의 처리 흐름을 분석한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.151-162
• /
• 1991

This study aims to improve the positioning accuracy by analizing the accuracys of three dimensional positioning according to various data types and preprocessing levels of SPOT imagery and the acquisition method for ground control points, and to develop the three dimensional positioning algorithm and program. In this study, the optimum polynomials of exterior orientation parameters according to each preprocessing levels (level 1B; 15 variables, level 1AP, 1A; 12 variables) are determined. As a results, the accuracy of level lAP is the best in the results of analysis about the accuracy of positioning, but level 1A which is digital image data form also shows similar positioning accuracy. Also, in level 1A image which have different acquisition method for ground control points, the accuracy of three dimensional positioning is highly improved. But, in case of low accuracy of ground control points, only introduction of additional parameters does not effect to the improvement of accuracy. Therefore simultaneous adjustment including blunder detection method should be adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.8
• /
• pp.643-650
• /
• 2014

Recently, the wireless communication applications are studied in various environment by the development of short range communication system like wireless sensor networks. This paper presents the analysis of localization schemes for ship application using received signal strength. The localization schemes using received signal strength from wireless networks are classified under two methods, which are Range based method and Range free method. Range based methods estimate the location with least square estimation based on estimated distance using path-loss model. Range free methods estimated the location with the information of anchor nodes linked to target. Simulation results show the appropriate localization scheme for each cabin environments based on the empirical path-loss model in warship's internal space.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.23-34
• /
• 2002

Various tries are in progress to expand the usability of wireless telecommunication harminized internet technology. The most typical example among those services is LBS(Location Based Service). Nowaday, Standards for telecommunication system of LBS centers round on 3GPP(3rd Generation Partnership Project) and 3GPP2. In this paper we compare the telecommunication system of 3GPP and 3GPP2 in order to make domestic standards of telecommunication system to provide LBS. First, we investigate network models and interfaces of GSM(Global System for Mobile) and ANSI(America National Standard Institute)-41/PCS1900 - Telecommunication type of 2nd generation. Also we consider those of UMTS (Universal Mobile Telecommunication System) and cdma2000 - Telecommunication type of 3nd generation. Then we analysis function components for LBS of each network models details.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.211-218
• /
• 2020

The radio wave propagation characteristics of the transmitter and receiver position change in the indoor environment were predicted through simulation, then the results obtained through the transmission loss measurement were compared and analyzed with the simulation results. The conference room was chosen as the environment for measuring transmission loss, and the radio transmission characteristics of the two environments were compared by selecting the exhibition hall without interior decorations and fixtures. In each indoor environment, the position of the transmitter chose two cases. One located in the center of the front wall and the other in the center of the side wall, and the position of the receiver moved along the centerline of the conference room and the side wall, measuring the receiving power. For each change in transmitter-receiver position, received power of 3GHz and 6GHz band were measured and compared with the simulation forecast results. The changes in received power at each receiving point were analyzed according to the location of the transmitter and the frequency band variation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.213-219
• /
• 2013

Recently, with the rapid advancement in information and communication technology, indoor location-based services(LBSs) that require precise position tracking have been actively studied with outdoor-LBS using GPS. However, in case of a ship which consists of steel structure, it is difficult to measure a precise localization due to significant ranging error by the diffraction and refraction of radio waves. In order to reduce location measurement errors that occur in these indoor environments, this paper presents distance compensation algorithms that are suitable for a narrow passage such as ship corridors without any additional sensors by using UWB(Ultra-wide-band), which is robust to multi-path and has an error in the range of a few centimeters in free space. These improvement methods are that Pythagorean theory and adjacent node technique are used to solve the distance error due to the node deployment and distance variation analysis technique is applied to reduce the ranging errors which are significantly fluctuated in the corner section. The experimental results show that the number of nodes and the distance error are reduced to 66% and 57.41%, respectively, compared with conventional CSS(Chirp spread spectrum) method.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.20-27
• /
• 2017

The present paper describes the flow analysis of the flows around the multicopter for the selection of optimal position of air data sensor. For the flow analysis, the commercial fluid dynamics solver, STAR-CCM+ was used with polygon mesh and k-w SST turbulence modeling options. For the simulation of each rotating 4 propellers, unstructured overset mesh method was used. Hovering, forward flight, ascending and descending flight conditions are selected for the analysis and airspeed and flow angle errors were investigated using the CFD results. Through the flow field analysis, sensor location above one propeller diameter distance from the propeller rotating plane showed airspeed error less than 1m/s within the typical flight conditions of multicopter except descending.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.746-756
• /
• 2013

