• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.619-628
• /
• 2000

Abstract Perspective views provide a powerful depth cue and thus aid the interpretation of complicated images. The main drawback of current perspective volume rendering is the long execution time. In this paper, we present an efficient perspective volume rendering algorithm based on coherency between rays. Two sets of templates are built for the rays cast from horizontal and vertical scanlines in the intermediate image which is parallel to one of volume faces. Each sample along a ray is calculated by interpolating neighboring voxels with the pre-computed weights in the templates. We also solve the problem of uneven sampling rate due to perspective ray divergence by building more templates for the regions far away from a viewpoint. Since our algorithm operates in object-order, it can avoid redundant access to each voxel and exploit spatial data coherency by using run-length encoded volume. Experimental results show that the use of templates and the object-order processing with run-length encoded volume provide speedups, compared to the other approaches. Additionally, the image quality of our algorithm improves by solving uneven sampling rate due to perspective ray di vergence.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.421-431
• /
• 2009

This paper is the study on the verification of structural health monitoring (SHM) algorithm based on the ultrasonic guided wave. An active inspection system using Lamb wave (LW) for SHM was considered. The basic study about the application of this algorithm was performed for detecting the circular notch defect in steel plate. LW testing technique, pitch-catch method, was used for interpretation of circular notch defect with depth of 50% of plate thickness and 7 mm width. Damage characterization takes place by comparing $S_0$ mode sensor signals collected before and after the damage event. By subtracting the signals of both conditions from each other, a scatter signal is produced which can be used for damage localization. The continuous Gabor wavelet transform is used to attain the time between the arrivals of the scatter and sensor signals. A new practical damage monitoring algorithm, based on damage monitoring polygon and pitch-catch method, has been proposed and verified with good accuracy. The possible damage location can be estimated by the average on calculated location points and the damage extent by the standard deviation.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.78-81
• /
• 2009

레일형 GB-SAR의 단점을 극복하고자 차량에 원형레일을 탑재하여 신속한 기동을 확보하고 합성구경의 길이를 늘리며 영상영역을 확장한 ArcSAR를 세계 최초로 설계하고 시작품을 제작하였다. ArcSAR의 핵심기술이라고 할 수 있는 원형레일은 알루미늄 프로파일로 제작한 회전디스크, 곡선가이드, 리니어 가이드로 구성되며, 서보모터를 이용하여 구동된다. 회전디스크의 지름은 2.1 m 이며, 회전 디스크 위에 장착된 곡선 가이드를 따라 안테나가 탑재된 리니어 가이드가 이동하며 정밀한 원형 운행을 하게 된다. 리니어 가이드는 슬라이드식으로 제작되어 최대 3 m 까지 확장이 가능하여 스폿 모드 측정시 6 m 길이의 레일에서의 자료 획득과 유사한 결과를 얻게 된다. SAR 측정 장비는 회전디스크 위에 장착되어 전원을 제외한 별도의 슬립링을 사용을 자제하였다. 레일의 구동과 자료의 획득은 LabVIEW 기반의 통합 제어측정 소프트웨어를 통해 구현하였으며, 실내 실험 및 현장적용 실험을 통해 가능성을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.43-46
• /
• 2006

본 논문에서는 호프변환을 이용한 실시간 수신호 인식시스템에서 대상영역 분할의 오차와 추출된 특징의 위치 변화등의 영향을 개선하는 방법론을 제안한다. 원형호프변환을 기반으로 생성한 특징정보로부터 CNN(Convolution Neural Network) 모델의 계층적 구조를 통하여 단계적으로 일련의 특징지도가 추출된다. CNN 모델에서 샘플링 계층의 연결구조는 특징의 위치 변화에 강인한 추출기능을 지원하며, 상위계층에서 보다 함축적인 특징지도를 생성하게 된다. 원형 호프 변환은 손의 형태학적 주요 포인트를 효과적으로 추출할 수 있게 하고 또한 입력 영상의 회전으로 인한 제약을 극복할 수 있게 한다. 본 연구에서는 제안된 이론을 TV 원격 제어를 위한 수신호 인터페이스 시스템을 대상으로 적용함으로써 그 유용성을 고찰한다.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.121-126
• /
• 2015

