• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.120-126
• /
• 2019

Recently, there is an increasing need for highly precise processing with the rapid development of precision machinery, electrical and electronics, and semiconductor industries. Cutting machine control relies on the operator's sense and experience in tradition, but it has been greatly enhanced by the adoption of CNC(Computerized Numeric Controller). In addition, cutting dynamics technology has been paid attention to reflect the operating state of machine in real time. This paper presents a method to detect and stabilize tool vibration by attaching an acoustic sensor to a CNC machine. The sensed acoustic data is synchronized with the tool position and the abnormal vibration frequency is separated from the collected acoustic frequency, then analyzed to detect the tool vibration. Also the reliability the tool vibration detection and stabilization is improved by applying the cutting dynamic method. The proposed method is analyzed and evaluated in terms of the surface roughness.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.5
• /
• pp.81-91
• /
• 2009

Recently, Chein et al proposed the ultralightweight strong authentication and strong integrity (SASI)protocol, where the tag requrires only simple bitwise operations. Since the tag does not support random number generator to generate a challenge nonce, an attacker can replay old messages and impersonate reader. However, all of the previous ultralightweight authentication schemes are vlunerable to various attacks: de-synk, eavesdropping, impersonating, tracking, DoS, disclosure etc. we analyze the problems of previous proposed ultrlightweight protocols, to overcome these security problems by using PRNG on the tag. Therefore, in this paper we propose a new lightweight RFID mutual authentication protocol that provides random number generator and bitwise operations, a security and an efficiency of the proposed schme analyze.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.61-68
• /
• 2020

7-tonf turbopump real-propellant tests in Naro Space Center were conducted and high-frequency signals from an accelerometer and pressure sensors installed on the casing and the inlet/outlet pipeline of LOX pump were analyzed to estimate the structural and hydrodynamic stabilities. Waterfalls, frequency spectrums and RMS(Root Mean Square) values of the measured signals were calculated and characteristic instability frequencies by the rotating cavitation and the rear floating ring seal(F.R.S) were investigated. Static pressures of the inlet/outlet pipeline and an acceleration of the pump casing are strongly affected on pressure fluctuation induced by the rear floating ring seal in the leakage path. Despite the acceleration RMS value seems totally small, the rotating-speed-related synchronous frequency affecting the shaft instability is distinctly observed in the frequency contour.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.79-86
• /
• 2023

Construction is one of the oldest fields of providing human living comfort. However, despite the continuous development not only in IT but also in other fields, productivity degradation due to low automation is still serious. In particular, the use of the 4th industrial revolution technologies in construction is just beginning. Blockchain, which is one of the 4th industrial revolution technologies, is a type of a distributed database that is used to replicate, share, and synchronize data spread across different geographical locations, such as multiple sites, countries, or organizations. In this paper, we introduce the block chain and analyze use cases according to seven themes in construction. As a result of the analysis, it is expected to increase the understanding of blockchain in construction and provide usefulness for the development of various services in the future.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.95-103
• /
• 2022

In this paper, the efficiency of a sensorless method with square-wave injection for a low-cost inverter, so called B4 inverter is presented. This inverter comprises only 4 switches to reduce system cost. It is distinguished from the conventional B6 inverter that has 6 of switching elements. The B4 inverter, injected a 1 kHz of harmonic wave, has been modelled using the functions and library in Matlab/Simulink. This paper described each component of sensorless algorithm. Among them, the Notch Filter is used to extract the harmonic component of the phase current and a second-order low-pass filter was used to reduce the ripple of the estimated speed. It is shown through simulation that the rotor angle of a permanent magnet synchronous motor is detected by multiplying the current waveform extracted using the notch filter by the harmonic voltage. The feasibility of the proposed method is shown through Simulink simulation.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2023

This study aims to determine how agricultural drones are operated for flight tests using a 5G communication in order to carry out a mission such as sensing agricultural crop healthy status with special cameras. Drones were installed with a multi-spectral and IR camera to capture images of crop status in separate altitudes with different speeds. A multi-spectral camera can capture crop image data using five different particular wavelengths with a built-in GPS so that captured images with synchronized time could provide better accuracy of position and altitude during the flight time. Captured thermal videos are then sent to a ground server to be analyzed via 5G communication. Thus, combining two cameras can result in better visualization of vegetation areas. The flight test verified how agricultural drones equipped with special cameras could collect image data in vegetation areas.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.503-508
• /
• 2023

The purpose of this study was to examine the impact of emotional intelligence and cognitive emotion regulation strategies on career maturity among university students during this period of increasing employment challenges. The study participants consisted of 348 students who attended general education courses at a 4-year N University located in Chungnam. The analysis was conducted using SPSS 26.0, and descriptive statistics, correlation analysis, and regression analysis were applied. The research findings indicated a significant correlation between emotional intelligence and cognitive emotion regulation strategies with career maturity among university students. The results suggested that positive thinking and motivation related to their emotions and feelings could enhance career maturity. Based on these findings, it is expected that various research and programs aiming to enhance career maturity will be promoted in the future. Additionally, the study aspires to serve as foundational data in devising concrete and achievable strategies for career and employment fields.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.27-33
• /
• 2024