The emitter geolocation method using the time difference of arrival (TDOA) and the frequency difference of arrival (FDOA) has more accurate performance comparing to the single TDOA or FDOA based method. The estimation performance varies with the sensor paring strategies, the deployment and velocities of the sensors. Therefore, to establish effective strategy on the electronic warfare system, it is required to analyze the relation between the estimation accuracy and the operational condition of sensors. However, in the conventional non-iterative method, the restriction of the deployment of sensors and the reference sensor exists. Therefore, we derive the emitter geolocation method based on a Gauss-Newton method which is available to apply to any various sensor pairs and the deployment and velocities of the sensors. In addition, simulation results are included to compare the performance of geolocation method according to the used measurements: the combined TDOA/FDOA, TDOA, and FDOA. Also, we present that the combined TDOA/FDOA method outperforms over single TDOA or FDOA on the estimation accuracy with the CEP plane.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.684-684
• /
• 2012

하천유량측정은 불가피하게 사교형태의 교량에서 측정을 해야하는 경우가 적지 않다. 이러한 교량에서의 유량측정은 수위-단면적이 과대산정되어 유량 역시 크게 산정되므로 이에 대한 보정을 필요로 한다. 본 연구에서는 왕숙천에 위치한 퇴계원 수위관측소 하류 400m 위치에서의 도섭법을 통한 횡단면 측선각도 변화에 따른 유량차의 비교와 오산천에 위치한 약 $45^{\circ}$ 사교(탑동대교)의 탑동 수위관측소 위치의 교량법을 이용한 유량측정 성과, 한탄강에 위치한 약 $15^{\circ}$ 사교(한탄대교)의 전곡 수위관측소 상류 1km에 위치한 한탄대교에서의 교량법 측정 성과에 따른 유량차를 비교 분석하였다. 한강유역 왕숙천, 오산천, 한탄강에 위치한 퇴계원 지점, 탑동 지점, 전곡 지점에서 실시간 수위에 따른 유속을 측정하였으며, 퇴계원 지점에서는 횡단면에 직각인 측선을 기준 값으로 제시하고, 횡단방향각의 정도를 $10^{\circ}$, $30^{\circ}$, $50^{\circ}$으로 늘려 산정을 하였고, 탑동과 전곡 지점에서는 사교에서의 횡단각을 측정하여 사교의 각을 산정한 후 보정 전 후의 유량 값을 비교 분석하였다. 측정에 사용된 기기는 Price AA 유속계이고, 측정방법은 도섭법과 교량법을 적용하였다. 그 결과 직각인 측선에서 측정한 유량보다 사교형태에서 측정한 유량이 크게 산정되었다. 각 지점의 보정전 후 유량비는 탑동 지점 약 41.42%, 전곡 지점 약 3.53%로 산정되어 $15^{\circ}$ 사교의 전곡 지점에 비해 $45^{\circ}$ 사교의 탑동 지점의 보정전 후 유량차이가 크게 나타남에 따라 각이 클수록 유량 역시 과대하게 산정됨을 알 수 있었다. 따라서 유량측정을 실시할 경우 유량의 흐름방향을 기준으로 직각의 유량측정을 실시하여 유량을 산정하되 부득이한 경우로 사교에서의 측정이 이루어졌을시 흐름 방향을 기준으로 각도를 측정하여 크게 나타나는 수위-단면적에 각보정하여 유량을 산정함이 오차를 줄일 수 있으며, 신뢰성 있는 유량자료 생산의 방법이라 할 수 있겠다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.551-562
• /
• 2009

In this paper, I would present a using method for The Fishing Operation Information(FOI) of National Federation of Fisheries Cooperatives(NFFC) through the availabilities analysis and put out the similarities by the section of the sea through classifying characteristics of fishing patterns by their locations. As a result, although the catch of FOI is nothing more than 33% level to National Fishery Production Statistics(NFPS), FOI data is useful in understanding the patterns of fishing operation by the location because both patterns and correlation were very similar in the usability analysis, comparing the FOI data with NFPS. So I classified optimal clusters for catch, the number of fishing days and the number of fishing vessels through 2 step cluster analysis by the big marine zone and divided fishing patterns.