• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.206-211
• /
• 1987

본 논문에서는 입력 신호인 정현파의 위상을 PGZC(positive going zero corssing)에 대해 한주기당 2회씩 추적하도록 하는 디지털 위상도기 회로(DPLL)을 제시한다. 제시된 루루프는 한 주기당 2번의 표본화를 갖도록 함으로써 한 주기당 하나의 표본을 취하는 기존의 DPLLqhek 정상 상태에서의 위상오차 변동범위가 전체적으로 1/2로 감소되었고, 연속 표본들간의 오차와 양자화 준위의 선택에 따라서 루우프의 천이 응답이 좋아짐을 알 수 있었다. 그 해석적 결과를 실제적으로 요구되는 조건류에 대하여 컴퓨터 시뮬레이션을 행함으로써 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1149-1155
• /
• 2007

In this paper, we propose a new overlap and add speech synthesis method which demonstrates improved continuity performance. The proposed method uses a weighted phase error function and minimizes the wave discontinuity of the synthesis signal, rather than the phase discontinuity, to estimate the mid-point phase. Experimental results show that the proposed method improves the continuity between the synthesized signals relative to the existing method.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.453-460
• /
• 1995

본 논문에서는 정현파 소음을 제어하기 위한 filtered-x LMS에 바탕을 둔 새로운 적응 알고리듬을 제안하였다. 이러한 알고리듬은 두개의 연속적인 계수조정 식으로, 제어기의 계수를 조정한다. 서로 독립인 각 주파수별로 처리하기 때문에 빠른 수렴을 얻을 수 있다. 두번째식은 이차경로로 인한 위상지연을 추정한다. 정현 파 신호 주파수보다 4배 이상 빠른 표본화 주파수를 선택하여 추정된 위상지연 추정 값은 $2{\pi}f_0$만큼 오차를 나타내며, 이 값은 $\pi$2보다 작다. 정현파 신호의 주파수를 알면 이러한 오차는 $2{\pi}f_0$를 더함으로써 제거할 수 있다. 이러한 방법은 위상지연이 $\pi$2보다 큰 경우 수렴속도를 증가시킨다는 사실을 실험을 통하 여 알 수 있다. 추정된 위상지연은 제어기 계수값을 조정하는데 필요한 필터링된 참조신호를 발생시키믄데 사용된다. 참조신호의 위상지연이 각 주파수 성분별로 수행 되기 때문에, 콘볼루션 연산이 생략되어 계산량을 줄일 수 있다. 또한 연속적으로 위상지연을 추정하기 때문에 시변 상황에 적용이 가능하다. 조정식의 수렴조건을 유도하였다. 제안된 알고리듬은 제어기 계수를 추정하는데 바이어스가 없으며, 위상 지연추정을 위한 수렴상수의 최대허용치는 제어기계수에 대한 수렴상수에 반비례함을 이론적으로 분석을 통해 알 수 있다. 모의실험을 통하여 제안된 알고리듬이 filtered-x LMS 알고리듬에 바탕을 둔 다른 알고리듬보다 환경변화에 우수한 성능을 보임을 알 수 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.119-126
• /
• 2010

The some papers which deal with the dynamic instability for shell-like structures under the dynamic excitation have been published, but there are few papers which treat the essential phenomenon of the dynamic buckling using the phase plane for investigating occurrence of chaos. In nonlinear dynamic, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and indirect snapping of shallow EP shell considering geometrical nonlinearity are investigated by Galerkin method numerically. This finding out the characteristic of the dynamic instability through the phases curves and running response spectrum.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.47-57
• /
• 2000

A two-stage iterative Fourier transform algorithm, based on hybrid input-output algorithm and new Pnoise algorithm, is used to design continuous and quantized phase-only diffractive pattern elements which produce arbitrary given intensity patterns via Fraunhofer diffraction. Numerical results for two $128\times128$ binary patterns and two grayscale patterns are compared with those of other algorithms. It is found that the algorithm yields better signal-to-noise ratio and even better uniformity with slightly lower diffraction efficiency than other algorithms. We investigated the dependence of performance on parameters used in the algorithm, size of noise region, and the number of phase levels for quantized elements. In the case of quantized phase elements, the size of noise region plays a greater role in determining the performance of the algorithm than given intensity pattern itself. tself.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.478-491
• /
• 1987

