• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.63-63
• /
• 2003

• 소음진동
• /
• 제9권6호
• /
• pp.1210-1217
• /
• 1999

This paper presents schematic process of identifying the principal cause to make the vibration problem of rotating circular saws. In the tandem pencil slat saw lines, feeding of cedar blocks is often stopped because excessive motro current is required in a saw motor. These events are called "kick-offs" in technical reports. Research on saw behavior at kick-offs is required to understand are reduce the frequency and severity of kick-offs events. This research aims at finding out the principal cause of kick-offs, and evloving design improvements for high cutting performance with fewer and less severe kick-offs. Measurements of critical speed, cutting force, cutting temeprature and dynamic displacements are carried out to observe the instability mechanism and also to obtain saw design parameters for the numerical analyses. And the numerical analyses involving FEM and multiple scale method are utilized to show the possibility of the principal cause.pal cause.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.48-56
• /
• 2021

Tungsten carbide (WC) circular saws have been widely used to cut plywood. Recently, expensive polycrystalline diamond (PCD) were adopted to extend the tool life of circular saws. This study developed a PCD-WC combination circular saw and compared its performance with that of existing WC and PCD saws. Flank wear of WC saw blades and edge chipping of rectangular PCD was observed during the experiments. The PCD-WC saw replaced half of the chamfered teeth with PCD and applied tough WC for all rectangular teeth. In the experiments, edge chipping was not observed in rectangular WC teeth and the flank wear of chamfered teeth was decreased compared with that of conventional circular saws.

• 융합보안논문지
• /
• 제21권3호
• /
• pp.25-30
• /
• 2021

현재 코로나-19 팬데믹 현상으로 인해 기업이나 기관에서는 원격근무를 제공하는 상황에서 안전한 근무환경을 구축하기 위해 논리적 망 분리 기술 중 하나인 가상화 데스크톱 기술을 도입하고 있다. 가상화 데스크톱 기술을 도입함에 따라 기업이나 기관에서는 망분리 환경을 보다 안전하고 효과적으로 운영할 수 있게 되었으며, 업무망에 신속하고 안전하게 접근해 업무 효율성과 생산성을 높일 수 있게 되었다. 그러나 가상화 데스크톱 기술을 도입함에 있어, 높은 사양의 서버와 스토리지, 라이선스의 비용적인 문제가 있으며, 운용 및 관리적인 측면에서의 보완이 필요한 실정이다. 이에 대응하기 위한 방안으로 기업이나 기관에서는 클라우드 컴퓨팅 기반의 기술인 가상 데스크톱 서비스(DaaS, Desktop as a Service)로 전환하는 추세이다. 하지만 클라우드 컴퓨팅 기반의 기술인 가상 데스크톱 서비스에서 공동책임모델은 사용자 접근 통제와 데이터 보안은 사용자에게 책임이 있다. 이에 본 논문에서는 가상 데스크톱 서비스 환경에서 공동책임 모델을 근거로, 사용자 접근 통제와 데이터 보안에 대한 개선 방안으로 클라우드 기반 하드웨어 보안 모듈(CloudHSM)과 edge-DRM Proxy를 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.121-122
• /
• 2012

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.272-272
• /
• 2005

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.98-104
• /
• 2022

Circular sawing and milling are general machining processes used for routing fiber-reinforced plastics (FRP). In this study, the productivity and cutting quality of a circular saw and flat endmill were compared. As a result, the productivity of the circular saw was approximately ten times higher than that of the endmill for the same tool life, and the burr size of the circular saw was 14 times smaller than that of the flat-end mill. The spectrogram analysis of the cutting sound also showed that the acoustic emission of the circular saw was more uniform than that of the flat end mill. Circular sawing is thus a more suitable process for the straight cutting of pultrusion FRP than a flat endmill.

• 한국응용곤충학회지
• /
• 제45권1호
• /
• pp.87-90
• /
• 2006

톱다리개미허리노린재(Riptortus clavatus)의 집합페로몬 트랩에 먹이(건조 대두 + 건조 땅콩 + 물)를 첨가함으로써 트랩의 유인력을 증가시킬 수 있는지를 수반트랩과 원형트랩을 사용하여 조사하였다. 수반트랩의 경우, 페로몬+먹이를 달아준 트랩이 페로몬 만 달아준 트랩이나 무처리 트랩보다 더 많은 수의 암컷과 수컷을 유인하였다. 원통형트랩에서도 페로몬 + 먹이를 달아준 트랩이 더 많은 암수성충과 약충을 유인하는 경향이 있었지만 통계적 차이는 없었다. 페로몬 트랩에 먹이를 첨가하는 것이 트랩의 유인력을 증가시킬 수 있을 것으로 판단되지만 트랩형태와 유인력에 관한 앞으로의 연구가 요망된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.729-732
• /
• 2004

An experimental and numerical approach has been carried out for to see the noise characteristics of a circular diamond saw. The noise level measurement result for the several kinds of shanks shows us that the noise level reduction in high frequency range could be an effective way to control the noise problem. Sandwich type shank whose center part is laminated with a low Young‘s modulus material greatly reduces the noise level. The noise level for the shank where several curve shaped slits are provided in the circumferential direction is reduced considerably too. The response spectrum analysis by the FEM shows us to be an alternative for predicting the noise characteristics of the shank.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.883-886
• /
• 2001

The mechanical properties such as the Young's modulus, damping ratio, vibration mode and hardness of the disk materials heat-treated under various conditions are measured, and the relations between there properties and the cutting characteristics such as early tip fracture are examined. The results obtained from this study are as follows. The circular saw with the V-Cr added disk has higher young's modulus and damping ratio than the saw with STC5 disk, preventing the early fracture of tungsten carbide due to the above properties. The circular saw with the disk which is subjected to the heat treatment at the quenching temperature of $830^{\circ}C$ and at the temperature of $550^{\circ}C$ have the best tool life and surface roughness.