According to the success of the Nuri Space Launch Vehicle (KSLV-II) and the development goal of the next generation space launch vehicle (KSLV-III), it is expected that the domestic geostationary satellite capability will be increased from (1 to 3.7) ton. Also, it is predicted that substantial ability of about 1 ton can be provided for the space exploration of the Moon, Mars, asteroids, etc. The Goheung space launch site is optimized for sun-synchronous small satellites, and due to the essential precondition that the launch trajectory does not impinge another country's sovereign airspace, it is not satisfactory as a geostationary satellite launching site. Its latitude also requires more energy to shape the rotating orbital plane from the initial injection status. This results in a decreasing factor of economic feasibility, including the operating complexity. Therefore, in parallel with the development of a next generation space launch vehicle, the practical process for acquisition of oversea land or sea space launch site near the Earth's equator and research for the optimization of orbiting methods of geostationary satellite injection must be continued.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.277-284
• /
• 2006

The purpose of this study was to examine the perception of dental hygiene freshmen about their major and their occupational consciousness. The subjects in this study were 361 dental hygiene freshmen at three different colleges in Gyeonggi province. After a survey was conducted, the collected data were analyzed with SPSS WIN 11.5 program. The findings of the study were as follows: 1. As for their view of occupation, the students made a well-paying job a priority(M = 2.97), and looked upon an occupation as a means of living(M = 1.60). Regarding the use of the profits of dental hospitals and clinics, they believed that they should reinvest their profits in a purchase of machinery, an expansion of facilities or technical development(M = 2.00). 2. Concerning relations between their motivation of college entrance and their satisfaction with their major, 96.6 percent of those who found their major satisfactory or quite satisfactory considered it to right up with their alley. 82.6 percent of them chose their major to get a stable job, and 62.8 percent of them did it through the advice of their families, relatives or regular teachers. 59.1 percent of them did it in consideration of their college entrance examination scores. Every student who were pressed for economic reasons to choose their major were unsatisfied with it. Thus, their motivation of college entrance made a statistically significantly wide difference to their satisfaction with major(p < 0.01). 3. They got a mean of 3.10 in occupational consciousness. By sub- category, they scored highest in interpersonal and work ethics(3.19 respectively). They got a mean of 3.04 in academic ethics, and got a mean of 2.99 in professional ethics, which was the lowest mark. 4. As to connections between their general characteristics and occupational consciousness, their occupational awareness was significantly different according to their motivation of college entrance and information they acquired at the time of college entrance(p < 0.05). In regard to the relationship of their satisfaction with major to their occupational awareness, their occupational consciousness statistically significantly varied with their department, their willingness of staying as a dental hygienist, the future prospect of dental hygienist (p < 0.01).

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.32-51
• /
• 2007

Serial violent crimes have occurred more frequently. Additional attention is paid to relevant areas in which discussions has also increased. This study analyzed Young-cheol Yoo, serial killer case. Two of Yoo's crimes were studied for modus operandi. The cases selected were the premeditated break-in homicide of upper-class elderly people and the impulsive homicide of the Hwanghak-Dong street vendor. Crime motives, targets, times, places, means and methods were analyzed. Profiling techniques in Young-cheol Yoo cases were evaluated and the problems discovered during investigation were discussed. The followings are the findings of the analysis of the serial killer Yoo cases. Yoo exhibited a hatred toward the rich, the elderly, and women as well as a fear of diseases and death. Yoo's crime targets were the elderly residing in wealthy houses, street vendors and prostitutes. The numbers of victims were: 3 men and 5 women victims in 4 homicide cases involving the elderly residents in wealthy houses; one man in 1 street vendor homicide case 11 women in 11 prostitute homicide cases, so total 20 persons were murdered in 16 cases. The time of the crimes were between 10 am and noon in the homicide cases of the elderly and very late at night or early in the morning in the prostitute homicide cases. Means and methods facilitated include the use of a knife as a threat and a hammer made by Yoo to strike the head and face of victims. In the homicide cases involving the elderly, he attempted to disguise the crime scene as a burglary or committed arson to destroy the evidence; in the prostitute homicide cases, bodies were mutilated and buried in secret. 1) Generally each serial killer case has different characteristics, motives, and purposes; while some serial killer cases involve similar methods, others use different methods. Unlike other crimes, serial killers' characteristics and tastes are very different, so it is difficult to explain serial killings based on a specific model. It is important to accurately capture modus operandi of each serial killing and for detectives to familiarize themselves with them. The process of tracing and use of imagination which follows a serial killer's psychology and thought must be used to find out what kind of thoughts pushed the killer to commit the crime. In order to investigate and research difficult subjects such as serial killing, various methods, skills, and relevant knowledge should be studied, and institutional endeavors should go hand in hand with individual efforts.