This paper proposes a novel reconfigurable microstrip antenna based on alternating a perturbation structure to achieve circular polarization diversity. The proposed antenna consists of an annular ring microstrip radiator for simultaneously loading stub and slot perturbations which support right- and left-handed circular polarization senses and two PIN diodes for choosing the operating polarization sense. By controlling the states of two PIN diodes between perturbing slot and stub at one diagonal corner of the radiator, reconfigurable circular polarization senses of the proposed antenna are successfully obtained and alternated. The proposed antenna has been theoretically analyzed and experimentally demonstrated at 2.4 GHz of S-band for satellite communication system. The simulation and measurement results of the proposed antenna show in good agreement with the reflection coefficients, axial-ratios, realized antenna gains, and radiation patterns.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.750-751
• /
• 2011

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.323-333
• /
• 2007

In this paper, a new MDAS-DR antenna structure designed to efficiently shape a flat-topped radiation pattern is proposed. The antenna structure is composed of a stacked micro-strip patch exciter and a multi-layered disk array structure(MDAS) surrounded by a dielectric ring. The MDAS, which was supplied by a stacked microstrip patch exciter with radiating power, can form a flat-topped radiation pattern in a far field by a mutual interaction with the surrounding dielectric ring. Therefore, the design parameters of the dielectric ring and the MDAS structure are important design parameters for shaping a flat-topped radiation pattern. The proposed antenna used twelve multi-layered disk array elements and a Teflon material with a dielectric constant of 2.05. An antenna operated at 10 GHz$(9.6\sim10.4\;GHz)$ was designed in order to verify the effectiveness of the proposed antenna structure. The commercial simulator of CST Microwave $Studio^{TM}$, which was adapted to a 3-D antenna structure analysis, was used for the simulation. The antenna breadboard was also fabricated and its electrical performance was measured in an anechoic antenna chamber. The measured results of the antenna breadboard with a flat-topped radiation pattern were found to be in good agreement with the simulated one. The MDAS-DR antenna gain measured at 10 GHz was 11.18 dBi, and the MDAS-DR antenna was capable of shaping a good flat-topped radiation pattern with a beam-width of about $40^{\circ}$, at least within a fractional bandwidth of 8.0 %.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.63-72
• /
• 1997

본 논문은 분사제트 주위에 형성되는 와류를 조절하여 제트를 제어하기 위하여 유동가시화, 속도분포 및 난류성분을 측정하는 실험을 수행하였다. 와류를 조절하기 위한 방법으로 제트노즐 주위에 환형관을 설치하여 환형관으로부터 2차제트를 분사 또는 흡입함으로써 제트주위에 형성되는 전단류를 변화시켰다. 2차제트 분사시 주제트 주위에 형성되는 와류의 발달을 억제함으로써 제트 포텐셜코어의 길이가 아주 길어지는 제트유동을 얻을 수 있었다. 환형관으로부터 주제트주위의 유체를 흡입하는 경우 제트주위의 전단류가 흡입비 R=1.3∼l.65에서 대류불안정성에서 절대불안정성으로 바뀜으로써 형성된 와류가 하류에서 제트중심부까지 발전, 결합되는 것을 방지하여 더 긴포텐셜코어와 중심에서 낮은 난류강도를 얻었다. 위의 결과는 환형관 주위에 부착한 깃의 높이 변화에 따라서 변화하였는데, 이것은 깃이 환형관을 통한 흡입유동의 유로역할을 함으로써 제트밖으로부터 흡입되는 것을 방지할 수 있었다. 분사제트 벡터링을 위하여 제트노즐 주위의 환형관을 이등분하여 한쪽으로만 제트주위의 유동을 흡입함으로써 제트주위에 다른 전단류를 형성함과 동시에 Coanda효과를 이용하여 분사제트를 편향시켰다. 편향되는 정도 및 난류성분은 홉입속도 비에 따라서 크게 바뀌었다.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.72-79
• /
• 2009

This paper describes a compact microstrip active antenna with dual polarization. The antenna, receiving both a left-hand circularly polarized wave and a right-hand circularly polarized wave, has a function of polarization diversity. A square-shaped empty room is located on the inside of the microstrip radiator so that the size has been reduced. And slots are added around feeding point to improve input matching. Also, amplifier and switching circuitry are placed at the empty room to increase antenna gain and to select one of the circular polarizations, respectively. The proposed antenna has been applied to GPS(global positioning system). The measurement results show that it has 10dB-impedance bandwidth, 3dB axial bandwidth of about 50MHz, 3dB beamwidth of 90degree, and gain of 13dBi, respectively, for RHCP. Also, it has 3dB axial bandwidth of about 50MHz, 3dB beamwidth of 84 degree, and gain of 12dBi, respectively, for LHCP.