In this paper, an all Digital Phase-Locked Loop(DPLL) has been propoed, which has reduced the phase error by using a half period sampling in order to improve the performance of the conventional DPLL which tracks the phase of incoming sinusoidal signal once per cycle for the Positive Going Zero crossing(PGZC) of the signal. The proposed DPLL tracks the phase of input signal twice per cycle with two samplers for the PGZC. So the loop has a half reduction of the steady state phase error fluctuation ranges without decreasing the lock-range in a whole, comparing with that of the conventional DPLL. Also, it has been known that the proposed loop is rapidly locked to input signal for the same valves of phase differenc between sucessive samples and quantization level. The analytic results of the proposed loop have been verified by computer simulation for the practically requeired conditions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.1-7
• /
• 2010

A new frequency offset estimation algorithm for chirp spread spectrum based on matched filter is proposed. Generally, the differential phase between successive symbols is used for the conventional frequency offset estimation algorithm. However, if the conventional frequency offset estimation algorithm is used for CSS, phase ambiguity arises because of long symbol duration and guard time. The phase ambiguity causes performance degradation of matched filter since the received signal is corrupted by the integer frequency offset. In this paper, we propose a new frequency offset estimation algorithm which separates integer and fractional frequency offset estimation for removing the phase ambiguity. The proposed algorithm estimates the integer frequency offset by using differential phase between matched filtering results of sub-chirps and successive symbols. Then, the fractional frequency offset is estimated by using the differential phase between successive symbols Simulation results show that the proposed algorithm well removes the phase ambiguity, and have almost same estimation performance compared with conventional one when there is not the phase ambiguity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2535-2540
• /
• 2002

ESPI is a noncontact, nondestructive and relatively fast inspection method. For these reasons ESPI is being applied as a valuable tool in the nondestructive evaluation of structural components. Phase shifting ESPI is used more effectively than the traditional ESPI because spatial resolution of small object displacements are improved and numerical phase values are obtained for all pixels in the image. Consequently the quantitative measurement of deformation is possible. ESPI fringe patterns are contaminated with high levels of speckle noise. Therefore the phase image is to be smoothed to remove the noise and obtain a better signal-to-noise ratio. In this study, smoothing is done by phase shifting convolution to avoid smoothing errors close to the 2$\pi$ phase ambiguities in the deformation phase image, and median filter is used as a smoothing filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.617-626
• /
• 2010

In this paper, we have proposed and experimentally performed a polarization and phase control method of an optical signal which has same wavelength with the optical carrier to improve phase characteristics of a continuous wave(CW) generated by the double sideband-suppressed carrier(DSB-SC) as one of the famous photomixing technique for making sub-millimeter and terahertz waves. A polarization and phase controlled optical signal has been coupled with the general DSB-SC on an optical coupler. The output of the optical coupler is then photomixed by a photomixer. From our analysis and measurement results, we have found that the amplitude of the generated sub-mm and terahertz CW signal is higher 1.5 dB and the phase noise is lower about 3 dB@10 kHz offset frequency than the general DSBSC. Consequently, since our proposed method has improved the amplitude and phase noise of CW signals in the sub-mm and terahertz bands, it can be helpful results to make low cost CW generator in sub-millimeter and subterahertz bands.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.423-428
• /
• 2010

In this paper, we analyzed the characteristics of thermal deformation of the TPS which is a core part of engine in vehicle by measuring out-of-plane deformation using ESP!. Inspection area of a test piece was minimized to 5 cm by 5 cm by using a high resolution CCD and a zoom lens. 4-step phase shifting method was used along with phase unwrapping algorithm to get a continuous phase map, configurations and deformations were displayed as 3D images. When heating the test pieces while maintaining the temperature at about $70^{\circ}C$, the out-of-plane deformations were measured. The results showed that a test piece with longer distance traveled tends to show larger thermal deformation, we could observes a convex shaped deformation on the surface. The inner defect sample, we could monitor discontinuous pattern phase map, and a concave shaped deformation on the surface.